A groundwater well with produces 80 m/hr. and has a hydraulic conductivity of 20 m/d. Calculate the following: a. The length of the screen b. The diameter of the delivery pipe. c. The velocity head and the friction losses in the delivery pipe. d. What is the required power of the pump if the abstraction efficiency was 70%? Assume the following: The percentage of the opening in the screen is 17%, the entrance velocity is 1.55 cm/sec, the diameter of the screen is 30 cm, water velocity in the tube is 2.2 m/sec. Assume any missing data.

A groundwater well with produces 80 m/hr. and has a hydraulic conductivity of 20 m/d. Calculate the following: a. The length of the screen b. The diameter of the delivery pipe. c. The velocity head and the friction losses in the delivery pipe. d. What is the required power of the pump if the abstraction efficiency was 70%? Assume the following: The percentage of the opening in the screen is 17%, the entrance velocity is 1.55 cm/sec, the diameter of the screen is 30 cm, water velocity in the tube is 2.2 m/sec. Assume any missing data.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A pump discharges 50 tons of water per hour to a height of 8 m, overall efficiency of the pumping system being 69%, what is the input and output power?
The suction diameter of 60 mm reads 2 psi vaccum and 50 mm diameter discharge with 250kpag. The suction water level is 5 m above water pump centerline and discharge water levelis 25 m above water pump centerline and discharge is 2 m. If discharge is 0.01 m^3/s, findthe horsepower needed to pump the water for 80 percent pump efficiency.
Q Consider the following data relating toperformance of a centrifugal pump:speed 1200 rpm, flow rate 30 L/s, head 20 m, and power 5 kW. If the speed of the pump is increased to 1500 rpm, assuming the efficiency isunaltered, Find the new flow rate and head.
A centrifugal pump discharging 10 lps against 25 m of head and operating with an efficiency of 60% requires 4.1 kW at 1000 rpm. What is the theoretical discharge if the speed is increased to 1500 rpm assuming the efficiency remains constant? What is the theoretical head and kW at 1500 rpm?.
In oasis Water Company to purify the water, it is flowing through a reducer in a horizontal pipe where the diameter is reduced from 35 cm to 25 cm. The pressure in the 35 cm pipe just upstream of the reducer is 150 kPa. The fluid has a vapor pressure of 50 kPa and a specific weight of 5 kN/m3. Neglecting frictional effects, calculate flow rate of water through this pipe in lit/s. Draw diagram neatly
One industry has bought 4 centrifugal pumps. For each pump, the maximum total head is 25 m, and maximum discharge is 20 L/s, 30 L/s, 40 L/s, and 50 L/s, respectively. By using these pumps, how can 130 L/s discharge be achieved? – Explain. • Draw respective diagram(s) for this mechanism
ASAP A centrifugal pump that is used in pumping water to a tank operates at a rate of 1 gpm. The pump is driven directly by an electric motor with an input power of 1.5 hp running at a speed of 1700 rpm. The total head loss of the system is 10 m. If the motor drives the pump at 2200 rpm, what is the rate of flow of the pump?
Hydraulics 7. A turbine has a velocity of 6 m/s at the entrance to the draft tube and a velocity of 1,2 m/s at the exit. For the friction losses of 0.1 m and a tailwater of 5 m below the entrance to the draft tube, find the pressure head at the entrance.
Pumps: A centrifugal pump having 4 stages in parallel, delivers 18 kiloliters/min of liquid against a head of 25 m. The diameter of the impellers being 24 cm and the speed of 1800 rpm. A pump is to be made up with a number of stages in series of similar construction to that of the first pump to run at 1250 rpm and to deliver 15 kiloliters/min against a totalhead of 250 m. Find the diameter of the impellers and the number of stages required in this case. Answer: D = 46.63 cm, n = 6 stages
In oasis Water Company to purify the water, it is flowing through a reducer in a horizontal pipe where the diameter is reduced from 35 cm to 25 cm. The pressure in the 35 cm pipe just upstream of the reducer is 3 150 kPa. The fluid has a vapor pressure of 50 kPa and a specific weight of 5 kN/m . Neglecting frictional effects, calculate flow rate of water through this pipe in lit/s. Draw diagram neatly.
A fuel pump is delivering 18 gallons per minute of oil with a specific gravity of 0.80. The total head is 75 meters. If the power input to the pump is 1.1 hp, what is the eficiency of the pump?
The BEP for a pump operating at 1750 RPM with a 13-inch impeller is 1000 gpm, 150 ft. Using the pump affinity laws, determine what this pump head would correspond to if pump speed were changed to 2500 RPM.