A 10.0-kg monkey climbs a uniform ladder with weight w = 1.09 x 10 N and length L = 3.40 m as shown in the figure below. The ladder rests against the wall at an angle of 6 = 60°. The upper and lower ends of the ladder rest on frictionless surfaces, with the lower end fastened to the wall by a horizontal rope that is frayed and that can support a maximumtension of only 80.0 N.Rope(a) Draw a force diagram for the ladder. (Submit a file with a maximum size of 1 MB.)(b) Find the normal force exerted on the bottom of the ladder.N(c) Find the tension in the rope when the monkey is two-thirds of the way up the ladder.N(d) Find the maximum distancethat the monkey can climb up the ladder before the rope breaks.m(e) If the horizontal surface were rough and the rope were removed, how would your analysis of the problem be changed and what other information would you need to answer Parts (c) and (d)?

Answered: Image /qna-images/answer/a08daf50-af48-4bde-8e52-499604cc69a7.jpg

A 10.0-kg monkey climbs a unform ladder with weight w1.09 x 10 Nand lengthL340 mas shon in the figure belo. The ladder rests against the wall at an angle of 60. The upper and lover ends of the ladder rest on frictionless surfaces. with the lower end fastened to the wall by a horiaontal rope that is frayed and that can support a maximum tension of enly 80.0 N. (a) Drawa force diagram for the ladder. (Submit a fle with a maimum sie of : MB.) (b) Find the normal force eerted on the bottom of the ladder (e) Find the tension in the N the monkey is bethirds of the way vo the ladden (d) Find the maximum distance d that the monkey can cimb up the ladder before the rope breaks. (e) f the horiaontal surface were rough and the rope were removed. how would your analysis of the problem be changed and what other information would you need to anser Parts (c) and (d)?

A 10.0-kg monkey climbs a unform ladder with weight w1.09 x 10 Nand lengthL340 mas shon in the figure belo. The ladder rests against the wall at an angle of 60. The upper and lover ends of the ladder rest on frictionless surfaces. with the lower end fastened to the wall by a horiaontal rope that is frayed and that can support a maximum tension of enly 80.0 N. (a) Drawa force diagram for the ladder. (Submit a fle with a maimum sie of : MB.) (b) Find the normal force eerted on the bottom of the ladder (e) Find the tension in the N the monkey is bethirds of the way vo the ladden (d) Find the maximum distance d that the monkey can cimb up the ladder before the rope breaks. (e) f the horiaontal surface were rough and the rope were removed. how would your analysis of the problem be changed and what other information would you need to anser Parts (c) and (d)?

Physics for Scientists and Engineers with Modern Physics

10th Edition

ISBN:9781337553292

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter12: Static Equilibrium And Elasticity

Section: Chapter Questions

Problem 14P: A 10.0-kg monkey climbs a uniform ladder with weight 1.20 102 N and length L = 3.00 m as shown in...

See similar textbooks

Similar questions

A stepladder of negligible weight is constructed as shown in Figure P10.73, with AC = BC = ℓ. A painter of mass m stands on the ladder a distance d from the bottom. Assuming the floor is frictionless, find (a) the tension in the horizontal bar DE connecting the two halves of the ladder, (b) the normal forces at A and B, and (c) the components of the reaction force at the single hinge C that the left half of the ladder exerts on the right half. Suggestion: Treat the ladder as a single object, but also treat each half of the ladder separately. Figure P10.73 Problems 73 and 74.
A uniform beam resting on two pivots has a length L = 6.00 m and mass M = 90.0 kg. The pivot under the left end exerts a normal force n1 on the beam, and the second pivot located a distance = 4.00 m from the left end exerts a normal force n2. A woman of mass m = 55.0 kg steps onto the left end of the beam and begins walking to the right as in Figure P10.28. The goal is to find the womans position when the beam begins to tip. (a) What is the appropriate analysis model for the beam before it begins to tip? (b) Sketch a force diagram for the beam, labeling the gravitational and normal forces acting on the beam and placing the woman a distance x to the right of the first pivot, which is the origin. (c) Where is the woman when the normal force n1 is the greatest? (d) What is n1 when the beam is about to tip? (e) Use Equation 10.27 to find the value of n2 when the beam is about to tip. (f) Using the result of part (d) and Equation 10.28, with torques computed around the second pivot, find the womans position x when the beam is about to tip. (g) Check the answer to part (e) by computing torques around the first pivot point. Figure P10.28
A 10.0-kg monkey climbs a uniform ladder with weight 1.20 102 N and length L = 3.00 m as shown in Figure P12.14. The ladder rests against the wall and makes an angle of = 60.0 with the ground. The upper and lower ends of the ladder rest on frictionless surfaces. The lower end is connected to the wall by a horizontal rope that is frayed and can support a maximum tension of only 80.0 N. (a) Draw a force diagram for the ladder. (b) Find the normal force exerted on the bottom of the ladder. (c) Find the tension in the rope when the monkey is two-thirds of the way up the ladder. (d) Find the maximum distance d that the monkey can climb up the ladder before the rope breaks. (e) If the horizontal surface were rough and the rope were removed, how would your analysis of the problem change? What other information would you need to answer parts (c) and (d)? Figure P12.14
A wooden door 2.1 m high and 0.90 m wide is hung by two hinges 1.8 m apart. The lower hinge is 15 cm above the bottom of the door. The center of mass of the door is at its geometric center, and the weight of the door is 260 N, which is supported equally by both hinges. Find the horizontal force exerted by each hinge on the door.
A stepladder of negligible weight is constructed as shown in Figure P12.40, with AC = BC = = 4.00 m. A painter of mass m = 70.0 kg stands on the ladder d = 3.00 m from the bottom. Assuming the floor is frictionless, find (a) the tension in the horizontal bar DE connecting the two halves of the ladder, (b) the normal forces at A and B, and (c) the components of the reaction force at the single hinge C that the left half of the ladder exerts on the right half. Suggestion: Treat the ladder as a single object, but also treat each half of the ladder separately. Figure P12.40 Problems 40 and 41.
In Figure P10.40, the hanging object has a mass of m1 = 0.420 kg; the sliding block has a mass of m2 = 0.850 kg; and the pulley is a hollow cylinder with a mass of M = 0.350 kg, an inner radius of R1 = 0.020 0 m, and an outer radius of R2 = 0.030 0 m. Assume the mass of the spokes is negligible. The coefficient of kinetic friction between the block and the horizontal surface is k = 0.250. The pulley turns without friction on its axle. The light cord does not stretch and does not slip on the pulley. The block has a velocity of vi = 0.820 m/s toward the pulley when it passes a reference point on the table. (a) Use energy methods to predict its speed after it has moved to a second point, 0.700 m away. (b) Find the angular speed of the pulley at the same moment. Figure P10.40
A rod 7.0 m long is pivoted at a point 2.0 m from the left end. A downward force of 50 N acts at the left end, and a downward force of 200 N acts at the right end. At what distance to the right of the pivot can a third force of 300 N acting upward be placed to produce rotational equilibrium? Note: Neglect the weight of the rod. (a) 1.0 m (b) 2.0 m (c) 3.0 m (d) 4.0 m (e) 3.5 m
A uniform ladder of length L and mass m1 rests against a frictionless wall. The ladder makes an angle with the horizontal. (a) Find the horizontal and vertical forces the ground exerts on the base of the ladder when a firefighter of mass m2 has climbed a distance x along the ladder from the bottom. (b) If the ladder is just on the verge of slipping when the firefighter is a distance d along the ladder from the bottom, what is the coefficient of static friction between ladder and ground?
A uniform plank of length 5.0 m and weight 225 N rests horizontally on two supports, with 1.1m of the plank hanging over the right support. To what distance x can a person who weighs 377 N walk on the overhanging part of the plank before it just begins to tip?
A 10.0-kg monkey climbs a uniform ladder with weight w = 1.09 ✕ 102 N and length L = 3.40 m as shown in the figure below. The ladder rests against the wall at an angle of ? = 60°. The upper and lower ends of the ladder rest on frictionless surfaces, with the lower end fastened to the wall by a horizontal rope that is frayed and that, can support a maximum tension of only 80.0 N.
A person is standing on a section of uniform scaffolding as shown in the figure. The section of scaffolding is L = 1.50 m in length, has a ms = 24.5 kg mass and is supported by three ropes as shown. Determine the magnitude of the tension in each rope when a person with a weight of Wp = 640 N is a distance d = 0.700 m from the left end. magnitude of T1 N magnitude of T2 N magnitude of T3 N
A person is standing on a section of uniform scaffolding as shown in the figure. The section of scaffolding is L = 1.50 m in length, has a ms = 25.5 kg mass, and is supported by three ropes as shown. Determine the magnitude of the tension in each rope when a person with a weight of Wp = 660 N is a distance d = 0.700 m from the left end.