A 9.0-m-long string is wrapped around a pulley that is free to rotate a pulley that is free to rotate about a fixed axle. The pulley has a radius of 6.0 cm and initially is at rest. The thickness of the string is negligible. Someone pulls on the free end of the string, thereby unwinding it and giving the pulley an acceleration of +17.0 rad/s². (a) Through what angle has the pulley rotated when the string is completely unwound? (b) What is the final angular velocity of the pulley?

A 9.0-m-long string is wrapped around a pulley that is free to rotate a pulley that is free to rotate about a fixed axle. The pulley has a radius of 6.0 cm and initially is at rest. The thickness of the string is negligible. Someone pulls on the free end of the string, thereby unwinding it and giving the pulley an acceleration of +17.0 rad/s². (a) Through what angle has the pulley rotated when the string is completely unwound? (b) What is the final angular velocity of the pulley?

Name: I need help with this physics problem A 9.0-m-long string is wrapped a
Uploaded: 2024-03-20T06:58:04.000Z
Channel: Bartleby
Description: I need help with this physics problem A 9.0-m-long string is wrapped around a pulley that is free to rotate a pulley that is free to rotate about a fixedaxle. The pulley has a radius of 6.0 cm and initially is at rest. The thickness of the string is

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter3: Motion In Two Dimensions

Section: Chapter Questions

Problem 30P: A point on a rotating turntable 20.0 cm from the center accelerates from rest to a final speed of...

See similar textbooks

Similar questions

A space station is constructed in the shape of a hollow ring of mass 5.00 104 kg. Members of the crew walk on a deck formed by the inner surface of the outer cylindrical wall of the ring, with radius r = 100 m. At rest when constructed, the ring is set rotating about its axis so that the people inside experience an effective free-fall acceleration equal to g. (See Fig. P10.52.) The rotation is achieved by firing two small rockets attached tangentially to opposite points on the rim of the ring. (a) What angular momentum does the space station acquire? (b) For what time interval must the rockets be fired if each exerts a thrust of 125 N? Figure P10.52 Problems 52 and 54.
A disk 8.00 cm in radius rotates at a constant rate of 1200 rev/min about its central axis. Determine (a) its angular speed in radians per second, (b) the tangential speed at a point 3.00 cm from its center, (c) the radial acceleration of a point on the rim, and (d) the total distance a point on the rim moves in 2.00 s.
A wheel 2.00 m in diameter lies in a vertical plane and rotates about its central axis with a constant angular acceleration of 4.00 rad/s2. The wheel starts at rest at t = 0, and the radius vector of a certain point P on the rim makes an angle of 57.3 with the horizontal at this time. At t = 2.00 s, find (a) the angular speed of the wheel and, for point P, (b) the tangential speed, (c) the total acceleration, and (d) the angular position.
Figure P10.18 shows the drive train of a bicycle that has wheels 67.3 cm in diameter and pedal cranks 17.5 cm long. The cyclist pedals at a steady cadence of 76.0 rev/min. The chain engages with a from sprocket 15.2 cm in diameter and a rear sprocket 7.00 cm in diameter. Calculate (a) the speed of a link of the chain relative to the bicycle frame, (b) the angular speed of the bicycle wheels, and (c) the speed of the bicycle relative to the road, (d) What pieces of data, if any, are not necessary for the calculations?
In testing an automobile tire for proper alignment, a technicianmarks a spot on the tire 0.200 m from the center. He then mountsthe tire in a vertical plane and notes that the radius vector to thespot is at an angle of 35.0 with the horizontal. Starting from rest,the tire is spun rapidly with a constant angular acceleration of 3.00 rad/s2. a. What is the angular speed of the wheel after 4.00 s? b. What is the tangential speed of the spot after 4.00 s? c. What is the magnitude of the total accleration of the spot after 4.00 s?" d. What is the angular position of the spot after 4.00 s?
During a certain time interval, the angular position of a swinging door is described by = 5.00 + 10.0t + 2.00t2, where is in radians and t is in seconds. Determine the angular position, angular speed, and angular acceleration of the door (a) at t = 0 and (b) at t = 3.00 s.
Two buckets of mass m1 = 20.5 kg and m2 = 12.7 kg are attached to the ends of a massless rope, which passes over a pulley with a mass of m = 8.13 kg and a radius of r = 0.350 m. Assume that the rope does not slip on the pulley and that the pulley rotates without friction. The buckets are released from rest, and begin to move. If the larger bucket is a distance d = 1.95 m above the ground when it is released, with what speed v will it hit the ground?
If the CD rotates clockwise at 500 rpmrpm (revolutions per minute) while the last song is playing, and then spins down to zero angular speed in 2.60 ss with constant angular acceleration, what is ααalpha, the magnitude of the angular acceleration of the CD, as it spins to a stop? Assuming that the CD spins down with a constant angular acceleration. in units of rad/s^2
A child’s toy consists of a small wedge that has an acute angle of 34◦. The sloping side of the wedge is frictionless, and the wedge is spun at a constant speed by rotating a rod that is firmly attached to it at one end. When the mass of 41 g rises up the wedge a distance 46 cm and stays there, what is the speed of the mass? The acceleration of gravity is 9.8 m/s2 .
a solid brass ball of mass 0.280 g will roll smoothly along a loop-the-loop track when released from rest along the straight section. The circular loop has radius R = 14.0 cm, and the ball has radius r < R. (a) What is h if the ball is on the verge of leaving the track when it reaches the top of the loop? If the ball is released at height h = 6.00R, what are the (b) magnitude and (c) direction of the horizontal force component acting on the ball at point Q?
A yo-yo-shaped device mounted on a horizontal frictionless axis is used to lift a 27 kg box as shown in the figure. The outer radius R of the device is 0.61 m, and the radius r of the hub is 0.22 m. When a constant horizontal force F→app of magnitude 150 N is applied to a rope wrapped around the outside of the device, the box, which is suspended from a rope wrapped around the hub, has an upward acceleration of magnitude 0.95 m/s2. What is the rotational inertia of the device about its axis of rotation?
A yo-yo is constructed of two brass disks whose thickness b is 8.5mm and whose radius R is 3.5cm, joined by a short axle whose radius Ro is 3.2mm. A. What is the rotational inertia about its central axis? Neglect rotational inertia of the axle. The density p is 8400kg/m^3. B. A string of length l=1.1m and of negligible thickness is wound on the axle. What is the linear acceleration of the yo-yo as it rolls down the string from the rest?