A 2.2 m x 0.98 m x 4.0 cm thick solid wood door has a 0.5 m square window. The window has two panes of 0.47 cm thick glass with a 0.2 cm thick space between the glass panes that is filled with argon. Argon is used since it has a thermal conductivity that is 34% lower than that of air. The inside Fo air temperature is 21 °C and the outside temperature is -10 °C. Determine the magnitude of the heat flow through the door. Kwood = 0.10 W/(m-°C) Kglass = 0.84 W/(m.°C) = 0.026 W/(m.°C) %3D Kair (include units with answer)

A 2.2 m x 0.98 m x 4.0 cm thick solid wood door has a 0.5 m square window. The window has two panes of 0.47 cm thick glass with a 0.2 cm thick space between the glass panes that is filled with argon. Argon is used since it has a thermal conductivity that is 34% lower than that of air. The inside Fo air temperature is 21 °C and the outside temperature is -10 °C. Determine the magnitude of the heat flow through the door. Kwood = 0.10 W/(m-°C) Kglass = 0.84 W/(m.°C) = 0.026 W/(m.°C) %3D Kair (include units with answer)

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter2: Steady Heat Conduction

Section: Chapter Questions

Problem 2.39P: The tip of a soldering iron consists of a 0.6-cm- diameter copper rod, 7.6 cm long. If the tip must...

See similar textbooks

Similar questions

A vessel of capacity 7.5 m3 contains the mass of 8 kg of Oxygen gas at a pressure of 180000 N/m2 and a temperature of 338 K. Find the gas constant of Oxygen gas in J/kgK. Gas constant, (J/kgK) =
A cylindrical gas tank 2 m long, inside diameter of 25 cm, is evacuated and then filled with carbon dioxide gas { R = 0.1889 kJ/kg K) at 30°C. To what pressure should it be charged if there should be 1.5 kg of carbon dioxide?
2) Two glass bulbs, one on the left with a volume of 2 liters and the other on the right with avolume of 6 liters, are connected to one another by a thin tube that is initially closed by astopcock. The bulb on the left has 0.1 moles of ideal gas, and the bulb on the right isevacuated. The system is in thermal equilibrium with the surroundings at 300K. When thestopcock is opened, the gas flows out to fill both bulbs. Calculate A for this process. If wewere to insert a propeller to extract work as the gas flows from left to right, what is themaximum amount of work that we could possibly extract?
A car’s tire has a pressure, temperature of 32 psi and 80 deg F, respectively. By mistake,the tire was filled with 0.768 lb of carbon dioxide (R = 0.0451 BTU/lb-R) before deflatingand inflating the tire again with air. Prove that:a. 0.502 lb of air was needed to fill the tire; andb. that there was change of pressure of 6.442 psi when the car started moving andthe temperature increased by 75 deg C.
Helium has a molar mass of 4 kg/kmol. The universal gas constant is 8.314 kJ/kmol.K. By first determining the individual gas constant of helium, calculate and state the temperature of 125 g of helium which occupies a 0.6 m3 container at 2 bar pressure. Enter your answer to FOUR significant figures, and in Kelvin.
A small amount of water of mass m=50 g in a container at temperature T=273 K is placed inside a vacuum chamber which is evacuated rapidly. As a result, part of the water freezes and becomes ice and the rest becomes vapor. The question is in the picture.
Sketch the process on the following state diagrams. For the purposes of your diagram(s), it may beuseful consider that increasing the magnetic field B at a fixed temperature would tend to increase the magnetization M, resulting in a more ordered material (i.e., lower entropy).
For first law thermodynamics , Q-W = E where E is the change in total energy. My question is when should we use q-w = h2-h1 when h is the change in epecific enthalpy and q-w = u2-u1 and u isthe change in specific internal energy?
could you answer d part too please,(For state 1 evaluate the specific volume assuming the steam behaves as an ideal gas and comment on your result). with given data of specific ideal gas constant = 461.5 J/kg K.
A quantity of gas has a pressure of 3.5 bar when the volume and the temperature are 0.03m³ and 35°C respectively. Specific gas constant is 0.29kJ/kgK. Calculated the mass of gas.
In determining the average rate of heating of a tank of 20% sugar syrup, thetemperature at the beginning was 20°C and it took 30 min to heat to 80°C. Thevolume of the sugar syrup was 50 ft3 and its density 66.9 lb/ft3. The specific heat ofthe sugar syrup is 0.9 Btu lb-1°F-1.(a) Convert the specific heat to kJ kg-1°C-1.(b) Determine the rate of heating, that is the heat energy transferred in unit time, in SI units (kJ s-1)
What is non-equilibrium steady state? And what is the difference between non-equilibrium steady state and far from equilbrium condition?