A cylindrical buoy 0.60 m in diameter and 1.80m high weighs 205kg. It is moored in salt water to a 12m length of chain weighing 12 kg/m of length. At high tide the height of the buoy protruding above water is 0.84m. What could be the height pf protrusion of the buoy if the tide dropped 2.10m? Specific weight of the steel chain is 7,790 kg/m^3.

A cylindrical buoy 0.60 m in diameter and 1.80m high weighs 205kg. It is moored in salt water to a 12m length of chain weighing 12 kg/m of length. At high tide the height of the buoy protruding above water is 0.84m. What could be the height pf protrusion of the buoy if the tide dropped 2.10m? Specific weight of the steel chain is 7,790 kg/m^3.

Name: A cylindrical buoy 0.60 m in diameter and 1.80m highweighs 205kg. It
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A cylindrical buoy 0.60 m in diameter and 1.80m highweighs 205kg. It is moored in salt water to a 12mlength of chain weighing 12 kg/m of length. At hightide the height of the buoy protruding above water is0.84m. What could be the height pf protrusio

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Evaluate the stability of the 3 m wide x 5 m deep (into the page) x 2 m tall block with a SG of 0.5 shown below in water by determining the displaced depth and the height of the metacenter.
the timber shown is 30cm square and has a specific gravity of 0.50. A man weighing 70kg standing at a point 60cm from one end causes that end to be just submerged. How long is the timber? Answer: L=5m
Gate AB in Fig. is 15 ft long and 8 ft wide into thepaper and is hinged at B with a stop at A . The water is at20 ° C. The gate is 1-in-thick steel, SG = 7.85. Compute thewater level h for which the gate will start to fall.
A concrete anchor (sp. gr.= 2.4) weighing 670 N is tied to the end of along timber which measures 20 cm x 20 cm x 6 m. The anchor does not reach the bottom of the water but submerged 5 m of the timber. What is the specific gravity of the timber?
A ship of displacement 36000 tonne carries oil fuel in four tanks 16.0 m long and 6.0 m broad, the tanks arranged with their length in the fore and aft direction. The specific gravity of the oil is 0.84, and the density of seawater inwhich the ship is floating is 1020 kgm-3. For a ship of this size, the metacentric height is at least 500 mm. What is the reduction of the metacentric height of the ship because of the oil that is contained in the tanks and how serious is this reduction? Please discuss further your conclusions.
The concrete graviy" dam is heid in place by its awn weight (Egute.1) The density of concrote is pc=2.5Mg/m2 and water has a density of ρw=1.0Mg/m3. Suppose that a=1⋅m ,h=8 m Figure Part A Determinn the setillest dimension d that will prevent the dam hom overturning about is end A. Express your answer to three significant figures and include the appropriate units: d=_______
Figure AB Cover rests on a flat surface. Cover 180 kg weight and 1.2 m wide. At what height is the water depth the lid won't open? find it. (glycerin density is 1260 kg/m3 , That density 1000 kg/m3 )
A triangular wooden body (S=0.80) is placed in water in theposition indicated in the figure. If the width of the body is 7.0 m,determine if the same for this position is stable or not indicating themetacentric height (YM).
A cylinder weighing 445 N and having a diameter of 1 m floats in salt water (sp.gr. 1.03) vertically. It has an anchor tied to the cylinder, where the anchor rest at the bottom of the earth. The anchor weigh 23540 N/m3 and has a volume of 0.280 m3. What height “h” above the water surface will be required to lift the anchor off the bottom of the water when a high tide occur? The part of the cylinder is submerged 0.30 m below the salt water.
16. A semi-circular plate whose radius is 3.6 m and its bottom diameter is 5.6 m from the water surface. What it’s the hydrostatic force acting on the plate?685.3 kN758.9 kN704.5 kN813.2 kN
A dam with triangular cross section holds back a body of water. The dam has height h. The dam is made of concrete, which has speci…c gravity 3.1. What is the maximum angle, , for which thedam will not tip over about point O?
A vertical cylinder gasoline storage tank is 30m in diameter and is filled to a depth of 15m with gasoline of mass density 740 kg/m³. if the shell plating has an allowable stress of 100 MPa, calculate the required wall thickness at the bottom of the tank.