A cylindrical tank with hemispherical heads is constructed of steel sections that are welded circumferentially (see figure). The tank diameter is 1.0 m, the wall thickness is 30 mm, and the internal pressure is 6 MPa. Determine the maximum shear stress in the head of the tank. Welded seams Lütfen birini seçin: a. None b. 51.56 MPa c. 25.00 MPa d. 48.75 MPa e. 62.50 MPa

A cylindrical tank with hemispherical heads is constructed of steel sections that are welded circumferentially (see figure). The tank diameter is 1.0 m, the wall thickness is 30 mm, and the internal pressure is 6 MPa. Determine the maximum shear stress in the head of the tank. Welded seams Lütfen birini seçin: a. None b. 51.56 MPa c. 25.00 MPa d. 48.75 MPa e. 62.50 MPa

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.3.11P: A standpipe in a water-supply system (see figure) is 12 ft in diameter and 6 in. thick. Two...

See similar textbooks

Similar questions

A standpipe in a water-supply system (see figure) is 12 ft in diameter and 6 in. thick. Two horizontal pipes carry water out of the standpipe; each is 2 ft in diameter and 1 in. thick. When the system is shut down and water fills the pipes but is not moving, the hoop stress at the bottom of the standpipe is 130 psi, (a) What is the height h of the water in the standpipe? (b) If the bottoms of the pipes are at the same elevation as the bottom of the stand pipe. what is the hoop stress in the pipes?
A wood-stave pipe is bound by steel rods which take the untire bursting stress. Find the proper spacing for 8-mm diameter steel rod for a 1.80-m diameter wood stave pipe if the working stress is 60 mpa for a head of water of 20m.
A steel pipe having a diameter of 15 cm and a wall thickness of 9.50 mm has an allowable stress of 140,000 kPa. What is the maximum allowable internal pressure in the pipe?
A 1.5-m-diameter cylindrical tank is formed of 6-mm-thick sheet steel (E = 200 Gpa, ν = 0.3). The maximum shear strain occurring in this tank when the contents pressure is 1 MPa, is:
A wood stave pipe, 120 cm in inside diameter, is to resist a maximum water pressure of 1,200 kPa. If the staves are bound by steel flatbands (10 cm by 2.50 cm), find the spacing of the bands if its allowable stress is 105 MPa
With pressure steel tank axis α = 750manufactured as degree angle helical weldedreferences Tank radius r = 0.80 m. wall thickness is 15 mm The internal pressure of the Tank is p = 2.8 kPa. Elasticity modulus of steel used in manufacturing e = 200 GPa and position repair ν = 0.3 stop For the cylindrical part of the tank; a-) Find circular and longitudinal stresses. b-) Find the largest in-plane and out-plane shear stresses. c-)Find a circular and longitudinal shape change. d-)Find normal and shear stresses formed in the welding seam. These stressesshow on the properly rotated element.
The gas tank consists of a cylindrical section with two hemispherical endcaps. The cylinder has a diameter of 75 cm and a wall thickness of 2 cm. If the allowable circumferential stress is 150 MPa and longitudinal stress is 100 MPa, find the maximum allowable internal pressure in the tank. Answer: P = ___________________
Problem :Pressure vessel made of alloy steel with Yield Strength of 250 MPa, Pressure acting on Pressure Vessel = 10 Atmosphere. Longitudinal Stress (σL) = 200 MPa. Hoop Stress (σθ) = 150 MPa. Radial Stress (σR) = -50. Question :a) How thick is the pressure vessel if the Inner Diameter is D = 2 Meters? b) Check whether the pressure vessel is safe or not? c) Calculate the maximum shear stress with Mohr's circle? d) Check whether the pressure vessel is safe or not with Tresca yield criterion and compare it with von Mises yield criterion?
The tank shown in the figure is fabricated from 10 mm steel plate. determine the maximum longitudinal and circumferential stress caused by an internal pressure of 1.2 mpa
Determine the maximum pressure that a cylindrical gas reservoir canwithstand, using the three flow criteria. Use the following information:Material: AISI 304 stainless steel --- hot finished and annealed, σ0 = 205 MPaThickness: 25 mmDiameter: 500 mmLength: 1 mmHint: Determine the longitudinal and circumferential (hoop) stresses by themethod of sections.
A continous wood stave pipe is 3.0 m in diameter and is in service under a head of 30.0 m of water. The staves are secured by means of round 25 mm steel hoops with allowable stress of 105 MPa. Find the masimum spacing in cm of the hoops to safely secure the pipe. Assume that there is an initial tension of 7000 N applied to the hoops.
The propeller shaft of a large ship has anoutside diameter 18 in. and inside diameter 12 in., asshown in the figure. The shaft is rated for a maximumshear stress of 4500 psi.(a) If the shaft is turning at 100 rpm, what is themaximum horsepower that can be transmittedwithout exceeding the allowable stress?(b) If the rotational speed of the shaft is doubledbut the power requirements remain unchanged,what happens to the shear stress in the shaft?