A 30 kW, 4 pole 500 V DC shunt generator has an armature and shunt held resistances of 0.29 ohris and 110 ohms respectively Determine the required number of conductors 2 in order to produce a generated voltage of 520.72 V and flux per pole equal to 8 mWb running at 3200 rpm. The armature winding is said to be in duplex lap winding arrangement

A 30 kW, 4 pole 500 V DC shunt generator has an armature and shunt held resistances of 0.29 ohris and 110 ohms respectively Determine the required number of conductors 2 in order to produce a generated voltage of 520.72 V and flux per pole equal to 8 mWb running at 3200 rpm. The armature winding is said to be in duplex lap winding arrangement

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter32: Three-phase Motors

Section: Chapter Questions

Problem 6RQ: Name three factors that determine the torque produced by an induction motor.

See similar textbooks

Similar questions

An 8 pole DC shunt generator with wave winding has 4800 conductor with 20 turns and average per pole flux is 20 mwb and armature current and armature resistance is 20 A and 0.5 ohm respectively find? (i) Induced emf (ii) Terminal voltage
The 20 KW, Shunt DC Generator ha a four-pole lap winding and generates 216-volts when running at 600-rpm. The armature has 144 slot with 6-conductor per slot, if this armature is rewound, wave connected, find the EMF generated at the same speed and flux per pole.
A 150 kW, 250-volt compound DC generator has its field windings which are connected in long shunt. If the shunt-field winding resistance is 20 ohms, what is the current in the series-field winding? (Note that the series field resistance is connected in series with the armature.)
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. a) Draw the the figure. And find the generated voltage.
A 6 pole, wave wound DC shunt generator has a useful total flux of 420 mWb. The armature winding consists of 220 turns each of 0.004 Q resistance, when running at 900 RPM the armature current is 50 A. If the armature winding reconnected as lap calculate the terminal voltage in case of wave and lap given that the field circuit and the speed kept same.
A short shunt compound DC generator delivers a load current of 30 A at 220 V and has armature, series field and shunt field resistances of 0.05, 0.3 and 200Ω respectively. Calculate the induced emf, the armature current and the voltage regulation. Allow 1 V per brush for contact dro
A shunt generator has an output of 22 kW at a terminal voltage of 220 V. armature and shunt field resistances are 0.05 ohm and 44 ohms, respectively. If the copper loss is equal to the core, friction and windage losses at this load, the over-all efficiency of this generator is nearest to
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. c) write down the factors to improve the generated voltage.
The armature, series field and shunt field resistances of 125 kW, 250 V long shunt cummulative compound DC generator are 0.025 ohms, 0.01 ohms and 30 ohms respectively. If stray power loss at rated load is 5 kW, determine the power in the armature field
A 4 pole dc shunt generator with a shunt field resistance of 100 ohm and an armature resistance of 1 ohm has 378 wave connected conductor in its armature. the flux per pole is 0.02wb, if the load resistance of 10 ohm is connexted across the aemature terminal and the generator driven at 1000rpm, calculate the power obsorbed by load
An 8-pole DC shunt generator with 772 wave-connected armature conductors and running at 500 rpm supplies a load of 10 Ω resistance at a terminal voltage of 230V.The armature and the shunt field resistances are 0.25 Ω and 230 Ω respectively. Find the armature current, induced emf and flux per pole for this machine. [Answer of this question should accompany equivalent circuit diagram ]
An eight-pole DC shunt generator supplies a load of 12.5 ohm at 250 V. Its armature carries wave connected 778 conductors and its armature and field winding resistances are 0.24 ohm and 250 ohm respectively. Find the armature current, the induced emf and the flux per pole. Assume the generator runs in 500 rpm.