A 600 MW coal-fired power plant has an overall thermal efficiency of 38%. It is burning coal that has a heating value of 12,000 Btu/lb, an ash content of 5%, a sulfur content of 3,0%, and a CO2 emission factor of 220 IWmillion Bin. Calculate the heat emitted to the environment (Btu/sec), the coal feed rate (tons/day), the degree (%) of sulfur dioxide control needed to meet an emission standard of 0,15 lh SO2/inillion Bin of heat input, and the CO2 emission rate (metric tons/day).

A 600 MW coal-fired power plant has an overall thermal efficiency of 38%. It is burning coal that has a heating value of 12,000 Btu/lb, an ash content of 5%, a sulfur content of 3,0%, and a CO2 emission factor of 220 IWmillion Bin. Calculate the heat emitted to the environment (Btu/sec), the coal feed rate (tons/day), the degree (%) of sulfur dioxide control needed to meet an emission standard of 0,15 lh SO2/inillion Bin of heat input, and the CO2 emission rate (metric tons/day).

Sustainable Energy

2nd Edition

ISBN:9781337551663

Author:DUNLAP, Richard A.

Publisher:DUNLAP, Richard A.

Chapter3: Fossil Fuel Resources And Use

Section: Chapter Questions

Problem 13P

See similar textbooks

Similar questions

Determine the energy consumption (BTU/min), If two 50-kg LPG tanks are needed per 24-hour operation, heating value for the LPG of 11,000 kcal/kg. Subject: Civil Engineering: Thermodynamics
Which emits more SOx per unit amount of electricity produced; a coal-fired plant with a 90% efficient SO2 scrubber or an oil-fired plant with m scrubber? Assume the coal has a heat content of 13,000 Btu/lb and contains 3.5% sulfur, and that the oil has a heat content of 6.0(10)* Biu/barrel (42 gallons) and contains 0.9% sulfur, Assume the oil has a specific gravity of 0,92.
When 1 cu ft of natural gas is burned, 1,050 Btu of heat are produced. In oneday, a building uses 761,250 Btu of heat. How many cubic feet of gas areburned?
Consider a 400-MW, 32 percent efficient coal-fired power plant that uses cooling water withdrawn from a nearby river (with an upstream flow of 10-m3/s and temperature 20 °C) to take care of waste heat. The heat content of the coal is 8,000 Btu/lb, the carbon content is 60% by mass, and the sulfur content is 2% by mass. How much electricity (in kWh/yr) would the plant produce each year? How many pounds per hour of coal would need to be burned at the plant? Estimate the annual carbon emissions from the plant (in metric tons C/year). If the cooling water is only allowed to rise in temperature by 10 °C, what flow rate (in m3/s) from the stream would be required? What would be the river temperature if all the waste heat was transferred to the river water assuming no heat losses during transfer? Estimate the hourly SO2 emissions (in kg/h) from the plant assuming that all the sulfur is oxidized to SO2 during combustion.
A 440-MW coal-fired power plant is burning coal that contains 185 ppb of mercury. The coal firing rate is 300,000 Ib/hr, and the flue gas flow rate is 1.0 million scfm
A new coal-fired power plant has been built using a sulfur emission control system that is 70 percent efficient. If all of the sulfur oxidizes to SO2 and if the emission of SO2 are lmited to 0.6 lb SO2 per million Btu of heat into the power plant, what maximum percent sulfur content can the fuel have if 15,000 Btu/lb coal is burned?
A 100-MW coal-burning electricity generating station operates at 33% efficiency burning coal containing 5% ash and 2% sulfur. Assume a coal heat content of 30 kJ/g. If 95% of the ash and 50% of the sulfur are trapped before emission from the stack by a filter, calculate (a) the emission rate to the atmosphere of ash and sulfur, in g/s and (b) the removal rate to the filter of ash and sulfur, in g/s .
A 1000 MW coal fired power plant (30% efficiency). The coal is 75% carbon and has a heat content of 10, 000 BTU/lb. What is the carbon emission (ton carbon per year)?A 1000 MW natural gas plant (45% efficiency). The gas is CH4 with a heat content 800 BTU/mol. What is the carbon emission (ton carbon per year)?Calculate carbon emission reduction if the above natural gas plant is used to replace the coal fired plant.(Here ton is metric ton, 1 ton=2,200 lb)
For a building located in Madrid, Spain with annual heating degree-days (dd) of 4654, a heating load (heat loss) of 30,000 kj/h, and a design temperature difference of 30° C (20° C indoor), estimate the annual energy consumption. If the building is heated with a furnace with an efficiency of 92%, how muchgas is burned to keep the home at 20° C? State your assumptions.
The Energy Efficiency Rating (EER) of an air-conditioning unit is defined asthe ratio of the heat removed in Btu/h divided by the energy used in watts.The EEI (Edison Electric Institute) names an air-conditioning unit as anEnergy Star unit if it has an EER of 13 or greater. A 21⁄2-ton air-conditioningunit uses 2.41 kilowatts (2,410 watts) of energy. One ton is equivalent to12,000 Btu/h. Can this unit be termed an Energy Star unit?
Design of a community biogas plant for a village consisting of 114 families, each family consisting of 5 persons (adults). Two children are equivalent to one person. Village survey report gives the following information’s about cattle’s Cows 185 (10 kg/day); Oxes 135 (12 kg/day); Buffalo 75 (15 kg/day) ; pig 10 ( 3 kg/day); Gas produced from 1 kg of gobar in winter and summer 42 litre and 55 litre. Gas required for cooking/person/day = 0.227 m3 ,Gas required for lighting 100 cp lamp per hour = 0.126 m3 Each family is allotted 2 lamps, which would burn 3 hours daily, Density of slurry 1090 kg/m3 and retention time 35days. Design the following parameters (i) gas required for cooking& Lighting (ii) Diameter of digester Diameter d=
As a plant maintenance engineer, you are required to purchase a 3,000 L tank of liquid butane to heat a maintenance building during the winter. You are concerned about the tank rupture and the possibility of a vapour cloud explosion of all the butane. How far (in metres) must the tank be from the maintenance building to ensure that it will receive only partial demolition in the event of an explosion? The specific gravity of liquid butane is 0.6, and the energy of explosion for butane is 510 kcal/gm-mol. Assume the explosion efficiency is 10 % in this case.