A course sand sample is placed in the constant permeameter test. Water passes through the sample water with a constant head of 40cm and after 0.00167hr, 40grams of water have been collected. What is the coefficient of permeability of the sand in cm/sec if the sample is placed inside a 166cm container with a 7.89cm radius?

A course sand sample is placed in the constant permeameter test. Water passes through the sample water with a constant head of 40cm and after 0.00167hr, 40grams of water have been collected. What is the coefficient of permeability of the sand in cm/sec if the sample is placed inside a 166cm container with a 7.89cm radius?

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter9: In Situ Stresses

Section: Chapter Questions

Problem 9.11P

See similar textbooks

Similar questions

A constant head permeability test was carried out on a cylindrical sample of sand 10 cm diameter and 15 cm height. 160 cm³ of water was collected in 31.75 sec under a head of 30 cm. 1. Compute the coefficient of permeability in cm/s. 2. Compute the velocity of flow in m/s.
Water flows at the rate of 0.09 ml/s in an upward direction through a sand sample with a coefficient of permeability of 2.7 × 10^–2 mm/s. The thickness of the sample is 120mm and the area of cross-section is 5400 mm2. Taking the saturated unit weight of the sand as 18.9 kN/m3, determine the effective pressure in Pa at the middle of the sample. a. 364 b. 910 c. 182 d. 728
During a constant head permeability test on a sand sample, 260 x 10^3 mm^3 of water were collected in 2 minutes. If the sample had a length of 100 mm, a diameter of 40 mm and a maintained head of 200 mm. What is the coefficient of permeability in mm/s?
Water flows at the rate of 0.09 ml/s in an upward direction through a sand sample with a coefficient of permeability of 2.7 × 10^–2 mm/s. The thickness of the sample is 120 mm and the area of cross-section is 5400 mm2. Taking the saturated unit weight of the sand as 18.9 kN/m3, determine the effective pressure in Pa at the bottom of the sample. a. 364 b. 728 c. 182 d. 910
For a falling head laboratory test, the following are the given values:• Length of soil specimen = 210.00 mm• Initial head = 523.00 mm• Final head = 297.00 mm• Duration of test = 3.50 mins• Area of standpipe = 42.0 sq.mm• Area of specimen = 1050.00 sq.mmA. Compute for the hydraulic conductivity of the soil in cm/sec.B. Determine the seepage velocity if n=0.35C. Determine the head difference at t = 120 sec
pls ans soon as posssible During a constant head permeability test on a sand sample, 260ml of water was collected in 2 min. If the sample had a length of 100 mm, a diameter of 40 mm and a maintained head of 200 mm, what is the coefficient of permeability?
A constant-head permeability test is performed where the hydraulic gradient is 0.75. The crosssectional area of the sample is 0.25 ft2. The quantity of water flowing through the sample is measured to be 0.004 ft3/minute. (a) What is the coefficient of permeability in feet per minute? (b) What is the coefficient of permeability in millimeters per second?
35 The data from a falling head test is shown. Diameter of standpipe: 6 cm. Initial Head: 90.97 cm. Duration of test: 17 min. Length of soil sample: 30.68 cm. Diameter of permeameter: 40 cm. If the soil permeability is 0.0089 cm/min, determine the final head (in cm.) of the permeability test. Round off to two decimal places.
A glass container with pervious bottom containing fine sand in loose state (void ratio = 0.8) is subjected to hydrostatic pressure from underneath until quick condition occurs in the sand. If the specific gravity of sand particles = 2.65, area of cross-section of sand sample= 10 cm2 and height of sample = 10 cm, compute the head of water in cm required to cause quicksand condition. a.9.17 b.0.45 c.7.29 d.0.9
16. For a constant laboratory permeability test on a fine sand, the following data are given: Length of specimen: 16 cm. Diameter of specimen: 97 mm. Constant head difference: 51 cm. Volume of water collected in 5.96 min.: 422 cc Void ratio of the soil specimen: 0.58 Determine the seepage velocity in m/min. Round off to four decimal places.
The data from a falling head test is shown. Diameter of standpipe: 5 cm. Initial Head: 92.68 cm. Duration of test: 19 min. Length of soil sample: 30.64 cm. Diameter of permeameter: 43 cm. If the soil permeability is 0.008 cm/min, determine the final head (in cm.) of the permeability test. Answer: 64.22
The data from a falling-head test on a silty clay are: Cross-sectional area of soil: 80 cm^2; Length of soil: 10 cm ;Initial head: 90 cm ; Final head : 84 cm ; Duration of test : 15 minutes ; Diameter of tube : 6 mm ; Temperature : 22C .Determine k a. 3.47 x 10^-2 b. 2.6 x 10^-6 c. 5.0 x 10^-2 d. 6.7 x 10^-1