A clay stratum 8.0 m thick is located at a depth of 6 m from the ground surface. The natural moisture content of the clay is 56% and G = 2.75 The soil stratum between the ground surface and the clay consists of fine sand. The water table is located at a depth of 2 m below the ground surface. The submerged unit weight of fine sand is 10.5 kN/m² and its moist unit weight above the water table is 18.68 kN/m? Calculate the effective stress at the center of the clay layer. 6 m -8 m- Sand Clay Figure Ex. 5.11 2 m 4 m 4 m

A clay stratum 8.0 m thick is located at a depth of 6 m from the ground surface. The natural moisture content of the clay is 56% and G = 2.75 The soil stratum between the ground surface and the clay consists of fine sand. The water table is located at a depth of 2 m below the ground surface. The submerged unit weight of fine sand is 10.5 kN/m² and its moist unit weight above the water table is 18.68 kN/m? Calculate the effective stress at the center of the clay layer. 6 m -8 m- Sand Clay Figure Ex. 5.11 2 m 4 m 4 m

Principles of Foundation Engineering (MindTap Course List)

9th Edition

ISBN:9781337705028

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter2: Geotechnical Properties Of Soil

Section: Chapter Questions

Problem 2.15P

See similar textbooks

Similar questions

A dense silt layer has the following properties: e=0.30, D10=10µm and capillary constant = 0.20cm2 Free ground water level is 8m below the ground surface. Determine the vertical effective stress (kPa) at 5m depth (point A). Assume unit weight of solids = 26.5 KN/m3 and that the soil above the capillary rise and ground surface is partially saturated at 50%.
a dense silt layer has the following properties: void ratio = 0.50, effective diameter d10 = 10 um, capillary constant c = 0.20 cm2. free ground water level is 8.0 m below the ground surface. find the vertical effective stress in kpa at 5m depth. assume unit weight of solids = 26.5 kn/m3 and that the soil = 26.5 kn/m3 and that the soil above the capillary action rise and ground surfaces is partially saturated at 50% from the problem above, find the vertical effective stress at 10m depth. assume unit weight of solids=26.5kN/m3 and that the solid above the capillary action rise and ground surface is partially saturated at 50%.
A dense silt layer has the following properties: void ratio e = 0.50, effective Diameter D10 = 10 μm, capillary constant C = 0.20 cm2. The free groundwater level is 8m below the ground surface. Assume unit weight of solids y= 26.50kN/m3. Find the vertical effective stress at 10m depth. Assume that the soil above the capillary zone is partially saturated at 50%.
A layer of soil profile consists of 3.6m upper layer of sand having a saturated unit weight of 18.88 kN/m3 and a lower clay layer 16m deep waith saturated unit weight of 17.31kN/m3. The clayayer has a void ratio of 1.27. The sand layer has a liquidity index of 64.5% and moisture content of 40%. Plastic limit is 20%. Water is located at the ground surface. A tank 12 m high is located at the ground and contains oil with density of 0.81. A. Determine the effective vertical stress at the mid height of clay layer. B. Determine the consolidation settlement of the clay layer. C. Determine the maximum depth that the cylinder be buried so that the settlement will be minimum.
A clay layer 3.66 m thick rests beneath a deposit of submerged sand of 7.92 m thick. The top of the sand is located 3.05 m below the surface of a lake. The saturated unit weight of the sand is 19.62 kN/m3 and of the clay is 18.36 kN/m3. Compute (a) the total pressure (b) the pore water pressure and (c) the effective pressure all at the mid height of the clay layer. Draw the figure
A dense silt has the following properties: Void ratio (e) = 0.40, SpecificGravity (Gs) = 2.70, Effective diameter d10 = 1x10^-6 m, Capillary constant (C) = 0.20 cm^2. Free ground water level is 8.0 m below the ground surface. a. Find the height of capillary rise in the silt. b. Find the vertical effective stress in kPa at 5m depth. Assume that the soil abovethe capillary zone or capillary action rise to be dry soil and the soil within thecapillary action be partially saturated (degree of saturation, S) at 50%. c. Find the vertical effective stress at 10m depth. Assume that the soil above thecapillary zone or capillary action rise to be dry soil and the soil within the capillaryaction be partially saturated (degree of saturation, S) at 50%.
A dense silt layer has the following properties: e =0.406 D10= 10.1 um Capillary constant = 0.209 sq.cm Free ground water level is 8m below the ground surface. 1.) Find the height of capillary rise in the siltin meters. 2) Find the vertical effective stress at 6m depth. Assume ys = 26.51 kn/m3 and the soil above capillary action rise and ground surface is partially saturated at 79%.
A layer of silt 3.5 m thick underlain by 3 m thick tay layer. The water table is located at 2.5 m below the ground surface. The capillary rise that layer is 1.5 m. Assuming that the sit and clay layer has the following parameters Sile layer: Depth 0-1 m:G-2.7, e-0.6: 5-0% Depth 1-3 G-27; -0.6 5-6 Depth 25-33 G-2.7; e-0.6: 5-100% Clay layer: G-2.69; -0.807; S-100% (Full (1) Calculate the total and effective stresses and pure water pressure at points A, B, C, D and Eat 0, 1,25,3.5 and 6.5 m respectively Auming no capillary rise. 145 Marks) (1) Repeat (1), this time with capillary rise of 15m 145 Marks) (i) Comment on the effect of capillary rise 12
A dense silt has the following properties: Void ratio (e) = 0.40, SpecificGravity (Gs) = 2.70, Effective diameter ??? = ????−??, Capillary constant (C) =?. ?? ???. Free groound water level is 8.0 m below the ground surface. a. Find the height of capillary rise in the silt.b. Find the vertical effective stress in kPa at 5m depth. Assume that the soil abovethe capillary zone or capillary action rise to be dry soil and the soil within thecapillary action be partially saturated (degree of saturation, S) at 50%.c. Find the vertical effective stress at 10m depth. Assume that the soil above thecapillary zone or capillary action rise to be dry soil and the soil within the capillaryaction be partially saturated (degree of saturation, S) at 50%
A layer of sand extends from group level at 9m and overlies a layer of clay of very Low permeability 6m. The water table is 6m below the surface of the sand the saturated unit weight of the sand is 19kn/m3.and that of the clay 20kn/m3.the unit weight of the sand above the ? table is 17kn/m3 .over a short period of time the water table lower by 3m. And expected to remain permanently at that Level. Determine the effective vertical stress at depth of 8 and 12m. Below the ground level.(a) immediately after the lowering of water table (b) several years after the lowering of the water table. Explain your answer for each step.
The profile at a site consists of 5m of sand overlying 10m of compressible clay, which in turn overlies a dense sand. The water table is at the top of the profile. The total unit weight of the top sand is 19kN/m3 and that of the clay is 18kN/m3. The Cv of the clay is estimated to be 5x 10-3 cm2/sec. Initially the clay is normally consolidated. It is planned to place a temporary fill that will exert a vertical load of 200kPa over the entire site. How long must the fill be in place so that, after it is removed, the maximum past pressure at every point in the clay is at least 50kPa larger than the vertical effective stress that existed before the fill was placed?
A 5.3 m thick of soil consist of three different layers as follows: Layer 1: H1 = 1.6 m, k1 = 4.5 m/day Layer 2: H2 = 2.3 m, k2 = 3.5 m/day Layer 3: H3 = 1.4 m, k3 = 5.1 m/day Considering the equivalent coefficient of permeability in the horizontal direction, what is the transmissivity of soil? CHOICES A. 28.43 m2/day B. 27.65 m2/day C. 20.45 m2/day D. 22.36 m2/day