Answered: A 1350N window washers platform, 3.5 m…

A 1350N window washers platform, 3.5 m long is suspended by two vertical wires at its ends. A 600N person is standing 2.0m form the right end. What are the tensions on both sides in two wires?

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter14: Static Equilibrium, Elasticity, And Fracture

Section: Chapter Questions

Problem 33PQ: Problems 33 and 34 are paired. One end of a uniform beam that weighs 2.80 102 N is attached to a...

See similar textbooks

Related questions

Q: Forces F→1, F→2, and F→3 act on the structure of the figure, shown in an overhead view. We wish to…

A: Given : a = 1.90 m b = 3.27 m c = 1.31 m F1⇀= 38.1 N F2⇀ = 18.9 N F3⇀ = 2.05 N

Q: A uniform bar whose mass and length are 55.0 kg and 8.00 m, respectively is supported by two light…

A: Given Data : The mass of the bar is given as mb = 55 Kg. The length of the bar is given as L = 8 m.…

Q: A2 m long horizontal uniform beam of mass 16 kg is supported by a wire as shown in the figure. The…

A: Given, Length of beam l = 2 m Mass of beam is mbeam = 16 Kg Angle θ=29∘ Distance where mass attach x…

Q: A uniform beam is 5.00 m long and has a mass of 53.0 kg. The beam is supported in a horizontal…

A: Given:-

Q: Two Boy Scouts, Bobby and Jimmy, are carrying a uniform wooden tent pole 4.80 m in length and having…

Q: A 145 N sign is supported by two ropes. One rope pulls up and to the right ?1=29.5∘ above the…

Q: In the figure below, the uniform 0.60-kN beam is hinged at P. What is the tension in the tie rope?…

A: Given: The lenght of the beam is L. The weight at the end is 800 N. The weight of the beam is 0.6…

Q: The figure below shows a beam of uniform density with a mass of 35.5 kg and a length { = 4.95 m. It…

Q: A door has a height of 2.1 m along a y axis that extends vertically upward and a width of 0.91 m…

A: When the system is in equilibrium, the net force and torque is zero. Since the force is in plane,…

Q: y F1 13 12 5 02° FR F2 F1 = 400 N F2 = 675 N FR =933 N 02 = 45 °

Q: A 10-m long homogenous beam with a weight of 50N is divided into 10 equal parts (1 m each) as shown…

Q: A uniform plank of length 2.00 m and mass 28.5 kg is supported by three ropes, as indicated by the…

Q: A fisherman is balancing a pole on his finger. If a fisherman were to cut the rod along the dashed…

A: Since the fisherman us balancing it on the finger that net torque with respect to that point would…

Q: A ladder weighing 180 N is set against the wall and does not slip. There is friction between the…

A: Given: The weight of the ladder is 180 N. There is no friction force between the wall and ladder.

Q: Physics for Engineer. 1. A 50.0-N body is supported by two ropes, one making 30.0o with the vertical…

A: Given: The weight of the body is 50 N. The first rope is making an angle of 45° with the horizontal.…

Q: 5.00 m 3.00 m 4.00 m 300 N 6. The horizontal beam in the figure weighs 150 N, and its center of…

A: Net torque on the beam about hinge is zero. Mg×4 + mg×2 = T( Sin37) × 4 Given Mg = 300 N mg = 150 N…

Q: A 560 N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal,…

A: Apply the condition of equilibrium. The summation of moments about the hinge.ΣM = 0560(4) + 80(3) -…

Q: Two people, let’s call them person A and person B, carry a uniform board of length 6 meters and…

A: DataLength, L = 6mWeight, W = 150NDistance of A from end 1, a=1mDistance of B from end 2, b=2m…

Q: A uniform beam of length L= 0.18 m and mass mb=0.83 kg is pinned at one end to a vertical wall. A…

A: The weight of the beam acts on the midpoint of the beam at L/2, in downward direction. The tension…

Q: A uniform horizontal beam with a length of 8 m and a weight of 200 N is attached to a wall by a pin…

Q: 1. a) A 4.2 m long beam (m1 = 35 kg) is attached to a wall by a hinge as shown. A light horizontal…

Q: A uniform 34.0-kg beam of length { = 4.55 m is supported by a vertical rope located d = 1.20 m from…

A: Mass of beam = 34 kg Length of beam = 4.55 m distance from left = 1.2 m

Q: A uniform 34.5-kg beam of length e = 4.20 m is supported by a vertical rope located d = 1.20 m from…

Q: A uniform bar whose mass and length are 55.0 kg and 8.00 m, respectively is supported by two light…

Q: An office wants to hang a sign, mass 90 kg, which is supported by a uniform 490 N beam as shown in…

Q: A 1220-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the…

A: a) Balance torque about left end TSin(50°+30°)L = (1960LCos30°)+(1220×LCos30°/2) T = 2260 N

Q: Two forces of magnitude 2F and the square root of F act such that the resultant force is squa root…

A: The dot product is the sum of the product of the corresponding entries of these two sequence of…

Q: 4. A uniform ladder of mass (m = 12.5 kg) and length (L) leans against a frictionless wall, see…

A: Given that:- Mass of ladder=12.5kg

Q: In order to get his car out of the mud, a man ties one end of a rope to the front bumper and the…

Q: 2 m 1 m F E 1.5 m 1.5 m MA H G mc = 30 Kg MB

Q: a uniform beam of length 12.0 m is supported by a horizontal cable and a hinge at angle u =50.0°.…

Q: A fulcrum is placed 1.0 m from the edge of a 3.0 m-long wooden uniform plank of mass 20 kg. A weight…

Q: A man stands a distance d = 0.275 m from the left end of a platform as shown in the figure. The…

A: Answer :- For equilibrium of plank Sigma Fx = 0 T3 + T1 Cos(40)0 = 0 T3 = - T1 Cos (40)0…

Q: Two tension ropes are connected to a wall and subject to forces as shown by the diagram below.…

Q: A door has a height of 2.1 m along a y axis that extends vertically upward and a width of 1.08 m…

Q: A uniform plank of length 2.00 m and mass 30.0 kg is supported by three ropes, as indicated by the…

A: The solution is given by drawing FBD and applying rules of summation of forces and moments.

Q: A 4 kg cat sits on a 30 kg, 4 m long beam that is supported by a cable. She sits 0.5 m in from the…

A: The free-body diagram of the beam is shown below. Here, T denotes the cable's tension, V denotes…

Q: Two painters are carrying a uniform horizontal ladder that is 12 feet long and weighs 200 N. If one…

Q: 1001 N uniform beam is attached to a vertical wall at one end and js supported by a cable at the…

Q: A block resting on a plane inclined at an angle e 32° from the horizontal is being held in place by…

A: From the figure we can see that the angle that the wire c makes with the vertical is, 90-42=48. The…

Q: A wooden plank with a mass of 50.968 kg is supprted by two cable at its ends. At what location…

A: Given,Mass of the wooden block, M = 50.968 Nmass of the block, m =20.387Force on the one clabe is…

Q: A uniform 1200 N beam that is 3.50 m long is suspended horizontally by two vertical wires at its…

Q: A uniform pole 20 feet long and weighing 80 lbs is supported by a boy 2 feet from end A and a man 5…

A: Given that, Length of pole = 20 feet Weight supported by boy = 80 lbs Distance of boy from end A = 2…

Q: A uniform plank of length 2.00 m and mass 32.0 kg is supported by three ropes, as indicated by the…

Q: ► F 60° A

A: Given Data: The mass of plate is m = 75 kg. The length of plate is l = 4 m. The magnitude of force…

Q: A uniform plank of length 2.00 m and mass 31.5 kg is supported by three ropes, as indicated by the…

A: Given that: Length of plank, L=2.00 mMass of plank, M=31.5 kgWeight of person, W=715 NDistance from…

Q: Suppose the weight of the drawbridge in Figure shown is supported entirely by its hinges and the…

Q: A uniform plank of length 2.00 m and mass 25.5 kg is supported by three ropes, as indicated by the…

A: Given, Length uniform plank L = 2 m Mass m = 25.5 Kg Tension on the person Tp = 710 N d = 0.500 m

Q: A 185 N sign is supported by two ropes. One rope pulls up and to the right ?1=29.5∘ above the…

A: Given Weight of the sign boardW=185Nθ1=29.5°θ2=42.5°

Q: A uniform 120-lb beam is supported in a horizontal position by a pin and cable as shown in the…

A: Given, Weight of beam W = 120 lb Length of beam l = 12 ft Angle θ=37∘

Concept explainers

Rotational Equilibrium And Rotational Dynamics

In physics, the state of balance between the forces and the dynamics of motion is called the equilibrium state. The balance between various forces acting on a system in a rotational motion is called rotational equilibrium or rotational dynamics.

Equilibrium of Forces

The tension created on one body during push or pull is known as force.

Question

100%

A 1350N window washers platform, 3.5 m long is suspended by two vertical wires at its ends. A 600N person is standing 2.0m form the right end. What are the tensions on both sides in two wires?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

In order to get his car out of the mud, a man ties one end of a rope to the front bumper and the other end to a tee 15 m away as shown below. He then pulls on the center of the rope with a force of 400 N, which causes its center to be displaced 0.30 m, as shown. What is the force of the rope on the car?
A wooden door 2.1 m high and 0.90 m wide is hung by two hinges 1.8 m apart. The lower hinge is 15 cm above the bottom of the door. The center of mass of the door is at its geometric center, and the weight of the door is 260 N, which is supported equally by both hinges. Find the horizontal force exerted by each hinge on the door.
A horizontal plank 4.00 m long and having mass 20.0 kg rests on two pivots, one at the left end and a second 1.00 m from the right end. Find the magnitude of the force exerted on the plank by the second pivot. (See Section 8.4.)
Problems 33 and 34 are paired. One end of a uniform beam that weighs 2.80 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in Figure P14.33. Find the tension in the cable. FIGURE P14.33 Problems 33 and 34.
A uniform plank of length 2.00 m and mass 26.0 kg is supported by three ropes, as indicated by the blue vectors in the figure below. Find the tension in each rope when a 710–N person is d = 0.500 m from the left end. Answer the 3 boxes below:
A 12m long post is bolted to the wall on its left end. It's right end is held horizontal by a wire that is attached to the wall, making a 35° angle with the post. If the post is 13kg what is the tension in the wire?
Jack and Rose are carrying a uniform rod that is 3.00m long and weighs 160.N. If Rose lifts at one end with an upward force equal to 60.0N, how far from Rose should Jack lift so that the rod will be horizontal and in equilibrium?
A 650-N billboard worker stands on a 4.05-m scaffold weighing 600 N and supported by vertical ropes at each end. How far would the worker stand from one of the supporting ropes to produce a tension of 660 N in that rope?
A spade is modelled as a uniform rod, of mass 2kg and length 90cm, attached to a uniform square lamina, of side 20cm and mass 0.5kg. A gardener holds the spade horizontally with hands 30cm and 60cm from the end of the rod. Find the vertical forces exerted by the gardener's hands. Im stuck on this q, pls help.
A 12m long post is bolted to the wall on its left end. It's right end is held horizontal by a wire that is attached to the wall, making a 35 degree angle with the post. If the post is 13 kg, what is the tension in the wire?
A 185 N sign is supported by two ropes. One rope pulls up and to the right ?1=29.5∘ above the horizontal with a tension ?1, and the other rope pulls up and to the left ?2=42.5∘ above the horizontal with a tension ?2, as shown in the figure. Find the tensions ?1 and ?2.
a horizontal rod (m=5.2 kg) is hinged to a wall at the left end and three forces are acting on the rod as shown in the figure: the force of gravity (mg), a tension force (T), and the force exerted by the hinge (broken into components Fx and Fy) If theta = 35 degrees, what must T be equal to in order to keep the rod static?