A hollow cylinder of length 4 m has its cross section as shown in Figure below. If the cylinder is made of carbon (o = 105 mhos/m), the resistance between the ends of the cylinder. Take a = 3 cm, and b = 5 cm.

A hollow cylinder of length 4 m has its cross section as shown in Figure below. If the cylinder is made of carbon (o = 105 mhos/m), the resistance between the ends of the cylinder. Take a = 3 cm, and b = 5 cm.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.5.23P: Wires B and C are attached to a support at the left-hand end and to a pin-supported rigid bar at the...

See similar textbooks

Related questions

Q: A bar made of A-36 steel has the dimensions shown in Figure. If an axial force of P = 80 kN is…

Q: (b) Consider a square element in the x-y plane with side length of 3 cm. The thickness of the…

A: Solution of part c; Given:modulus of elasticity, E=80 GPaPoision's ratio, ϑ=0.3length of the cube,…

Q: Three bars each made of different materials are connected together and placed between two walls when…

A: Note:As per our guidelines we are supposed to answer only one question. Kindly repost other…

Q: A rectangular polypropylene [E = 6,200 MPa] bar (1) is connected to a rectangular nylon [ E = 1,400…

A: GIVEN DATA- Two bar connected at flange B For bar 1 A1=990mm2 , L1=1600mm , E1=6200MPa For bar 2…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: 1- The two uniform linearly elastic rods shown below are welded together at B, and the resulting…

Q: A bracket (shown in figure) is rigidly mounted on wall using four rivets. Each rivet is 6 mm in…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: A 10 mm diameter rivet holds three sheets of metal together and is loaded as shown in figure below,…

Q: A vertical concrete pipe of length L = 1.0 m, outside diameter dout 15 cm, inside diameter din = 10…

Q: aluminum tube with the cross section shown has a constant wall thickness of 2 mm. A torque T = 400…

Q: Consider the two bars of identical material with their elastic modulus E = 10 × 106 psi as shown in…

A: This problem can be solved by using various methods developed for determining the deflection,…

Q: Calculate the displacement of B-D-F points using the energy method or the Castigliano method. Cross…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: The cylindrical AC aluminum and CB steel bars in the figure are combined and placed between two…

Q: (b) Consider a square element in the x-y plane with side length of 3 cm. The thickness of the…

Q: ocO N G.65 m A-45 cm 0.35 m 13500 N Iross soctioni 22250 N

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: Q2. A thermo gate consist of an aluminum plate AB and a magnesium plate CD, each having a width of…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

A: Consider the free body diagram: Given: EB=70 GPaEC=200 GPaD=2 mmxc=0.6 mm

Q: Two steel wires AD and CD together with a copper wire BD is subjected to a force load as shown in…

Q: A steel bar 600mm long and having 30mm diameter, is turned down to 25mm diameter for one fourth of…

A: Given data: L=600 mmd=30 mm∆T=30°Cα=12.5×10-6/°CE=200 GN/m2

Q: The vertical reaction in the hinged support shown in the figure is Blank 1 N. 200 N 200 N B E 2 m 2…

Q: Consider the vessel in which the wall thickness of the cylindrical and hemispherical portions has a…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: Determine the maximum shear force in kN in the figure below. 2 kN/m B A C 5 kN 4 m 2 m O -10 O 10 O…

Q: A steel [E = 30,600 ksi; a = 6.6 x 106/°F] pipe column (1) with a cross-sectional area of A₁ - 5.90…

A: Given that: For steel pipe, (pipe 1): E1 = 30600 kis = 30600 × 103 psi α1 = 6.6×10-6 /oF A1= 5.9 in2…

Q: A bar ABC length L consists of two parts of equal lengths but different diameters.Segment AB has…

A: Given: P=110 kN shortening of the bar = 0.8 mm (a)Maximum allowable diameter (b) distance b from…

Q: A rectangular bar of length L has a slot in the central half of its length. The bar has width b,…

A: Write the given data. L=520 mmE=74 GPaσavg=190 MPa

Q: A circular column is made of concrete [E. = 4.2(10³)ksi] while being reinforced with six steel rods…

A: I have attached my answer below, please refer and give me +ve rating, Thanks!

Q: * The rectangular block of material of length L and cross-sectional area A tits snugly between two…

Q: The two cylindrical rod segments shown in the figure below (Figure 1) are fixed to the rigid walls…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

Q: 2. Two steel cables support an applied load of 100 kN as shown in the figure below. Determine the…

A: Given-Data:- P=100KN To- Find:- a) The deformation of member AC and BC b)The vertical and horizontal…

Q: A 480-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal,…

A: Given data as per question Weight of block = 480 N Weight of rod = 110 N Angle =300

Q: The cylindrical AC aluminum and CB steel bars in the figure are combined and placed between two…

Q: The cross-sectional diameter of aluminum nail measures 1.50 mm and it is projected outward to a…

A: Given, d=1.5 mm=0.0015 mL=3.5 cm=0.035 mm=3.60 kgG=2.4×1010 N/m2

Q: A rigid beam is supported by a pin at A and wo metallic wires at B and C. Determine the orce P that…

Q: e B) = 70 Gpa

Q: II. A circular column is made of concrete [E. 4.2(103)ksi] while being reinforced with six steel…

A: Given Data: The modulus of elasticity of concrete is, Ec=4.2×103 ksi. The modulus of elasticity of…

Q: (2) Q1 what the value of P Which are safer on the rivets as shown in figure below. given that :…

Q: Three cables having an area of 0.05 in^2 each is carrying the load W as shown. With no stress, the…

A: Find the stress in intermediate wire.

Q: diameter pipe as shown in the figure, the critical If a foam insulation is added to a 4 cm outer…

Q: A straight bar 450 mm long is 10 mm in diameter for the first 200 mm length and 20 mm in diameter…

A: Given data: L=450 mmd1=10 mmL1=200 mmd2=20 mmF=10 kNE=2×105 N/mm2 Need to determine the decrease in…

Q: flection at C to be z

A: given:

Q: The temperature of an aluminum bar and a steel bar was raised from 40°C to 160°C. If there was a gap…

A: As per given question determine the normal stress in the aluminum bar and the change in length of…

Q: hand written plz Shown in the figures (1) and (2) are trusses containing members that are made of…

A: To choose: The correct option. Given: The modulus of elasticity of material of the members are same…

Concept explainers

Free undamped vibrations

Whenever an object/system displaces in either side of its equilibrium position with the help of an external/internal means, then the object/system moves regularly or randomly on both sides of its equilibrium position. This motion is called vibration. Generally, there are three types of vibration: longitudinal vibration, transverse vibration, and torsional vibration.

Question

A hollow cylinder of length 4 m has its cross section as shown in Figure below. If the cylinder is made of
carbon (o = 105 mhos/m), the resistance between the ends of the cylinder. Take a = 3 cm,
and b = 5 cm.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Two cylinders, 0.75 m in diameter (upper cylinder is 1.5 m long, k = 0.5 W/m-K; lower cylinder is 1.1 m long, k = 1.3 W/m-K) are inside a frustum of a square pyramid (k = 0.053 W/m-K) as shown in the diagram. The upper face is at 250 oC and the lower base is at 100 oC. Calculate the resistance in A (in K/W).
A mass of 1019Kg is supported by two wires A and B each made of a different material. Before loading the wires are of equal length. After loading they are still of equal length. Find the load carried by each wire. Wire Diameter mm E Nmm-2 A 1 206,000 B 2 116,000
The cylindrical AC aluminum and CB steel bars in the figure are combined and placed between two rigid plates at A and B, but there is a gap of A=0.1 mm between the B plate and the bars. The modulus of elasticity of aluminum is E-70 GPa and the cross-sectional area is A-400 mm², the modulus of elasticity of steel is Eç-210 GPa and the cross-sectional area is -200 mm³. the lengths of the bars are LAC-200 mm and L CB-600 mm. Since a load of P-30 kN is applied to point C What is the stress in the AC aluminum bar?
The cylindrical AC aluminum and CB steel bars in the figure are combined and placed between two rigid plates at A and B, but there is a gap of A=0.1 mm between the B plate and the bars. The modulus of elasticity of aluminum is E-70 GPa and the cross-sectional area is A-400 mm², the modulus of elasticity of steel is Eç-210 GPa and the cross-sectional area is -200 mm³. the lengths of the bars are LAC-200 mm and L CB-600 mm. Since a load of P-30 kN is applied to point C What is the displacement of the bar AC?
A copper and steel wires are welded together at their ends. The original length of each is 50 cm with the total length of 100cm and each has a diameter of 0.78 mm. A mass of 10 kg is suspended from the combined wire. By how much will the combination stretch? Ycopper=100 GPa, Ysteel= 210 GPa.
The two cylindrical rod segments shown in the figure below (Figure 1) are fixed to the rigid walls such that there is a gap of 0.01 in. between them when T1=75 degrees F . Each rod has a diameter of 1.5 in. Take αal=13(10^-6)/∘F ,Eal=10(10^3)ksi, (σY)al=40ksi, αcu=9.4(10^−6)/∘F, (σY)cu=50ksi, and Ecu=15(10^3)ksi. a) What larger temperature T2 is required in order to just close the gap? b) Determine the magnitude of the average normal stress in each rod if T2=350∘F
A [0/90/0/±45]s Glass/Epoxy laminate is subjected to the following mechanical loads: Nx =Ny= 80*10^5 N/m. The thickness of each lamina is 0.25 mm. Longitudinal modulus of elasticity = E1 = 38.6 GPa , Transverse modulus of elasticity = E2 = 8.27 GPa , Poisons Ratio 0.26. a) Determine the local stresses at the top of 45° ply
A rigid beam is supported by a pin at A and two metallic wires at Band C. Determine the force P that causes the point C to displace downward by 0.2 mm. Given: E (wire B) 70 Gpa, E (wire C) = 200 Gpa and both wires have a diameter D 5 mm. Consider a linear elastic behavior.
A bar ABC length L consists of two parts of equal lengths but different diameters.Segment AB has diameter dt=100 mm,and segment BC has diameter d2 = 60 mm.Both segments have a length B2=0.6 m.A longitudinal hole of diameter d is drilled through segment AB for one half of its length (distance L/4 = 0.3 m).The bar is made plastic having a module of elasticity E=4.0 GPa.Comprssive loads P = 110 KN act at the ends of the bar. (a) If the shortening of the bar is limited to 8.0 mm.What is the maximum allowable diameter dma of the hole? (see the figure part a.) (b) Now if daxx is instead set at p1/2 . at what distanc h from end c should load P be applied to limit the bar shortening to 8.0 mm?(see the figure part b) (c) Finally if loads t are applied at the ends and "mm is the permissible length.v of the hole if shortening is to be limited to 8.0 mm?(see the figure part c)
A storage tank is 5m in diameter, 4m high and contains fluid with density of 795 kg/m^3. Determine the required wall thickness if the yield stress of the material is 325 MPa, the factor of safety is 10 and the efficiency of the longitudinal joint is 80%
A straight bar 450 mm long is 10 mm in diameter for the first 200 mm length and 20 mm in diameter for the remaining length. If the bar is subjected to an axial push of 10 kN, determine decrease in length of the bar. Take modulus of elasticity of bar material E = 2 × 105 N/mm²
There is a gap c = 1mm between the rods in the picture, the temperature changes evenly quantitatively ΔT = 1.9°C. Calculate the normal force on the cross section of the rods. E1 = 200 GPa, L = 1.0 m, E2 = 80 GPa, A1 = 5000 mm2, A2 = 2000 mm2, α1 = 12*10-61/°C, α2 = 8*10-61/°C