A copper wire has a cross sectional area A1 = 10-6 m² and has a density of charge carriers of 1029 electrons/m3. Asshown in the figure, the copper wire is attached to an equal length of aluminum wire with a cross sectional area A2 = 8x 10-8 m2 , and density of charge carriers of 5 x 1028 electrons/m³. A current of 10 A flows through the copper wire.Approximate resistivities of copper and aluminum are pcu = 2 x 10-82.m and paj = 3 x 10-8 2.m respectively.Copper wireAluminum wireWhat is the current flowing through the Aluminum wire ?What is the ratio of the drift velocities in the two wires vcu / VA?What is the ratio of the resistances of the two wires Rcy/RA ?

The data for copper is: A1=10-6m2,n=1029electrons/m3,I=10A,ρcu=2×10-8Ω.m The data for aluminum is:…

A copper wire has a cross sectional area shown in the figure, the copper wire is attached to an equal length of aluminum wire with a cross sectional area A2 - 8 x 10-8 m2, and density of charge carriers of 5 x 1028 electrons/m. A current of 10 A flows through the copper wire. m² and has a density of charge carriers of electrons/m. As Approximate resistivities of copper and aluminum are pcu 2x 10-8 2.mand PAI = 3 x 10-82.m respectively. Copper wire Aluminum wire What is the current flowing through the Aluminum wire? What is the ratio of the drift velocities in the two wires vou/Va? What is the ratio of the resistances of the two wires Rou/RA?

A copper wire has a cross sectional area shown in the figure, the copper wire is attached to an equal length of aluminum wire with a cross sectional area A2 - 8 x 10-8 m2, and density of charge carriers of 5 x 1028 electrons/m. A current of 10 A flows through the copper wire. m² and has a density of charge carriers of electrons/m. As Approximate resistivities of copper and aluminum are pcu 2x 10-8 2.mand PAI = 3 x 10-82.m respectively. Copper wire Aluminum wire What is the current flowing through the Aluminum wire? What is the ratio of the drift velocities in the two wires vou/Va? What is the ratio of the resistances of the two wires Rou/RA?

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.2P: The temperature dependence of resistance is also quantified by the relation R2=R1[ 1+(T2T1) ] where...

See similar textbooks

Similar questions

The wires of our appliances are insulated with a material mixed with rubber, which has a very high resistivity. If a certain wire has a length of 2.5 m and the outer diameter is 5mm and its inner diameter is 0.5mm, what is its resistance? Note that the inner diameter is present to leave a hallow place where conducting wire ( usually copper) is present. Follow the format: Given: Required: Equation: Solution: Answer:
A copper wire 100 m long must experience avoltage drop of less than 1.5 V when a current of 2.5 A passesthrough it. Given that copper has an electrical conductivity of6.0E7 /(Ὠ-m), compute the minimum diameter of the wire.
A semiconductor substrate of 1 mm2 cross section is used to design a resistor. The doped-p concentration is 5'10^16 at/cm^3. and μp=500cm^2/Vxs We ask:(a) Calculate the electrical resistance for dimensions a= 100 mm, l= 500 mm, e= 0.1 mm.(b) The current density circulating for a voltage of 5 V.(c) The dopant concentration for R= 100 W.
Q1 For the figure shown below answer allthe following 1. Justtell without the details , how muuch work does t take to move a charge a long an equipotential ine from point ato point b ? S 3y fthe potentials are 50v, 15v, 30v. How much Va, VA, VI? And Why? 1£Va = 90v How much Vb2 And why? And how much the potential difference Vcd on the first equipotential line? FH 4.
A copper wire has a diameter of 2.05 mm and carries a current of 15 A due solely toelectrons. (These values are common in residential wiring.) Each electron has a charge of -1.60 x 10-19 C. Assume that the free-electron (these are the electrons capable of movingthrough the copper) concentration in copper is 1029 electrons/m³. Find the average velocity ofthe electrons in the wire.
If a cell has an E.M.F of E volts, an internal resistance of r ohms and supplies A current I ampere to a load, the terminal p.d. V volts is given by....
Find the total current flowing (in ampere) in a cylindrical conductor (solid wire) 1 meter long and a diameter of 1mm. Given also that its charge density (De) is 1029 carriers/m3 and its carrier velocity (u) is 19.9x10-6 m/s.
A coil of Nichrome wire is 23.0 m long. The wire has a diameter of 0.400 mm and is at 20.0°C. (a) If it carries a current of 0.600 A, what is the magnitude of the electric field in the wire?(b) If it carries a current of 0.600 A, what is the power delivered to it?(c) If the temperature is increased to 300°C and the potential difference across the wire remains constant, what is the power delivered? A coil of Nichrome wire is 23.0 m long. The wire has a diameter of 0.400 mm and is at 20.0°C. Your response is within 10% of the correct value. This may be due to roundoff error, or you could have a mistake in your calculation. Carry out all intermediate results to at least four-digit accuracy to minimize roundoff error.
A string of 8 suspension insulators is to be fitted with a grading ring. If the pin to earth capacitances are all equal to C, find the values of line to pin capacitances that would give a uniform voltage distribution over the string.
Calculate the linear charge density (nC/m) when the inner diameter of the pipe is 19mm and the wire diameter is 138 μm. a voltage of 866 V is connected between the wire and the pipe.
Make a comparative chart related to electrical conduction in materials, that is, comparing metals (and other conductors) / semiconductors / superconductors / insulators. Additional, on another page, an application of each of them
A coil of aluminum wire has a resistance of 50Ω when its temperature is 0°C. Determine its resistance, in ohms, at 100°C if the temperature coefficient of resistance of aluminum at 0°C is 0.0038/°C.