A 100W CPU with a size of 10x 10 cm is cooled at steady state with 25°C water that is pumped through a water cooler sitting on top of the CPU. The speed of water washing the surface of the CPU is 6.2 m/s, which produces a heat transfer coefficient of 250 W/m2-K. Calculate the surface temperature of the CPU, in °C.

A 100W CPU with a size of 10x 10 cm is cooled at steady state with 25°C water that is pumped through a water cooler sitting on top of the CPU. The speed of water washing the surface of the CPU is 6.2 m/s, which produces a heat transfer coefficient of 250 W/m2-K. Calculate the surface temperature of the CPU, in °C.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter44: Geothermal Heat Pumps

Section: Chapter Questions

Problem 1RQ: Geothermal heat pumps, or water-source heat pumps, are classified as either _____loop or _____loop...

See similar textbooks

Similar questions

A 100W CPU with a size of 10x 10 cm is cooled at steady state with 25°C water that is pumped through a water cooler sitting on top of the CPU. The speed of water washing the surface of the CPU is 6.2 m/s, which produces a heat transfer coefficient of 250 W/m²-K. Calculate the surface temperature of the CPU, in "C
A 600-MW steam power plant, which is cooled by a nearby river, has a thermal efficiency of 40 percent. Deter- mine the rate of heat transfer to the river water. Will the actual heat transfer rate be higher or lower than this value? Why?
Explain the energy is recognized as heat transfer only as it crosses the system boundary?
Determine the expressions for the thermal efficiencies and coefficients of performance for reversible heat engines, heat pumps, and refrigerators.
A household refrigerator that has a power input of 450 W and a COP of 2.5 is to cool five large watermelons, 10 kg each, to 8°C. If the watermelons are initially at 20°C, determine how long it will take for the refrigerator to cool them. The watermelons can be treated as water whose spe- cific heat is 4.2 kJ/kg · °C. Is your answer realistic or opti- mistic? Explain. Answer: 2240 s
An oil-transfer pump uses 1 kW of power in transferring 5 kg/s of oil through a 3-cm-diameter pipe. The changes in kinetic and potential energies are essentially zero, and the process is adiabatic. Additionally, there is no appreciable temperature change in the oil, which has a density of 1500 kg/m³. Determine the change in pressure from inlet to exit.
A refrigeration system in a cooling-section of a dairy plant is being designed to cool eggs (p= 67.4 lbm/ft3 and Cp= 0.80 Btu/lbm · °F) with an average mass of 0.14 lbm from an initial temperature of 90°F to a final average temperature of 50°F by air at 34°F at a rate of 10,000 eggs per hour. If the cooling-section is well-insulated, determine (a) the rate of heat removal from the eggs, in Btu/h, and (b) the required volume flow rate of air, in ft3/h, if the temperature rise of air is not to exceed 10°F. You can take the specific heat of air as 0.24 Btu/lbm.F.
A room measures 4mx7mx5m and the air in it has to be always kept 20 C lower than that of the incoming air. The air inside has to be renewed every 30 minutes. Assuming 75% efficiency, calculate the HP rating of an air-conditioning unit suitable for this purpose. Take specific heat of air as 0.24 and its density as 1.27 kg/m3.
Explain the principle of refrigerator? Show that a reversible heat engine acts as a refrigerator.
A refrigeration system is being designed to cool eggs (ρ = 67.4 lbm/ft3 and cp = 0.80 Btu/lbm·°F) with an average mass of 0.14 lbm from an initial temperature of 90°F to a final average temperature of 50°F by air at 34°F at a rate of 3000 eggs per hour. Determine the rate of heat removal from the eggs, in Btu/h.
A refrigerator is connected to a generator powered by a fuel with a calorific value of 35000 kJ/kg and a density of 0.85 g/cm3 . The inside temperature of the refrigerator is 0°C, and the outside temperature is 20°C. a. How much work is required to freeze 500 g of water? ΔfreezingH° = 6.02 kJ mol– 1 ) b. How much internal energy change occurs during the process? c. Since the generator consumes 5 L of fuel per hour, calculate the thermal efficiency of this engine.
The interior of a refrigerator has a surface area of 6.2 m2 . It is insulated by a 2 cm thick material that has a thermal conductivity of 0.0199 J/m · s · ◦ C. The ratio of the heat extracted from the interior to the work done by the motor is 5.5 % of the theoretical maximum. The temperature of the room is 27.6 ◦C, and the temperature inside the refrigerator is 6.6 ◦C. Determine the power required to run the compressor. Answer in units of W.