A centrifugal pump operating under steady flow conditions delivers (2000 + 905) kg/min of water from an initial pressure of [100 + (905/2)] kPa to a final pressure of [1000 + 2905] Pa. The diameter of the inlet pipe to the pump is 20 cm and the diameter of the discharge pipe is 8 cm. What is the work done?

A centrifugal pump operating under steady flow conditions delivers (2000 + 905) kg/min of water from an initial pressure of [100 + (905/2)] kPa to a final pressure of [1000 + 2905] Pa. The diameter of the inlet pipe to the pump is 20 cm and the diameter of the discharge pipe is 8 cm. What is the work done?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The Head -flowrate curve for a centrifugal pump is given by: HP = 28 -30Q2 Where, HP is in meter and Q is in m3/s . This pump is used to pump water for a system with the following (H-Q) curve: HS = 8 + 150Q2 Where, HS is in meter and Q is in m3/s . What is the resulting flow rate in the system if three pumps are used in series? (a) 0.56 m^3/s (b) 0.48 m^3/s (c) 0.33 m^3/s (d) 0.36 m^3/s HINT: what is the resulting Flow-rate in the system if three pumps are used in series ? Choose correct option above
A centrifugal pump rotates at n. = 750 rpm. Water enters the impeller normal to the blades (?1 = 0°) and exits at an angle of 35° from radial (?2 = 35°). The inlet radius is r1 = 12.0 cm, at which the blade width b1 = 18.0 cm. The outlet radius is r2 = 24.0 cm, at which the blade width b2 = 16.2 cm. The volume flow rate is 0.573 m3 /s. Assuming 100 percent efficiency, calculate the net head produced by this pump in cm of water column height. Also calculate the required brake horsepower in W
1) Interpret solar power in the context of environmental impact.2. What is the rigid dichotomy between windmill and diesel-driven pumps?3. For a normal windmill-driven pump at 3 m/s wind speed, the yield at a 10 m Head is typically 0.12 liters/s per m2 of rotor area, value windmills in the context of yield.
The net head delivered by a pump at a rotational speed of 1000 rpm is 10 m. If the rotational speed is doubled, the net head delivered will be (a) 5 m (b) 10 m (c) 20 m (d ) 40 m (e) 80 m
A centrifugal pump operating under steady flow conditions delivers 2,270 kg/min of water from an initial pressure of 82,740 Pa to a final pressure of 275,800 Pa. The diameter of the inlet pipe to the pump is 15.24 cm and the diameter of the discharge pipe is 10.16 cm. What is the work done? a. 458.1 kJ/min b. -458.1 kJ/min c. 438.4 kJ/min d. -438.4 kJ/min
PAY ATTENTION TO THE QUESTION : What is the resulting flow rate in the system if three pumps are used in parallel? (a) 0.483 m^3/s (b) 0.364 m^3/s (c) 0.333 m^3/s (d) 0.563 m^3/s 1. The Head -flowrate curve for a centrifugal pump is given by: HP = 28 -30Q2 Where, HP is in meter and Q is in m3/s . This pump is used to pump water for a system with the following (H-Q) curve: HS = 8 + 150Q2 Where, HS is in meter and Q is in m3/s . IT SAYS : if theee pumps are used in parallel PAY ATTENTION Multiple choice choose correct answer
When mechanical energy is illustrated by an ideal hydraulic turbine coupled with an ideal generator, explain it briefly?
Three pumps are connected in parallel. According to pump performance curves, the shutoff head of each pump is as follows: Pump 1: 7 m Pump 2: 10 m Pump 3: 15 m If the net head for this pump system is 9 m, which pump(s) should be shut off? (a) Pump 1 (b) Pump 2 (c) Pump 3 (d) Pumps 1 and 2 (e) Pumps 2 and 3
A reaction turbine works at 450rpm under a head of 120m.its diameter at inlet is 1.2m and the flow area is 0.4m^2.The angles made by absolute and relative velocities at inlet are 20°and 60° respectively with the tangential velocity. Determine i) the volume flow rate ii) the power developed iii) the hydraulic efficiency
To maximise power in Pelton turbine, the bucket speed must be (1) equal to the jet speed (2) equal to half of the jet speed (3) equal to twice the jet speed (4) independent of the jet speed
A centrifugal fan supplies 4.7m3/s of air at a total static pressure of 325Pa. If the fan efficiency is %06 and rotates at a speed of 950rpm and supplies air with a velocity of 12m/s, determine the fan total pressure, air power, and fan power?
A centrifugal pump pumps water at a flow rate of 7 m³/s to a height of 10 m. If the pump works at the best efficiency point, find the pump impeller diameter, pump speed, the best efficiency value of the pump, the head at the best efficiency value, and the specific speed of the pump, given that CQ=0.15 CH=6 CP=0.75.