As a plant maintenance engineer, you are required to purchase a 3,000 L tank of liquid butane to heat a maintenance building during the winter. You are concerned about the tank rupture and the possibility of a vapour cloud explosion of all the butane. How far (in metres) must the tank be from the maintenance building to ensure that it will receive only partial demolition in the event of an explosion? The specific gravity of liquid butane is 0.6, and the energy of explosion for butane is 510 kcal/gm-mol. Assume the explosion efficiency is 10 % in this case.

As a plant maintenance engineer, you are required to purchase a 3,000 L tank of liquid butane to heat a maintenance building during the winter. You are concerned about the tank rupture and the possibility of a vapour cloud explosion of all the butane. How far (in metres) must the tank be from the maintenance building to ensure that it will receive only partial demolition in the event of an explosion? The specific gravity of liquid butane is 0.6, and the energy of explosion for butane is 510 kcal/gm-mol. Assume the explosion efficiency is 10 % in this case.

Sustainable Energy

2nd Edition

ISBN:9781337551663

Author:DUNLAP, Richard A.

Publisher:DUNLAP, Richard A.

Chapter15: Geothermal Energy

Section: Chapter Questions

Problem 19P

See similar textbooks

Similar questions

A thermal oxidizer incinerator operates as a plug flow reactor at a temperature of 250 deg C. The first order rate constant for vinyl chloride removal is 45/sec at 250 degrees C and the inside diameter of the incinerator (which is shaped like a cylinder) is 1 m. (a) If the pollutant (Vinyl chloride) enters the incinerator at a flow rate of 3,000 m3/min and it is desired to remove 99.99% of the pollutant, what should the length of the incinerator be? (b) What is the length of the incinerator if the desired removal is increased to 99.99995%?
2 m^3/min of a light oil are to be heated from 20C to 100C (with zero vaporization) in an exchanger using 250 kPa steam of 90% quality. The heat losses to the surrounding air have been estimated to be 5% of the heat transferred from the condensing steam to the oil. If the steam condensate leaves at its saturation point, what mass of steam per hour will be used in the exchanger? For light oil, Specific gravity= 0.88Specific heat= 2.00 kJ/kg-KFor steam at 250 kPa,Saturated liquid: hf= 535.49 kJ/kg vf= 0.001067 m^3/kgSaturated vapor: hg= 2716.8 kJ/kg vg= 0.7188 m^3/kg
The Energy Efficiency Rating (EER) of an air-conditioning unit is defined asthe ratio of the heat removed in Btu/h divided by the energy used in watts.The EEI (Edison Electric Institute) names an air-conditioning unit as anEnergy Star unit if it has an EER of 13 or greater. A 21⁄2-ton air-conditioningunit uses 2.41 kilowatts (2,410 watts) of energy. One ton is equivalent to12,000 Btu/h. Can this unit be termed an Energy Star unit?
4. An igloo or Eskimo hut is built in the form of a hemispherical shell with an inside diameter of 12 ft. If the igloo is constructed of snow blocks having a uniform thickness of 2ft and weighing 40 lb per cu. ft, find the weight of the igloo, neglecting entrance. Also, if fresh air contains 0.04 per cent carbon dioxide, find the amount this gas in the igloo when freshly ventilated.
Explain how working of a fixed dome biogas plants.
Determine the energy consumption (BTU/min), If two 50-kg LPG tanks are needed per 24-hour operation, heating value for the LPG of 11,000 kcal/kg. Subject: Civil Engineering: Thermodynamics
You serve as the president of XYZ corporation, which is an energy intensive manufacturing operation. You have four boilers to produce steam and electricity for your operations. One is a semi-suspension fired boiler with a capacity of 100 tons of coal per hour. The boiler can also burn supplemental fuel such as coconut or macadamia nut shells. The other three boilers arc peaking units and burn fuel oil. The City of Podunk has approached you about the possibility of burning solid waste as a supplemental fuel. As the president of the XYZ Corporation, you need to develop answers to many political, social, and technical questions before you make a commitment to the city. a. What specific questions would you ask your own power plant engineer about the possibility of accepting Podunk’s MSW? b. What specific additional data would you need from the city before you discuss this further?
Compare the masses and volumes of water, concrete, sand, and wood needed to store 106 Btu of heat if the operating temperatures are Tc = 85F and Th = 180F. In each case, calculate the edge length of a square storage unit with a height of 8 ft.
4. A town is covered by an inversion layer 500 m above the ground. The town’s area isapproximately rectangular with dimensions 9 km by 12 km. The incoming air is clean andthe wind is blowing at 3 m/s, parallel with the 12 km side of the town. SO2 emissions inthe town come from a number of small sources and average 0.0008 mg/m2-s. An industrialplant also emits 2,150 kg/day of SO2. Assume the air above the town is well-mixed.Calculate the state-state concentration of SO2 in the town’s air.
The enthalpy of combustion of benzoic acid (C6 H5 COOH) is commonly used as the standard for calibrating constant-volume bomb calorimeters; its value has been accurately determined to be −3226.7 kJ/mol. When 1.9862 g of benzoic acid are burned in a calorimeter, the temperature rises from 21.84°C to 25.67°C. What is the heat capacity of the bomb? (Assume that the quantity of water surrounding the bomb is exactly 2000 g.)
conversion: Given 200 ppmv SO2 (@STP), what isthe SO2 emission rate in lb/hr.
An incinerator burns 180 lb/hr chlorobenzene and has a stack gas containing 7% oxygen by volume on a dry basis. Determine the percent excess air .