a cylinder that is 500 mm in diameter and 2.0 m long has a specific weight of 535 N/m3 . It is held down into position with a cable attached to the sea floor. At this location, the sea is 500 m deep and the cylinder is to held in a fully submerged position just 3 m above the sea floor. FInd the resulting tension in the cable.

a cylinder that is 500 mm in diameter and 2.0 m long has a specific weight of 535 N/m3 . It is held down into position with a cable attached to the sea floor. At this location, the sea is 500 m deep and the cylinder is to held in a fully submerged position just 3 m above the sea floor. FInd the resulting tension in the cable.

Name: a cylinder that is 500 mm in diameter and 2.0 m long has a specific we
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: a cylinder that is 500 mm in diameter and 2.0 m long has a specific weight of 535 N/m3 . It is held down into position with a cable attached to the sea floor. At this location, the sea is 500 m deep and the cylinder is to held in a fully submerged po

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.90P: The hemispherical glass bowl is filled with water. Find the location y of the center of gravity of...

See similar textbooks

Similar questions

Calculate the resultant force caused by the water acting on the parabolic arch dam. The water levels are 16 ft on the upstream side and zero on the downstream side. For water, use =62.4lb/ft3.
The hemispherical glass bowl is filled with water. Find the location y of the center of gravity of the filled bowl. Approximate the bowl as a thin shell of radius R=6.15in. Use 1=162lb/ft3 for glass and 2=62.4lb/ft3 for water.
The thin-walled cylindrical can with a spherical dimple weighs 0.2 lb. Determine the force P required to push the can into water to a depth of 8 in. Use =0.036lb/in.3 for water.
Evaluate the dimensionless groups hcD/k,UD/, and cp/k for water, n-butyl alcohol, mercury, hydrogen, air, and saturated steam at a temperature of 100C. Let D=1m,U=1m/sec, and hc=1W/m2K.
A force sensor is immersed in a iquid with a density of 61 lb/ to a depth of 42 in and then placed in a second liquid with a density of 732 N/. What is the change in force on the sender if the diameter of the sensor is 8 cm and the change in depth is 5.9 cm?
A plate has the shape of a circle with radius 5 m. The plate is submerged vertically in water so that thebottom of the plate is 15 m below the surface of the water. Find the hydrostatic force exerted on the platedue to the hydrostatic pressure of the water.
A door in the side of a tank is 3.1 m wide and 5.2 m high, the tank is filled to the top of the door with water of density 1000kg/m3. What is the force on the door in N?
A cubical buoy (2 m each side) weighs 687N and is anchored to the sea floor with a cable. The buoy normally floats on the surface. At certain times the water depth increases so that the buoy is completely immersed as shown in the figure. For this condition, what is the tension of the cable?
A metal block 2 ft square and 10 in. deep is floated on a body of liquid which consists of an 8-in layer of water above a layer of mercury. The block weighs 120 lb/ft3. What is the position of the bottom of the block? If a downward vertical force of 500 lb is applied to the center of this block, what is the new position of the bottom of the block ?
Find a) the total force on gate AB in KN and b) the position of the center of pressure in m with respect to the bottom of the pond. Assume that the gate is 8 feet wide, that 1ft = 0.3048m, and that 1PSI = 6897.1 Pa
Problem 3.- Blaise Pascal doubled Torricelli's barometer using Red wine, with a density of 984kg / m3 . (a) What was the height h of the wine column for normal atmospheric pressure? (b) Would you expect the emptiness on the column ti be as good as for mercury? Explain and argue.
A circular plate of radius 2ft is lowered to a liquid (w=1000 lb/ft^3) so that its center is 4 ft below the surface. Find the force on the lower half of the plate.