a) Calculate the variable and constant losses. b) Find the power required at the input of the generator. c) Determine the efficiency of the generator. d) If the load current is reduced to 60%, determine the variable and constant losses for this condition. e) Determine the efficiency of the generator if the load current is reduced to 60% at a terminal voltage of 220 V.

a) Calculate the variable and constant losses. b) Find the power required at the input of the generator. c) Determine the efficiency of the generator. d) If the load current is reduced to 60%, determine the variable and constant losses for this condition. e) Determine the efficiency of the generator if the load current is reduced to 60% at a terminal voltage of 220 V.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

A 220V short-shunt compound generator has armature resistance, series field resistance and shunt field resistances of 0.6, 0.44 and 300 - 16 respectively. If the generator supplies a 10+16 kW load at a rated voltage, find the induced voltage in the armature. Ignore armature reaction. Find the efficiency if the mech and core loss is 500W
Determine the e.m.f. generated of a short-shunt compound generator supplies 100 A at 400 V. If the field resistance, Rf =20 Ω, and the armature resistance, Ra =0.06 Ω. If you know that the volt drop in series winding is 2 V
A 150-kW 250-volt compound generator is connected long shunt. If the shunt field resistance is 20 ohms, what is the series field-current at full load? (Ans.: 612.5 A) write diagram, given, etc
Q1) A long shunt compound generator is supplying a load 100 A at a terminal voltage of 220 V. The armature, series and shunt field resistances are 0.2 2, 0.06 2 and 100 Q respectively. The iron loss is 400 W and the rotational loss is 500 W. a) Calculate the variable and constant losses. b) Find the power required at the input of the generator. c) Determine the efficiency of the generator. d) If the load current is reduced to 60%, determine the variable and constant losses for this condition. e) Determine the efficiency of the generator if the load current is reduced to 60% at a terminal voltage of 220 V.
A long-shunt, four pole, 1500-W, 250-V, duplex wave-wound DC compound generator with the rated speed of 500 r.p.m., has a shunt field resistance of 100 Ω, a series field resistance of 0.05 Ω and an armature resistance of 0.2 Ω. If the flux per pole is 48.798 mWb and a total of 620 conductors, calculate the following: (a) the generated voltage, (b) the field currents, (c) the power generated in the armature.
Problem: The field current of a 100-kW, 250V shunt generator is 5A when delivering power at rated terminal voltage and rated load current. The combined armature and brush resistance is 0.1 ohm. 1.)Calculate the generated power in kW. 2.)What is the electrical efficiency? * Formatt: given required solution answer
A shunt generator supplies a 33kW load at 225V through cables of resistance, R = 100mΩ. If the field winding resistance, Rf =56Ω and the armature resistance, Ra =40mΩ. Determine the following below: The terminal voltage is, The e.m.f. generated in the armature is,
A shunt generator supplies a 20kW load at 200V through cables of resistance, R= 100mΩ. If the field winding resistance, Rf =50Ω and the armature resistance, Ra =40mΩ, determine (a) the terminal voltage, and (b) the e.m.f. generated in the armature
A long shunt compound generator delivers 100 A at 250 V. The armature, shunt field and series field resistances are 0.02 Ohms, 50 Ohms and 0.05 Ohms respectively. If the Break Horse Power (BHP) or the power developed by the shaft torque of the driving engine is 40, determine the stray loss.
6) A 15kW shunt generator having an Armature circuit Resistance of 0.2Ω and a field resistance of 200Ω, generates a terminal voltage of 220 V at full load. Find the Efficiency of the Generator at full load. Assume the Iron, Friction, and Windage losses are 0.5 kW.
A 10 kW shunt generator having an armature circuit resistance of 0.75 ohm and a field resistance of 125 ohm, generates a terminal voltage of 250V at full load. Determine the efficiency of the generator at full load, assuming the iron, friction and windage losses amount to 600W.
A 12 KW shunt generator having an armature circuit resistance of 0.8 Ω and a field resistance of 120 Ω,generates a terminal voltage of 240 V at full load. Determinate the efficiency of the generator at full load,assuming the iron(core), mechanical and stray losses amount is 800 W.