A 50 Hz , 120 km long transmission line has an impedance of ( 30+j102) ohm and a total shunt admittance of 10-3 Siemen. The receiving end load is 60 MW at 212 kV with 0.92 power factor lagging. Find the (a) Receiving end current (b) The A and C of the line constants

A 50 Hz , 120 km long transmission line has an impedance of ( 30+j102) ohm and a total shunt admittance of 10-3 Siemen. The receiving end load is 60 MW at 212 kV with 0.92 power factor lagging. Find the (a) Receiving end current (b) The A and C of the line constants

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter5: Transmission Lines: Steady-state Operation

Section: Chapter Questions

Problem 5.7P

See similar textbooks

Related questions

Q: The impedance of a 150 km transmission line is z = 0.08 + j0.48 N / km, and the shunt The admittance…

Q: L-L (line) voltage of the 3-phase 50 Hz 70 km transmission line is 230 kV on the receiver (demand)…

A: Given R = 1 Ω/phase, L = 90 mH/phase, f = 50 Hz The line -Neutral and line to line voltage is…

Q: 230 kV, three-phase transmission line has a per phase series impedance of z = (0. 05 + j0.45) ΩΩ per…

Q: The length of a three-phase power transmission line with a nominal operating voltage of 69 kV is…

Q: 2. A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0-85 p.f. lagging by means of a…

A: Balance 3 phase system. Load is 30MW, 132kV at 0.85 PF lagging. Impedance of transmission line =…

Q: 2. A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0-85 p.f. lagging by means of a…

Q: The figure displays a three-phase delta-connected motor load which is connected to a line voltage of…

A: Dear student as per our guidelines we are supposed to solve only one question in which it should be…

Q: 6. A single-phase 50 Hz generator supplies an inductive load of 5000 k W at a power factor of 0.707…

A: NOTE- “Since you have posted a question with multiple sub-parts, we will solve first three subparts…

Q: An radial express feeder used on rural distribution and is connected to a lumped-sum (or…

A: Dear student as per our guidelines we are supposed to solve only one question in which it should be…

Q: A three-phase transmission line is 200 km long. It has a total series impedance of (25+ jl 10)2 per…

A: Given: A three-phase 200 km long transmission line has: Total series impedance, Z=(25+j110) Ω per…

Q: A three-phase transmission line receiving end voltage is rated at 22 kV. A load of 1500 KW is…

A: Let sending end voltage be Vs Receiving voltage be Vr Regulation=Vs-VrVr. Efficiency =power…

Q: An radial express feeder used on rural distribution and is connected to a lumped-sum (or…

Q: The impedance of a 150 km transmission line is z=0.08+j0.48 ohm/km and the shunt The admittance…

Q: 2. A generation station of 50MW supplied a region which has the following demands: From То Demand…

A: i) The demand and time duration table is shown below: The daily load curve is shown below: The…

Q: 2. A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0-85 p.f. lagging by means of a…

A: The answer value given with the question is incorrect. The solution can be achieved as follows.

Q: Transmission and Distribution of Electric Power Answer the Following Question Please: Q)…

Q: three-phase transmission line receiving end voltage is rated at 21 kV. A load of 1500 KW is…

A: Sending end voltage= recieving end voltage+drop in line. Efficiency =power deliveredpower…

Q: A 3-phase, 50 Hz transmission line 100 km long delivers 20 MW at 0-9 pf. lagging and at 110 kV. The…

A: Given:-L=100kmVR=1103=63.5kv ...............(Reference…

Q: Q5. A single phase overhead transmission line has a supply voltage of 34 kV and a sending end…

Q: A three-phase, 50 Hz power transmission line is 220 km long. It has a total series impedance of…

Q: Q5. A single phase overhead transmission line has a supply voltage of 34 kV and a sending end…

Q: A load of 120 MW at a power factor of 0.65 lagging can be delivered by a 3-phase transmission line.…

Q: The impedance of the 500 km long transmission line is Z = 0.1 + j * 0.4 ohm / km. At the end of the…

A: Given data, Ir=988.1 ∠-68.6°Vr=400 kVZ=50+j200 Ω By using short transmission line equations,…

Q: A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0·85 p.f. lagging by means of a…

A: The three load Z1, Z2 and Z3 have a similar size and stage point, at that point, the 3 stage load is…

Q: 1. A 230-kV, three-phase transmission line has a per phase series impedance of z = and a per phase…

A: Given 230kV, 3 phase transmission line z=0.05+j0.45ohms per km y= j3/4 *10-6 Siemens per km…

Q: A 275 kV, 50 Hz, 65 km transmission line has a series impedance of 0.12 + j0.5 O/km. By neglecting…

A: EFFICIENCY: Efficiency of transmission line is defined as the ratio of receiving end power to…

Q: j0.1 2.0+j0.5 j0.4 j0.2 1.01 3.

A: This question is from "Power System". Under which we are going to find out the "Y-parameter of the…

Q: A ( single phase transmission line 100 km long has the following constants Resistance/km 0 · 25 Ω…

A: Dear student as per our guidelines we are supposed to solve only one question in which it should…

Q: A transmission line is delivering a load of 40 MW at 110 kV and 80% lagging power factor. If the…

A: Types of Power Transmission line Short Transmission line Medium Transmission line Long Transmission…

Q: Please all parts.

A: We are authorized to answer three subparts at a time since you have not mentioned which part you are…

Q: An energy transmission line with a length of 130 km transmits 150MVA of power at 380 kV voltage. The…

A: Given values are -…

Q: Determine the sending end voltage, voltage regulation, the sending end power, and the transmission…

A: Voltage regulation The voltage regulation is defined as the measure of change in the voltage…

Q: A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0.85 p.f. lagging by means of a…

A: Given A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0-85 p.f. lagging by means of a…

Q: Problem 4. A 220-kV, three-phase transmission line has a per phase series impedance z = 0.005 +…

Q: A 60-Hz short transmission line, having R = 0.62 ohms per phase and L = 93.24 millihenrys per phase,…

A: First we will calculate receiving end load current and than sending end voltage sending end…

Q: ) The Primary constants for a certain transmission line operating at 7.5 KHz PRIMARY CONSTANT VALUE…

A: 1.Part a) :- The characteristic impedance of a transmission line is given by :- Z = R + jωLG + jωC…

Q: 3. A 36, 345 kV, 60 Hz, 60 km transmission line has a series impedance z = 0.005 + j0.10 N/km. The…

Q: The transmission loss function of a power network consisting of 2 generators at different buses can…

A: In this question , we will find penalty factor..

Q: a) Line head current, b) Line head voltage, c) Calculate the percent voltage regulation. (Line…

Q: As an electrical power system engineer, you must deal with the representations and performances of…

Q: 6. A single-phase 50 Hz generator supplies an inductive load of 5000 kW at a power factor of 0.707…

A: Total resistance of the line, R= 20*0.0195 = 0.39Ω…

Q: The line-end phase-to-phase voltage of a short three-phase 50Hz transmission line is Ur=31.5 kV.…

A: The line-end phase-to-phase voltage three-phase 50Hz transmission line Receiving end voltage…

Q: A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0-85 p.f. lagging by means of a…

Q: 5. A single-phase 50 Hz generator supplies an inductive load of 5000 kW at a power factor of 0.707…

Q: A transmission line is 300 km long and the terminated to its characteristic impedance. the line has…

Q: A 3-phase, 50 Hz overhead transmission line, 100 km long, 110 kV between the lines at the receiving…

A: Calculate the resistance per phase,

Q: A 3-phase, 50 Hz, 55 km long overhead line supplies 500 kW at 22 kV, 0.6 p.f. lagging. The line…

Q: 2. A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0-85 p.f. lagging by means of a…

A: As per our guidelines we are supposed to answer only one question. Kindly repost other questions as…

Q: A three phase transmission line is 390 km long. The series impedance of the line is (0.315+ jo.653)…

A: Part (a): The total impedance of the transmission line is determined as: Z=0.315+j0.653 Ω/km390…

Q: A three-phase transmission line receiving end voltage is rated at 21 kV. A load of 1250 KW is…

Concept explainers

Distribution System

The final stage in the delivery of the electric power is the electric power distribution system. From the transmission system to the individual customers it carries electricity. The distribution system is connected with the transmission system and is used to lower the voltage of the transmission to medium voltage in the range of 2 kV to 35 kV with the help of transformers. This medium voltage to the distribution transformers located near the customer's premises is carried by the primary distribution system lines. These distribution transformers in turn lower the voltage to utilization voltage used in lightings, household appliances, industrial equipments etc. Through secondary distribution lines often several customers are supplied from one transformer. It is through service drops, the commercial and residential customers are connected to the secondary distribution system lines. Customers who demand a larger amount of power can be connected directly to the primary distribution system level or the sub-transmission level.

Question

A 50 Hz , 120 km long transmission line has an impedance of ( 30+j102) ohm and a total shunt admittance of 10^-3Siemen. The receiving end load is 60 MW at 212 kV with 0.92 power factor lagging. Find the (a) Receiving end current (b) The A and C of the line constants.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A small manufacturing plant is located 2 km down a transmission line, which has a series reactance of 0.5/km. The line resistance is negligible. The line voltage at the plant is 4800V(rms). and the plant consumes 120kW at 0.85 power factor lagging. Determine the voltage and power factor at the sending end of the transmission line by using (a) a complex power approach and (b) a circuit analysis approach.
A 40-km, 220-kV, 60-Hz, three-phase overhead transmission line has a per-phase resistance of 0.15/km, a per-phase inductance of 1.3263 mH/km, and negligible shunt capacitance. Using the short line model, find the sending-end voltage, voltage regulation, sending-end power, and transmission line efficiency when the line is supplying a three-phase load of (a) 381 MVA at 0.8 power factor lagging and at 220 kV and (b) 381 MVA at 0.8 power factor leading and at 220 kV.
A three-phase line, which has an impedance of (2+j4) per phase, feeds two balanced three-phase loads that are connected in parallel. One of the loads is Y-connected with an impedance of (30+j40) per phase, and the other is -connected with an impedance of (60j45) per phase. The line is energized at the sending end from a 60-Hz, three-phase, balanced voltage source of 1203V (rms. line-to-line). Determine (a) the current, real power. and reactive power delivered by the sending-end source: (b) the line-to-line voltage at the load: (C) the current per phase in each load: and (d) the total three-phase real and reactive powers absorbed by each load and by the line. Check that the total three- phase complex power delivered by the source equals the total three-phase power absorbed by the line and loads.
A 60 Hz, three-phase transmission line is 100 miles long. It has a total seriesimpedance of {35 + j120) n and a shunt admittance of j930 μsiemen. It delivers40 MW at 220 kV with 90% lagging power factor. Find the voltage at the sendingend by:(a) short line approximation(b) the nominal rr approximation(c) the nominal T approximationAlso determine the voltage regulation for the given line and the power loss.Assume the sending end voltage remains constant. Expected Answer: (a) 237.67 kV, 1.4284 MW, 8.03%; (b) 225.8 kV, 1.1642 MW, 8.67% (c) 225.10 kV, 1.5095 MW, 8.35% Pls. Provide Full Solution for thumbs up
A short 3 phase transmission line, connected to a 33kV, 50 Hz generating station at the sending end is required to supply a load of 10Megawatts at 0.8 power factor lagging, 30kV at the receiving end. If the minimum transmission line efficiency is to be limited to 96%, estimate the per phase values of resistance and inductance of the line.
A short 3-phase transmission line connected to a 33kV, 50 Hz generating station at the sending end is required to supply a load of 10 MW at 0.8 lagging power factor at 30 kV at the receiving end. If the minimum transmission efficiency is to be limited to 96%, estimate the per phase value of resistance and inductance of the line.
A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0•85 p.f. lagging by means of a transmission line. The series impedance of a single conductor is (20 + j52) ohms and the total phases-neutral admittance is 315 microsiemens. Shunt leakage may be neglected. Using the nominal T approximation, calculate the line voltage at the sending end of the line. If the load is removed and the sending end voltage remains constant, find the percentage rise in voltage at the receiving end.
(Q) A 10 mile transmission line with an impedance of (0.122+j0.849) Ω per mile is delivering 230A at 230kV and 0.8 power factor lagging. Determine: the sending end voltage the line efficiency and regulation
A three phase transmission line is 370 km long. The series impedance of the line is (0.294+ j0.724) Ω/km and the susceptance is (j6.17x e(-6)) S/km. The voltage at the sending end is 470 kV. (a)Find the sending end current and receiving end voltage when there is no load on the line. (b)Suppose a medium transmission line and determine the maximum permissible line length if the receiving end at no-voltage is not to exceed 430 kV.
A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0·85 p.f. lagging by means of a transmission line. The series impedance of a single conductor is (20 + j52) ohms and the total phases-neutral admittance is 315 microsiemens. Shunt leakage may be neglected. Using the nominal T approximation, calculate the line voltage at the sending end of the line. Find the percentage change in voltage at the receiving end.
Question-2) The parameters of a three-phase transmission line are given as Z = (12.84 + j72, 76)Ω and y = j5, 83x10^-4 mho. At the end of the line, a power of 55 MVA with a power factor of 0.8 is drawn under 132 kV voltage. Accordingly, calculate the line head voltage, active and reactive power values per line, and voltage regulation of the line using the nominal π circuit.7-) Since 55 MVA power is drawn from the end of the line under the conditions mentioned above, calculate the line head voltage (phase-phase voltage) and enter it in the box below. (The value will be entered in kiloVolts. Only the amplitude value of the voltage will be entered. The phase value will NOT be entered!!! Two digits after the comma will be sufficient. )8-) Since 55 MVA power is drawn from the end of the line under the conditions mentioned above, calculate the active power value per line and enter it in the box below. (The value will be entered in MegaWatt. It will be sufficient to take two digits after…
A 230 kV, three-phase transmission line has a per phase series impedance of z = (0. 05 + j0.45) ΩΩ per Km and a per phase shunt admittance of y = j(3.4×10−6×10−6) siemens per km. The line is 80 km long. Using the nominal ππ model, determine(a) The transmission line ABCD constants. Find the sending end voltage and current, voltage regulation, the sending end power and the transmission efficiency when the line delivers(b) 200 MVA, 0.8 lagging power factor at 220 kV.(c) 306 MW, unity power factor at 220 kV.