can you please help me with this question from the start A cantilever beam is under a concentrate load P (N), the beam has a length of L (m).PLyWrite a function to find the internal shear force V(x) (N) and moment M(x) (N*m) at any given position along the beam x = a. In [65]: # Complete the function given the variables P, L, a and return the shear force as "Va" and internal moment as"Ma".## Don't change the predefined content, only fill your code in the region "YOUR CODE"def BeamInternal(P, L, a):' 'Compute internal shear force V(x) and moment M(x) at any given position x=a.Parameters: LoadL : Beam length: Arbitrary position along the beam x=aaStep 1: Cut the beam at any position x=a, and determine the shear force and moment formulaStep 2: Write down the internal force at given position V(x=a) and M(x=a)# def V(x):P = 10 # Assuming Load to rod to be 10NL = 10 # Assuming length of rod to be 10mif(x>10 and x<0):return 'Not in the rod'else:return -P # As shear force inside rod is -Pdef M(x):P = 10 # Assuming Load to rod to be 10NL = 10 # Assuming length of rod on positive face to be 10mif(x>10 and x<0):return'Not in the rod'else:return P* (x-L) # As bending moment inside rod on positive face is P(x-L)print (V(2))print(M(2))return Va, Ma # # Make sure in your solution, you use the same name"Va" and "Ma" for the outputs. Here, there areFile "/tmp/ipykernel_55/3866599776 .py", line 41return Va, Ma # # Make sure in your solution, you use the same name "Va" and "Ma" for the outputs. Here, there are two outputsIndentationError: unexpected indent

Given : To find : function for internal shear force and bending moment

A cantilever beam is under a concentrate load P (N), the beam has a length of L (m). P L y Write a function to find the internal shear force V(x) (N) and moment M(x) (N*m) at any given position along the beam x = a.

A cantilever beam is under a concentrate load P (N), the beam has a length of L (m). P L y Write a function to find the internal shear force V(x) (N) and moment M(x) (N*m) at any given position along the beam x = a.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The beam shown below carries point and linearly distributed loads and is supported by a pin on the left and a roller on the right. Note that rollers can be assumed to react to either tensile or compressive loads. a) For each beam, draw all necessary free-body diagrams using the method of sections and find functions for the internal shear force (V(x)) and bending moment (M(x)) due to the external forces where x is a horizontal coordinate along the length of each beam, measured from the left end of each beam, as shown in the figure. Your expression(s) must allow to obtain internal reactions for 0≤x≤L, where L is the length of each beam. Make sure you use the numerical values of the reactions at the supports to get your expressions. Note that “k” stands for “kip” (1000 lbs) in the labels for the point loads and distributed loads. 6 k X -2'- 3'- 8 k/ft -3' 6 k/ft
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a = 2.2 m, b = 4.4 m, c = 3 m, P = 16 kN, w = 34 kN/m, and Q = 26 kN. Label all significant points on each diagram and identify the maximum shear force and bending moment along with their respective locations. Additionally:(a) Determine V and M in the beam at a point located 0.65 m to the right of B.(b) Determine V and M in the beam at a point located 1.40 m to the left of C.Note that answers may be positive or negative. Here, "maximum" refers to the largest magnitude value, but you should enter your shear force and bending moment with the correct sign, using the sign convention presented in Section 7.2 of the textbook. If the magnitudes of the largest positive and largest negative values are the same, enter a positive number.
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Leta = 5.2 ft, w = 235 Ib/ft, Mp = 7000 lb-ft, and P = 11001b. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. Mp Determine the bending moment acting at each of the following locations: (a) x = 5.2 ft (i.e., at point B) (b) x = 10.4 ft (i.e., at point C) (c) x = 15.6 – ft (i.e., just to the left of point D) (d) x = 15.6 + ft (i.e., just to the right of point D) (e) x = 20.8 ft (i.e., at point E) When entering your answers, use the bending moment sign convention.
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let w = 20.0 kips/ft, a=6.0 ft, and b=20.5 ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. y A A Answers: By a = Calculate the reaction forces By and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Bx = O, it has been omitted from the free-body diagram.) = a i B Cy i = W B b W b kips X kips X
Q#4: A continuous beam AB, 6 m long having three supports is loaded as shown in Fig.2. Construct the shear force and bending moment diagrams for the beam and find the position and value of maximum bending moment. S KN 4 KN/m 2 KN/m E 1.5 m D 1.5 m 3 m 6m
Q.3) (a) Find the support reactions of the beam shown below. (b) Find the shear-force and the bending-moment in the beam at point B. (c) Write the expressions for shear-force (V) and bending-moment (M) for the beam as a function of distant 'x' from the left-end support of the beam. 100 lb/ft 300 lb A •C D K4 ft 4 ft 2 ft 2 ft
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let w = 20.0 kips/ft, a=6.0 ft, and b=20.5 ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. a A B a W Calculate the reaction forces By and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Bx = O, it has been omitted from the free-body diagram.) B b b X C X
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let w=20.0 kips/ft, a=6.0 ft, and b=20.5 ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. y A a A a O B₁ B Calculate the reaction forces By and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Bx = 0, it has been omitted from the free-body diagram.) W B b W b C C₂ X
Note: Include all necessary free-body diagrams. Q.1) (a) Find the support reactions of the beam shown below. (b) Find the shear-force and the bending-moment in the beam at point B. (c) Write the expressions for shear-force (V) and bending-moment (M) for the beam as a function of distant 'x' from the left-end support of the beam. A | 1 100 lb/ft 4 ft 4 ft B 300 lb C O 1 2 ft 2 ft D
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a = 3.8 m, b = 7.6 m, c = 5.1 m, P = 11 kN, w = 41 kN/m, and Q = 29 kN. Label all significant points on each diagram and identify the maximum shear force and bending moment along with their respective locations. Additionally: (a) Determine V and M in the beam at a point located 0.50 m to the right of B. (b) Determine V and M in the beam at a point located 1.15 m to the left of C. Note that answers may be positive or negative. Here, "maximum" refers to the largest magnitude value, but you should enter your shear force and bending moment with the correct sign, using the sign convention presented in Section 7.2 of the textbook. If the magnitudes of the largest positive and largest negative values are the same, enter a positive number. В a b Answer: Vmax kN Mmax kN•m (a) Vx1= kN Mx1 = kN•m (b) Vx2 = kN Mx2 = kN•m
1. The cantilever beam AH is acted upon by a uniformly distributed downward load of intensity 4P/L(force/length)between A and B, a concentrated moment M-2PL at C, and a vertical force Pat D. Using P=20kN and L=1.2 m, construct the shear force and bending moment diagrams for the beam. Mark numerical values for points A through H, along with max/min values on these diagrams. 4P/L Mo L/4 L/4 L/4 L/4 A C H V(x)/P M(x)/PL
For the simply supported beam subjected to the loading shown, derive equations for the shear force Vand the bending moment M for any location in the beam. (Place the origin at point A.) Let a=2.50 m, b=4.25 m, PB = 45kN, and Pc = 90kN. Construct the shear- force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. Answers: Ay = Dy= Mi i B Calculate the reaction forces Ay and Dy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) PB a PB B a Pc a Pc C kN b KN b D X D₂ X