Question 1A drum of radius r, = 4 in. is mounted on a cylinder of radius r2 = 6 in. A cord is wound around the drum, and itsextremity D is pulled to the left with a constant velocity of 6 in./s, causing the cylinder to roll without sliding. Determine:Not yetansweredMarked out of1. The angular velocity of the cylinder.15.002.The velocity of the center of the cylinder A.P Flagquestionrijn.r2 in.B.Select one:O A. w = 4 rad/s: and VA = 16 in/s.O B. w = 5 rad/s; and VA = 25 in/s.OCw= 2 rad/s; and Va = 6 in/s.OD.w = 3 rad/s: and VA= 12 in/s.9:07 PMENS SkypeOMENG300 Midter.4/17/2021

Given:r1=4 inr2=6 inSince it is the case of pure rolling, the instantaneous center is at C.Velocity…

A drum of radius r, = 4 in. is mounted on a cylinder of radius r, = 6 in. A cord is wound around the drum, and its extremity D is pulled to the left with a constant velocity of 6 in./s. causing the cylinder to roll without sliding. Determine: 1. The angular velocity of the cylinder. %3! 2. The velocity of the center of the cylinder A. Tin. A T2 in. D

A drum of radius r, = 4 in. is mounted on a cylinder of radius r, = 6 in. A cord is wound around the drum, and its extremity D is pulled to the left with a constant velocity of 6 in./s. causing the cylinder to roll without sliding. Determine: 1. The angular velocity of the cylinder. %3! 2. The velocity of the center of the cylinder A. Tin. A T2 in. D

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The mechanism shown is composed of rod GPV pin-connected to rod DPE at point P. Knowing that the velocity of V is 4 m/s downwards, A. [20%] Redraw bar GPV and determine its instantaneous center of rotation (label it as point C). Specify all angles and distances needed. B. [15%] Determine the angular velocity of rod GPV. C. [30%] Determine the velocity of point P. D. [20%] Redraw bar DPE and determine its instantaneous center of rotation (label it as point C). Specify all angles and distances needed. E. [15%] Determine the angular velocity of rod DPE. NOTE: Use INSTANTANEOUS CENTER METHOD for Velocity Analysis
A drum of radius r1 = 3 in. is mounted on a cylinder of radius r2 = 6 in. A cord is wound around the drum, and its extremity D is pulled to the left with a constant velocity of 6 in./s, causing the cylinder to roll without sliding. Determine: 1. The angular velocity of the cylinder. 2. The velocity of the center of the cylinder A. Select one: A. ω=6 rad/s; and VA = 30 in/s. B. ω=4 rad/s; and VA = 16 in/s. C. ω=5 rad/s; and VA = 25 in/s. D. ω=2 rad/s; and VA = 6 in/s.
The mechanism shown is composed of rod GPV pin-connected to rod DPE at point P. Knowing that the velocity of V is 4 m/s downwards, A. Redraw bar GPV and determine its instantaneous center of rotation (label it as point C). Specify all angles and distances needed. B. Determine the angular velocity of rod GPV. C. Determine the velocity of point P. D. Redraw bar DPE and determine its instantaneous center of rotation (label it as point C). Specify all angles and distances needed. E. Determine the angular velocity of rod DPE. Use IC method. Please don't show me the answer in chegg. I think there is an error
The outer gear A rotates with an angular velocity of 6 rad/s counterclockwise. Knowing that the angular velocity of the intermediate gear B is 3 rad/s clockwise, determine: 1. The angular velocity of the arm ABC 2. The angular velocity of the outer gear C. Select one: A. ωarm=3 ω a r m = 3 rad/s (CW); and ωC=1.5 ω C = 1.5 rad/s (CW) B. ωarm=5 ω a r m = 5 rad/s (CW); and ωC=3 ω C = 3 rad/s (CW) C. ωarm=0 ω a r m = 0 rad/s ; and ωC=1.5 ω C = 1.5 rad/s (CCW) D. ωarm=1 ω a r m = 1 rad/s (CW); and ωC=0 ω C = 0 rad/s
The outer gear A rotates with an angular velocity of 6 rad/s counterclockwise. Knowing that the angular velocity of the intermediate gear B is 3 rad/s clockwise, determine: 1. The angular velocity of the arm ABC 2. The angular velocity of the outer gear C. 5 in. 10 in. C B -15 in.- -15 in.- Select one: O A. arm = 3 rad/s (CW); and @c = 1.5 rad/s (CW) O B. Warm = 5 rad/s (CW); and @c = 3 rad/s (CW) O C.o arm = 0 rad/s ; and @c = 1.5 rad/s (CCW) O D. warm = 1 rad/s (CW); and wc = 0 rad/s
Problem 1: In a four bar mechanism, the dimensions of the links are as given below: AB = 50 mm, BC = 66 mm CD = 56 mm and AD = 100 mm At a given instant when |DAB 60o the angular velocity of link AB is 10.5 r/s in CCW direction. Determine, i) Velocity of point C ii) Velocity of point E on link BC when BE = 40 mm iii) The angular velocity of link BC and CD iv) The velocity of an offset point F on link BC, if BF = 45 mm, CF = 30 mm and BCF is read clockwise. v) The velocity of an offset point G on link CD, if CG = 24 mm, DG = 44 mm and DCG is read clockwise. vi) The velocity of rubbing of pins A, B, C and D. The ratio of the pins are 30 mm, 40 mm, 25 mm and 35 mm respectively.
15.77 In the position shown, the crank AB of a slider-crank mechanism rotates with wAB= 4 rad/s clockwise and aAB= 10 rad/s2 counterclockwise. For this position, determine aBD of the connecting rod BD and aD of the slider D.
Knowing that at the instant shown the angular velocity of bar AB is 15 rad/s clockwise and the angular velocity of bar EF is 10 rad/s clockwise, determine (a) the angular velocity of rod DE, (b) the relative velocity of collar B with respect to rod DE.
In a four-link mechanism, the dimensions of the links are given as AB=50mm, BC=66mm, CD=56mm, and AD=100mm. At the instant when <DAB = 60° , the link AB has an angular velocity of 10.5 rad/sec in the counterclockwise direction. Both A and D lies in the horizontal plane.For the given configuration of the mechanism, determine the following: angular velocity of the link CD, angular velocity of the link BC, velocity of an offset point G on the link CD if CG=24mm,DG=44mm Instructions: configuration diagram Scale: 1:1 velocity diagram. Scale: 1m/s : 95mm
the shape mechanism to give a slow cutting stroke and quick return to a blade attracted to the sticker at c. determine the angular velocity of the link CB at the instant shown of the link AB is rotating at 5 rad/sec
In a four bar mechanism, the dimensions of the links are as given below:AB = 50 mm, BC = 66 mmCD = 56 mm and AD = 100 mmAt a given instant when | DAB=60°the angular velocity of link AB is 10.5rad/sec in CCW direction.Determine,i) Velocity of point Cii) Velocity of point E on link BC when BE = 40 mmiii) The angular velocity of link BC and CDiv) The velocity of an offset point F on link BC, if BF = 45 mm,CF = 30 mm and BCF is read clockwise.v) The velocity of an offset point G on link CD, if CG = 24mm, DG = 44 mm and DCG is read clockwise.vi) The velocity of rubbing of pins A, B, C and D. The ratios ofthe pins are 30 mm, 40 mm, 25 mm and 35 mmrespectively.
Please answer this NEATLY, COMPLETELY, and CORRECTLY for an UPVOTE. Arm AB has a clockwise angular velocity ωAB while the ring gear R has a counterclockwise angular velocity ωR. Using the Instantaneous Center (IC) Method, determine (a) the angular velocity (in rad/s) of gear B and (b) the velocity (in cm/s) of gear tooth D at the instant shown. Also, (c) illustrate the location of each rigid body’s instantaneous center. Utilize the following given:s = 13.5 cmrB = 6 cmωAB = 0.55 rad/sωR = 0.16 rad/s