A glass window has an area of 1.6 square meter and a thickness of 4mm. If one side is at a temperature of 6.8 deg C and the other is at – 5 deg C, how much thermal energy flows through the window in a time of 24 hours? The thermal conductivity of glass is 1.89 x 10 -4 kCal/m-s-degC A.77075.712kCal B.88075.712kCal C.99075.712kCal D.66075.712kCal

A glass window has an area of 1.6 square meter and a thickness of 4mm. If one side is at a temperature of 6.8 deg C and the other is at – 5 deg C, how much thermal energy flows through the window in a time of 24 hours? The thermal conductivity of glass is 1.89 x 10 -4 kCal/m-s-degC A.77075.712kCal B.88075.712kCal C.99075.712kCal D.66075.712kCal

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter11: Energy In Thermal Processes

Section: Chapter Questions

Problem 50P: A Styrofoam box has a surface area of 0.80 m and a wall thickness of 2.0 cm. The temperature of the...

See similar textbooks

Similar questions

What mass of water at 25.0C must be allowed to conic to thermal equilibrium with a 1.85-kg cube of aluminum initially at 1.50 102C to lower the temperature of the aluminum to 65.0C? Assume any water turned to steam subsequently recondenses.
How much stress is cleated in a steel beam if its temperature changes from 15 to 40 but it cannot expand? For steel, the Young's modulus Y=210109N/m2 from Stress, Strain, and Elastic Modulus (http://cnx.org/content/m58342/latest/#fs-id1163713086230). (Ignore the change in area resulting from the expansion.)
A 1.00-kg block of copper at 20.0C is dropped into a large vessel of liquid nitrogen at 77.3 K. How many kilograms of nitrogen boil away by the time the copper reaches 77.3 K? (The specific heat of copper is 0.092 4 cal/g C, and the latent heat of vaporization of nitrogen is 48.0 cal/g.)
A Styrofoam box has a surface area of 0.80 m and a wall thickness of 2.0 cm. The temperature of the inner surface is 5.0C, and the outside temperature is 25C. If it takes 8.0 h for 5.0 kg of ice to melt in the container, determine the thermal conductivity of the Styrofoam.
A high-end gas stove usually has at least one burner rated at 14 000 Btu/h. (a) If you place a 0.25-kg aluminum pot containing 2.0 liters of water at 20.C on this burner, how long will it take to bring the water to a boil, assuming all the heat from the burner goes into the pot? (b) Once boiling begins how much time is required to boil all the water out of the pot?
A hollow aluminum cylinder 20.0 cm deep has an internal capacity of 2.000 L at 20.0C. It is completely filled with turpentine at 20.0C. The turpentine and the aluminum cylinder are then slowly warmed together to 80.0C. (a) How much turpentine overflows? (b) What is the volume of the turpentine remaining in the cylinder at 80.0C? (c) If the combination with this amount of turpentine is then cooled back to 20.0C, how far below the cylinders rim does the turpentines surface recede?
A wooden wall 4.00 cm thick made of pine with thermal conductivity 0.12 W/m K) has an area of 48.0 m2. If the temperature inside is 25C and the temperature out-side is 14C, at what rate is thermal energy transferred through the wall by conduction? (See Section 11.5.)
1. The temperature on a warm summer day is95°F. What is this temperature:a. in degrees Celsius?b. on the absolute (Kelvin) scale? 2. How much heat must be removed from a 200-gblock of copper to lower its temperature from150°C to 30°C? The specific heat capacity ofcopper is 0.093 cal/g·C°. 3. The volume of an ideal gas is increased from0.8 m3to 2.4 m3 while maintaining a constantpressure of 1000 Pa (1 Pa = 1 N/m2). How muchwork is done by the gas in this expansion?
While waiting for a phone call at 22B Baker Street, Mr. S. watches an incandescent light bulb glow. If the tungsten filament in the light bulb maintains a constant temperature of 2560°C and has a total surface area of 8.00x10-5m2, a) what is the emissivity of the filament if it radiates 7.20x103J of heat per minute into a room held at a temperature of 19.0°C? b) What would be the change in the entropy of the filament-room system, in Joules per Kelvin, during this time?
The core temperature of an athlete is 37 °C and his surface area is 1.8 m2. The thermal conductivity of his surface tissue, which is 6 mm thick on average, is 0.18W/m K. If heat is transferred from his core to his skin at a rate of 270W, what is the average temperature of his skin surface?
A glass window is 2.7 mm thick, is 1.59 m tall by 0.8 m wide, and has a thermal conductivity of 1.0 W/m K. What is the rate of heat loss (in W) through the window if the inside temperature is 20.7 °C and the outside temperature is -21.4 °C?