A balanced Y - connected load having a 25 2 resistance in each leg is connected to a three -phase , four wires, Y-connected ABC sequence AC generator, if the line volatge EAB=180Z- 10° v, calculate 1. The phase voltages of the generator 2. The phase voltages of the load 3. The phase currents of the load

A balanced Y - connected load having a 25 2 resistance in each leg is connected to a three -phase , four wires, Y-connected ABC sequence AC generator, if the line volatge EAB=180Z- 10° v, calculate 1. The phase voltages of the generator 2. The phase voltages of the load 3. The phase currents of the load

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.24MCQ: Consider a three-phase Y-connected source feeding a balanced- load. The phasor sum of the line...

See similar textbooks

Similar questions

Two three-phase generators supply a three-phase load through separate three-phase lines. The load absorbs 30 kW at 0.8 power factor lagging. The line impedance is (1.4+j1.6) per phase between generator G1 and the load, and (0.8+j1) per phase between generator G2 and the load. If generator G1 supplies 15 kW at 0.8 poir factor lagging, with a terminal voltage of 460 V line-to-line, determine (a) the voltage at the load terminals. (b) the voltage at the terminals of generator G2, and (c) the real and reactive power supplied by generator G2. Assume balanced operation.
A balanced Y - connected load having a 25 Ω resistance in each leg is connected to a three -phase , four wires, Y-connected ABC sequence AC generator, if the line volatge EAB=, calculate 1. The phase voltages of the generator 2. The phase voltages of the load 3. The phase currents of the load 4. The line currents
A balanced Δ - connected load having a 15 Ω resistance in each leg is connected to a three -phase , four wires, Y-connected ABC sequence AC generator, if the line volatge EAB=, calculate 1. The phase voltages of the generator 2. The phase voltages of the load 3. The phase currents of the load 4. The line currents
A balanced Y - connected load having in each leg a 10 Ω resistance in series with 10 Ω inductive reactance is connected to a three -phase , four wires, Y-connected ABC sequence AC generator, if the line volatge EAB=120 angle 0 degree space v, calculate 1. The phase voltages of the generator 2. The phase voltages of the load 3. The phase currents of the load 4. The line currents
30. A 30-Y-connected load is connected between three line terminals, R, Y, B, the impedances (in ohms) of the load being: (I + 2) between R and the star point. (2+3) between Y and the star point and (3+j4) between B and the star point. The phase sequence is RYB. If the line voltage is 400 V, calculate the voltage between R and the star point. [181 V]
A balanced Y load having a load of 3 + j4 Ω in each leg is connected to a three-phase, three wire, Δ-connected generator having a line voltage of 120 V. What Are: Line Voltage (EL), Generator Phase Voltage (), and Load Phase Voltage ()? Load Phase Current (), Generator Phase Current (), and Line Current (IL)? Phase Real Power (P) and Phase Reactive Power (Q)? Total Real Power (P) and Total Reactive Power (Q)?
A balanced Y-connected load is connected to 3-phase transmission lines with line-to-line voltages of 21.5 kV. The current in each line is 75 A. What are the phase impedances of the Y-connected load?
1. Solve the following problem: A THREE-PHASE CIRCUIT WHERE THE BALANCED DELTA LOAD OF 36 + J54 OHMS IS SUPPLIED BY 8,602 OHMS IMPEDANCE CONDUCTORS WITH A PHASE ANGLE OF 54,462 DEGREES. IF THE GENERATOR VOLTAGE IN PHASE B IS 100 VOLTS ANGLE - 120 DEGREES. CALCULATE: A) THE VOLTAGE BC IN LOAD. B) THE POWERS IN THE CONDUCTORS. C) THE POWER TRIANGLE IN THE LOAD.
The load connected to a 3-phase supply comprises three similar coils connected in star. The line currents are 22 A and the kVA rating and power input are 25 kVA and 12 kW respectively. (a) Find the line and phase voltage. (b) If the coils are now connected in delta to the same three phase supply, calculate the line current and phase current
An Alternator having three-phase, 3-wire ABC system supplying an effective line voltage of 120 V, has an athree-impedances of 50 / 45 ohms in Delta connection. Assume that Vbc is the reference vector. Determine a) linecurrent and line voltages with its degrees, b)Draw the current –voltage phasor diagram c) and the power generated inthe line quantities of the alternator.
A balanced delta-connected load has phase impedances of 4+j3 Ohms. It is connected to balanced transmission lines, with Vab = 1.5kV @ 15 degrees. a) What is the current through each of the load phases? b) What is the current through each of the transmission lines? c) Which ACSR cable should be used for these transmission lines to give a 20% current rating margin for this load?
The power input to a three-phase motor is measured by the two wattmeter method. The three line voltages are 220 V and the current in each of the three line wires is 8 A. If the three-phase power factor is 0.866 lag, what are the values of power indicated by wattmeter 1 and wattmeter 2