A cylinder of cross-sectional area 2500 mm is filled with sand of permeability 5.0 mm/s. Water is caused to flow through sand under a constant head using the arrangement shown in Fig. 2.33. Determine the quantity of water discharged in 10min. Answer 9x 10 mm Overflow 250 mm Discharge 150 mm 100 mm 200 mm T20 mm

A cylinder of cross-sectional area 2500 mm is filled with sand of permeability 5.0 mm/s. Water is caused to flow through sand under a constant head using the arrangement shown in Fig. 2.33. Determine the quantity of water discharged in 10min. Answer 9x 10 mm Overflow 250 mm Discharge 150 mm 100 mm 200 mm T20 mm

Principles of Foundation Engineering (MindTap Course List)

8th Edition

ISBN:9781305081550

Author:Braja M. Das

Publisher:Braja M. Das

Chapter14: Sheet-pile Walls

Section: Chapter Questions

Problem 14.9P

See similar textbooks

Similar questions

Water flows in a wide channel at Fr=4.5 and y1 = 2.40 m. If the flow undergoes a hydraulic jump, calculate: y2
17. Using horizontal direction in cm/day 18. if the hydraulic gradually for the soil formation is 0.75 19 aquifer in cubic meters per day pls ans:
(Question: 4: A well with a storage coefficient of 0.05 m/s has a slope define by rise = 3 and run = 4. Find the velocity of flow using Darcy’s equation.)The soil porosity in the area where the 46-cm diameter well in Question#4 is 48%, find the discharge of the groundwater.
An underground conical tank, standing on its vertex, is being filled with water at the rate of 18pi ft3/min. If the tanks has a height of 30feet and a radius of 15feet, how fast is the water level rising when the water is 12 feet deep? a. 3/4 ft/min b. 1/4 ft/min c. 1/2 ft/min d. 1/3 ft/min
A cylindrical vessel with a height of 4.3m and diameter 2.9m has an orifice located at the bottom surface. If the water level in the vessel is to be emptied from a 3.6m depth, how long did it take for the vessel to be empty (in min)? Assume the orifice to have a diameter of 55mm and c = 0.62.
27. A rectangular canal 2.24 m wide and 1.12 m deep has a full capacity of 8 m3/s. Assuming n = 0.0152 what is the slop of the channel bed?0.005090.000810.002830.00182
A water tank is in the shape of frustum of a cone with height 6 m. and upper and lower radii 4 m. and 2 m., respectively. If water pours into the tank at a rate of 20 m3/min, how fast is the water level rising when the water is 3m from the top? a. 1.698 cm/s b. 1.019 cm/s c. 1.179 cm/s d. 0.707 cm/s
Figure shows that the pipe flow of 50 m^3/hr, is driven by pressurized air in the tank. Determine the head loss in the "smooth" pipe in meters if its friction factor is 0.014 *12.9517*99.9358*30.4889*39.5136 What gage pressure p1 in kPa, is needed to provide the given flow rate? *1121 kPa*1692 kPa*1328 kPa*1725 kPa
If the coefficient of permeability for the soil is estimated to be k 1⁄4 0.05 cm/s, what is the average or discharge (Darcy) velocity of flow through the soil (the soil is located between points B and D) in cm/s? Use the format 2.222 x 10^(-4)
Given the discharge Q in Question#5, transmissibility T in Question#6, slope S in Question#4; find the aquifer width X. Question 4: A well with a storage coefficient of 0.05 m/s has a slope define by rise = 3 and run = 4. Find the velocity of flow using Darcy’s equation. Question 5: The soil porosity in the area where the 46-cm diameter well in Question#4 is 48%, find the discharge of the groundwater. Question 6: Given the coefficient k in Question#4 and porosity p in Question#5, find the transmissibility (T) in m/s per unit m, if the aquifer width is 1.2 m.
A course sand sample is placed in the constant permeameter test. Water passes through the sample water with a constant head of 40cm and after 0.00167hr, 40grams of water have been collected. What is the coefficient of permeability of the sand in cm/sec if the sample is placed inside a 166cm container with a 7cm by 5cm dimension.
Water flows in a 3.0-m wide rectangular channel at Q = 20 m3/s and d1 = 1.5 m. If the flowundergoes a hydraulic jump, calculate:a) depth after the jump, d2;b) velocity before and after the jump;c) Froude number after the jump Fr2;d) head loss, hL and percent dissipation of energy.