A copper tube that experience a temperature change is placed between two rigid caps. Four steel bolts are symmetrically arranged parallel to the axis of the tube and are lightly fastened. The copper has a cross-sectional area, length, Young's modulus and coefficient of expansion of 2000 mm², 300 mm, 100 GPa and 16 x 10-6/°C respectively. The steel has a diameter, Young's modulus and coefficient of expansion of 22 mm, 200 GPa and 12 x 10-6/°C respectively. | Find the stress in the tube if the temperature of the assembly is raised by 70°C

A copper tube that experience a temperature change is placed between two rigid caps. Four steel bolts are symmetrically arranged parallel to the axis of the tube and are lightly fastened. The copper has a cross-sectional area, length, Young's modulus and coefficient of expansion of 2000 mm², 300 mm, 100 GPa and 16 x 10-6/°C respectively. The steel has a diameter, Young's modulus and coefficient of expansion of 22 mm, 200 GPa and 12 x 10-6/°C respectively. | Find the stress in the tube if the temperature of the assembly is raised by 70°C

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.5.1P: The rails of a railroad track are welded together at their ends (to form continuous rails and thus...

See similar textbooks

Similar questions

A wine of length L = 4 ft and diameter d = 0.125 in. is stretched by tensile forces P = 600 lb. The wire is made of a copper alloy having a stress-strain relationship that may be described mathematically by =18,0001+30000.03(=ksi) in which is nondimensional and has units of kips per square inch (ksi). (a) Construct a stress-strain diagram for the material. (bj Determine the elongation, of the wire due to the Forces P. (c) IF the forces are removed, what is the permanent set of the bar? (d) If the forces are applied again, what is the proportional limit?
The rails of a railroad track are welded together at their ends (to form continuous rails and thus eliminate the clacking sound of the wheels) when the temperature is 60°F. What compressive stress ?? =6.5×10-6 /? is produced in the rails when they are heated by the sun to 120"F if the coefficient of thermal expansion a = the modulus of elasticity E = 30 × 106 psi?
1.3 A furnace wall is to be constructed of brick having standard dimensions of Two kinds of material are available. One has a maximum usable temperature of 1040°C and a thermal conductivity of 1.7 W/(m K), and the other has a maximum temperature limit of 870°C and a thermal conductivity of 0.85 W/(m K). The bricks have the same cost and are laid in any manner, but we wish to design the most economical wall for a furnace with a temperature of 1040°C on the hot side and 200°C on the cold side. If the maximum amount of heat transfer permissible is 950 , determine the most economical arrangement using the available bricks.
A W 8 × 28 beam of a length 10 ft is held between immoveable supports. The beam has a modulus of elasticity E = 29,000 ksi and coefficient of thermal expansion a = 6.5 ×10-6 /?. If the temperature of the beam is raised uniformly by an amount AT = 20°F, calculate the thermal stress aTin the beam.
Rectangular bars of copper and aluminum are held by pins at their ends, as shown in the figure. Thin spacers provide a separation between the bars. The copper bars have cross-sectional dimensions 0.5 in. × 2.0 in., and the aluminum bar has dimensions 1.0 in. × 2.0 in. Determine the shear stress in the 7/16-in. diameter pins if the temperature is raised by 100°F. (For copper, Et= 18,000 ksi and ac = 9.5 × 10-6/?; for aluminum, Ea= 10,000 ksi and aa= 13 × 10-6/?.) Suggestion: Use the results of Example 2-10
question 2 temperature stresses A composite bar is comprised of a concentric circular rod of copper and a tube of aluminium, each of length 500 mm, that are attached rigidly to above one another at both ends. The diameter of the copper rod is 30 mm, while the inner and outer diameters of the aluminium rod are 50 and 60 mm, respectively. The Young’s modulus and coefficients of thermal expansion for copper and aluminium are given as, 120 GPa and 80 GPa, and17 × 10−6 oC and 23 × 10−6/ o?, respectively Please show all formulas and substitutions into formulas 1 Calculate the magnitude of the stresses that are induced in the copper bar and aluminium rod if the composite bar is exposed to a temperature change of 500 oC, and state their senses. 2 Calculate the elongations of the constituents of the composite bar.
A copper tube having a cross-sectional area of 2 000 mm2 and a length of 300mm is placed between two rigid caps. Four 22-mm-diameter steel bolts aresymmetrically arranged parallel to the axis of the tube and are lightly fastened.Find the stress in the tube if the temperature of the assembly is raisedby 70 °C. What load will each bolt carry at the raised temperature? (Let EST =200 GPa; Ecu = 100 GPa; aST = 12 x 10"6/oC; ac u = 16 x 10-6/°C.)
Kindly show a step-by-step solution. Thank you A 6m rod with a 4mm gap between one of its ends and the surface of the wall next to it is secured solidly between two walls at 25°C. Calculate the highest temperature that the rod can withstand in degrees celsius while taking into account the maximum limiting stress of 67 MPa, where a = 19.5 m/mC°, and E = 130 GPa.
1.A composite component is comprised of a tube and a concentric rod running inside it, both with a length of 1.5 meters. The tube is made of copper and has inner and outer diameters of 60 mm and 100 mm, respectively, a coefficient of thermal expansion and elastic modulus of 17 ×10−6? and 117 GPa, respectively. The rod is made of aluminium with a diameter, coefficient of thermal expansion and elastic modulus of 50 mm, 23 ×10−6? and 80 GPa, respectively. If the composite is exposed to a temperature rise of 120°C, determine:1.1 The sense and magnitude of the stresses induced in the composite if it is not restrained. 1.2 The sense and magnitude of the stresses induced in the composite if it is partially restrainedwith an allowed free expansion of 0.3 mm.
A 23 mm diameter bronze bar 2.8 m long is placed between two rigid walls. At a temperature of -3°C, the gap Δ = 4.6 mm. Find the temperature(at degree-Celsius) at which the compressive stress in the bar will be 34 MPa. Use α = 18.09 × 10-6 m/(m·°C) and E = 82 GPa. Answer in two decimal places. Numerical values only. Don't indicate units here, just on the submitted solution.
A steel rod, 12 mm in diameter, passes centrally through a copper tube 2.5 m long and having 36 mm and 48 mm as internal and external diameters respectively. The tube is closed at each end by 24 mm thick steel plates which are secured by nuts. The nuts are tightened until the copper tube is reduced in length by 0.50. The whole assembly is then raised in temperature by 60 degrees Celsius. Steel: Coefficient of expansion = 1.2x10^-5/degrees Celsius, Es = 200 GPa Copper: Coefficient of expansion = 1.75x10^-5/degrees Celsius, Ec = 100 GPa Calculate the stress in copper and stress in steel after the rise of temperature if the thickness of the plates remains unchanged. Indicate if the answer is tensile, tension, compression.
A steel rod, 12 mm in diameter, passes centrally through a copper tube 2.5 m long and having 36 mm and 48 mm as internal and external diameters respectively. The tube is closed at each end by 24 mm thick steel plates which are secured by nuts. The nuts are tightened until the copper tube is reduced in length by 0.50. The whole assembly is then raised in temperature by 60 degrees Celsius. Steel: Coefficient of expansion = 1.2x10^-5/degrees Celsius, Es = 200 GPa Copper: Coefficient of expansion = 1.75x10^-5/degrees Celsius, Ec = 100 GPa Calculate the stress in copper before the rise of temperature if the thickness of the plates remains unchanged. Indicate if the answer is tensile, tension or compression