A garden hose attached with a nozzle is used to filla 20 Liters bucket. The inner diameter of the hoseis d=8 cm, and it reduces to d= 5.17 cm at%3Dhosethe nozzle exit. If it takes 50 seconds to fill thebucket with water, determine average velocity (m/s)nozzleof water at the nozzle exit.NozzleGardenBuckethose

Name: A garden hose attached with a nozzle is used to filla 20 Liters bucke
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A garden hose attached with a nozzle is used to filla 20 Liters bucket. The inner diameter of the hoseis d=8 cm, and it reduces to d= 5.17 cm at%3Dhosethe nozzle exit. If it takes 50 seconds to fill thebucket with water, determine average velocity (

Answered: Image /qna-images/answer/f8ae3ffa-b46d-4a64-bb0e-c3ddaeffc30c.jpg

Engineering

Mechanical Engineering

A garden hose attached with a nozzle is used to fill a 20 Liters bucket. The inner diameter of the hose =8 cm, and it reduces to d the nozzle exit. If it takes 50 seconds to fill the bucket with water, determine average velocity (m/s) is d hose = 5.17 cm at %3D nozzle of water at the nozzle exit.

A garden hose attached with a nozzle is used to fill a 20 Liters bucket. The inner diameter of the hose =8 cm, and it reduces to d the nozzle exit. If it takes 50 seconds to fill the bucket with water, determine average velocity (m/s) is d hose = 5.17 cm at %3D nozzle of water at the nozzle exit.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In a horizontal pipe water flows at a rate of 9.1 L/s. Here, the pipe has two sections, one with a diameter of 10.16 cm and the other with a diameter of 5.08 cm, with a gradual smooth reducing section. In this case, a mercury manometer is used to measure the pressure difference. If friction is negligible how would I find the differential height of mercury between the two sections? If the manometer on the 5.08cm pipe section was replaced with a pitot tube how would the reading change? any help would be deeply appreciated
Water enters and leaves the 6-cm-diameter pipe bend inFig. P3.45 at an average velocity of 8.5 m/s. The horizontalforce to support the bend against momentum change is300 N. Find ( a ) the angle ϕ ; and ( b ) the vertical force onthe bend.
Please anybody answer this ASAP,i need the answer in 40 min Air flows isentropically through a channel To = 310 ° C. The two ends have identical areas, namely A = 25 cm², pressure p1 = 160 kPa and p2 = 65 kPa Determine a). Mass flow rate, b). Throat area and C). Ma2
If a jet is inclined upward 30O from the horizontal, what must be itsvelocity to reach over a 3-m wall at a horizontal distance of 18 m,neglecting friction?
A jet of water, issuing from sharp-edged vertical orifice under a constant head of 60 cm , has the horizontal and vertical coordinates measured from vena contracta at a certain point as 10. cm and 0.45 cm respevtively. Find Cc if Cd= 0.60.include your free body diagrama.0.612 b.0.962 c.0.98 d.0.623
A 22 L kerosene tank is filled with 2 cm diameter hose equipped with a 1.5 cm nozzle meter If it takes 20 s to fill the tank, determine the pressure differnce indicated by the nozzle if Cd= 0.96. The specific gravity of kerosene is 0.82. a.12.8 kPa b.11.8 kPa c.9.8 kPa d.10.8 kPa
If the difference between the total pressure and static pressure in an air duct is measured by a pitot tube to be 6.5 cm H2O, what is the flow velocity in m/s? Density of water is 998 kg/m3, and g = 9.81 m/s2. 3 signififcant figures answer
A pump is 2.2 m above the water level in the sump and has a pressure of –20 cm of mercury at the suction side. The suction pipe is of 20 cm diameter and the delivery pipe is short 25 cm diameter pipe ending in a nozzle of 8 cm diameter. If the nozzle is directed vertically upwards at an elevation of 4.2 m above the water sump level, determine the elevation in meters, above the water sump level, to which the jet would reach. Neglect all losses. a.24.04 b.0.10 c.20.31 d.0.52
Water (density 1000 kg/m?) flows through an inclined pipe of unform diametar. The velocity. pressura and elevation at section A are V, = 3.2 mis, p, =186 kPa and 2, = 245 m respectively, and those at section B ara V = 3.2 /s, py = 260 kPa and 2y = 9.1 m, respectivoly. If accaleration due 1o gravity /s 10 m/s* then the head lost due to friction is ‘m (round off 1o one decimal place).
Here, air (105 kPa) at 37 degrees celcius is flowing upward in a 6cm diamater inclined duct, at a rate of 90 L/s. In this case the density of air is 1.1 kg/m3. The diameter of the duct reduces to 4cm through a reducer and a pressure charge occurs. This pressure change is measured by a water manometer. The elevation difference between the points where the two arms of the manometer are attached is 0.2 meters. What is the differential height between the fluid levels in the two manometer arms?
A U-tube acts like a water siphon. The elbow in the tube is 1 m above the water surface, the tube outlet is L from point A below. When the length L is 5 m, the water emerges from the bottom of the siphon as free jet at atmospheric pressure. Determine the speed of the free jet and the minimum absolute pressure of the water at the elbow. (Patm= 101325 Pa, dsu=1000 kg/m3)
Two identical upright cylindrical tanks contains H2O,the first tank is full and the second is 2/3-full. If theradii of the orifices are the same, compare the time todrain of each tank. answer: √1.5