A lap wound dc generator having 50slots with 15conductors per slot generated at no led emf of 400v when running at 1000 rpm suppose if the same generator is desired to genate 220v on open circuit. Suggest the speed at which it has to be rotated
Q: 15. A 1500 kW, 550-V, 16 pole generator runs at 150 rev. per min. What must be the useful flux if…
A:
Q: A long shunt compound dc generator delivers a load current of 69 A at 396 V and has armature, series…
A: First we will find shunt field current using following formula Ish =Vt/Rsh. For generator, Armature…
Q: Q4 A dc shunt generator 50 V at the load 6A, rotating 700 r.p.m at the torque 4 N.m. Find the…
A: The solution can be achieved as follows.
Q: A 3 phase 4MVA, 12 kV star connected synchronous generator has Zs= 0.8+J30 ohm. Using circle diagram…
A: 3φ synchronous generator,4MVA,12kVZs=0.8+j30 ΩZs=R+jX ΩR=0.8Ω
Q: 4. In a three-phase, 4-pole, PMAC motor, the torque constant kr= 0.5 Nm/A. Calculate the phase…
A:
Q: LA 25 KW, 250V, dc shunt generator has armature and field resistance of 0.060 and 100 Q…
A:
Q: A 80 MVA synchronous generator has Xs = j8Ω. The generator is supplying its rated power to an…
A: Given synchronous generator :80 MVA Xs = j8 Ω. bus voltage :33KV and power factor : 0.9
Q: Q7) A long shunt compound DC generator delivers a load current of 150A at 230V and has armature,…
A: A long shunt compound generator, Delivered current 150A. At 230V. All parameters are given. Find…
Q: A shunt generator has a no-load terminal voltage of 270 and a voltage of 245 when it delivers 180…
A: Given shunt generator has no-load terminal voltage of 270 v and Terminal voltage of 245 v when it…
Q: A. A 20KW, 440V, SHORT SHUNT COMPOUND DC GENERATOR HAS FULL LOAD EFFICIENCY OF 87%. IF THE…
A: NOTE: We’ll answer the first question since the exact one wasn’t specified. Please submit a new…
Q: A 3 phase 1.2 MVA, 10 kV star connected synchronous generator has Zs= 0.2+J10 ohm. Using circle…
A: Synchronous Generators, often known as alternators, are the most commonly used generators for…
Q: A 480 V, 50 Hz, Y-connected six-pole synchronous generator has a per-phase synchronous reactance of…
A: The synchronous generator is rotating at the synchronous speed. Thus, the speed of the rotation of…
Q: A 220 V, 60 Hz, supply is connected to 200-turn armature winding of reluctance 1.7×10 At/Wb. Find…
A: Given No of turns ,reluctance of an armature winding connected to a AC supply. We need to…
Q: A shunt generator supplies a 34kW load at 225V through cables of resistance, R = 126m2. If the field…
A:
Q: a dc shunt generator supplies a load of 10kW at 250V calculate the induced emf,if the armature…
A: DC Generator: DC Generator is an electrical device which converts mechanical input energy into…
Q: With the aid of mathematical expressions where necessary, explain the following terms with respect…
A:
Q: A shunt-excited DC generator has Vt vs Field current data curves as shown, for a machine running at…
A: Dear student as per our guidelines we are supposed to answer only one question .kindly report the…
Q: Q3 A cumulatively compounded dc generator is operating properly as a flat-compounded de generator.…
A:
Q: A 3 phase 1.2 MVA, 10 kV star connected synchronous generator has Zs= 0.2+J10 ohm. Using circle…
A: A Synchronous Generator is also known as the alternator, the most widely used generator for power…
Q: 3-phase, 50 Hz, 4-pole, 220 V, 10A ASM has an ASM 0.85 back power coefficient. stator copper losses…
A: Part (a): It is given that the line voltage of ASM is 220 V and the line current is 10 A with a 0.85…
Q: Q2/ The gross power absorbed by the reverse and forward fields of a single- phase induction motor is…
A:
Q: A long-shunt, four pole, 1500-W, 250-V, duplex wave-wound DC compound generator with the rated speed…
A: we need to find out (a) the generated voltage, (b) the field currents, (c) the power generated in…
Q: Q3 Show that, if the stator resistance of a three-phase induction motor is negligible, the ratio of…
A: Three-phase induction motor. This is an electromechanical motor and works on the induction…
Q: A shunt generator has an external characteristics whose terminal voltage given by the equation…
A: By ohms law , Load current IL = Vt/load resistance RL. From above Vt= IL×R. Using above equation…
Q: Q1) A 4-pole, separately excited, wave wound DC machine with 0.12 armature resistance is rated for…
A: For wave winding rating of machine 5kW then what is rating of winding reconstruction as LAP winding?…
Q: A short-shunt d.c. compound generator supplies 100A at 70V. The resistance of armature, series field…
A: Armature current =load current +shunt field current. Generated emf =terminal voltage +drop in…
Q: A three-phase, 60-Hz, 500-MVA, 11.8-kV, 4-pole steam turbine-generating unit has an H constant of 6…
A:
Q: 2. A 8-pole, lap-connected, 25kW, 250V long shunt compound dc generator has a series field…
A:
Q: A 220 V, 60 Hz, supply is connected to 200-turn armature winding of reluctance 1.7×10° At/Wb. Find…
A: A 220 V ,60 Hz,supply is connected to 200 turn armature winding of reluctance 1.7×105 AtWb .Find the…
Q: . The armature of a 6-pole separately excited dc generator is triplex wave wound with 534…
A:
Q: Q1. shunt generator delivers a full-Hoad outpu power of 8 Kw at 200 V. It has an armature and shunt…
A: According to our policy , we will answer only the first part of the question . If you want solution…
Q: Q1. shunt generator delivers a full-Hoad outpu power of 8 Kw at 200 v. It has an armature and shunt…
A: We are authorized to answer one question at a time, since you have not mentioned which question you…
Q: 5. The frequency of magnetic reversal (f) is given by.. 3. In a DC motor, the mechanical power…
A: 1). According to Faradays law of electromagnetic induction the induced emf is given by Eind = -N ×…
Q: Two separately excited DC generators are connected in parallel to supply a total load of 300 A. The…
A: Current shared by generator is such that terminal voltage is same for both generators. power output…
Q: A 4 pole lap wound shunt generator delivers 200A at a terminal voltage of 220V. Ra and Rsh are 0.02Ω…
A: For this problem, given terminal voltage is 220V, armature resistance 0.02ohms.
Q: Electrical Engineering Consider a balanced 3-phase current flowing into the stator of a 2-pole…
A:
Q: Q8. Which of the following quantities should be kept constant when experimentally determining the…
A: “Since you have asked multiple questions, we will solve the first question for you. If youwant any…
Q: A long-shunt d.c. compound generator supplies 100A at 290V. The resistance of armature, series field…
A:
Q: Problem: The field current of a 100-kW, 250V shunt generator is 5A when delivering power at rated…
A: DC machines (Generator/ Motor) are the important parts of electrical drives. These machines are used…
Q: Example 29.2. A separately excited D.C. generator has armature circuit resistance of 0.1 ohm and the…
A: In this question we need to find a load current when generator running at 700 rpm
Q: A 4-pole dc motor is lap-wound with 480 conductors. The average flux density and the cross -…
A:
Q: True False In self-excited DC generator, the residual flux is primary condition in e.m.f generation…
A: 1. The back e.m.f opposes the supply voltage. The supply voltage induces the current in the coil…
Q: If the average pole flux of a dc machine with 24 coils, each of which contains 16 windings, 4 poles,…
A: In this question, Find the voltage across the winding. If flux per pole = 15m wb Pole P= 4 LAP…
Q: A separately excited D.C. generator has armature circuit resistance of 0.15 Q. When running at 900…
A: In this question, A separately excited DC generator, Armature resistance Ra= 0.15 ohm Speed N=…
Q: Q2: A500 kW, 500 V, 10 poles d.c generator has lap wound armature Find the electrical angle shift of…
A: the magnetic neutral axis usually shifts in the same direction as of generator and opposite in the…
Q: A 4-pole lap wound generator with 780 armature conductor and an armature current of 60 A, the…
A: Given, Total number of pole, P=4. Total number of conductor, Z=780. Armature current, Ia=60 A. For…
Q: Q/ dc shunt generator 4 pole with 500 condcutor , wave running at speed 1000 r.p.m the resistance of…
A:
Q: A long shunt compound DC generator delivers a load current of 150A at 230V and has armature, series…
A: In the DC long shunt compound generator Find the induced power ? Total generated power? Total…
Q: A 220V long shunt generator has armature, shunt field, and series field resistances of 20, 5502, and…
A: In this question we will find armature current...
A lap wound dc generator having 50slots with 15conductors per slot generated at no led emf of 400v when running at 1000 rpm suppose if the same generator is desired to genate 220v on open circuit. Suggest the speed at which it has to be rotated
Step by step
Solved in 2 steps with 1 images
- Show that an alternator running in parallel on constant-voltage and frequency bus-bars has a natural time period of oscillation. Deduce a formula for the time of one complete oscillation and calculate its value for a 5000-kVA, 3-phase, 10,000-V machine running at 1500 r.p.m. on constant 50-Hz bus-bars. The moment of inertia of the whole moving system is 14,112 kg-m2 and the steady short-circuit is five times the normal full-load value. ANSWER IS [1.33 second]A short shunt compound generator supplies a load of 10 kW at 200 V through a pair of feeder and series field resistance 0.10 ohm. Armature resistance, shunt field resistance and series field resistance are 0.01 ohm, 52.2 ohms and 0.10 ohm, respectively. If the core friction and windage losses amount to 631 watts, the BHP of the driving engine is nearest toThe synchronous reactance of the direct-axis and quadrature-axis of a three-phase,40-pole, 50 Hz, 13,8 kV, salient-pole synchronous generator is 2,38 Ω and 1,33 Ωrespectively. The resistance of the star-connected stator is negligible. The load angle ofthe machine is 30°e and the excitation is set to induce an emf of 167%. Sketch the phasordiagram and calculate:(a) current(b) power(c) reluctance torque(d) the maximum load angle(e) the maximum power developed
- The armature of a 6-pole separately excited dc generator is triplex wave wound with 534 conductors. This machine delivers power to the load at 200V while being driven at 900rpm. At this load, the armature circuit dissipates 640W. If the flux of this generator is 180-mWb, determine the kW rating of the load served. Assume a total brush drop of 2V.A 4-pole dc motor is lap-wound with 480 conductors. The average flux density and the cross - sectional area over one-pole-pitch are 0.4 T and 16m2 respectively. Find the torque developed when the motor is drawing 30A and running at 1500 rpm.Q2: A500 kW, 500 V, 10 poles d.c generator has lap wound armature Find the electrical angle shift of brushes when AT4 / pole = 208 AT. If the ATC for same generator when connected as wave wound is 2600 AT when the brushes on G.N.A.
- . A 480-V 200-kVA 0.8-power-factor-lagging 60-Hz two-pole Y-connected synchronous generator has asynchronous reactance of 0.25 Ω and an armature resistance of 0.03 Ω. At 60 Hz, its friction and windagelosses are 6 kW, and its core losses are 4 kW. The field circuit has a dc voltage of 200 V, and themaximum IF is 10 A. The resistance of the field circuit is adjustable over the range from 20 to 200 Ω.The OCC of this generator is shown in Figure P5-1.(a) How much field current is required to make VT equal to 480 V when the generator is running at noload?(b) What is the internal generated voltage of this machine at rated conditions?(c) How much field current is required to make VT equal to 480 V when the generator is running at ratedconditions?(d) How much power and torque must the generator’s prime mover be capable of supplying?A dc shunt generator 50 V at the load 6A, rotating 700 r.p.m at the torque 4 N.m. Find the efficiency of generator?Q2: A500 kW , 500 V, 10 poles d.c generator has lap wound armature Find the electrical angle shift of brushes when ATd / pole = 208 AT . If the ATC for same generator when connected as wave wound is 2600 AT when the brushes on G.N.A .
- Q/ dc shunt generator 4 pole with 500 condcutor , wave running at speed 1000 r.p.m the resistance of armature and field are 0.02 , 55 ohm and delivering load 43.12kwatt at terminal voltage 220 volt, the iron losses is 750 watt 1-Torque developed by the prime mover .........and The torque developed by the armature ........... when running at 1000 r.p.m * 2-The load current ,,,,,,,,,,,,when the speed drops to 800 r.p.m. if If is unchanged ? * 3-Output of the prime motor…….kwatt * 4-Mechanical , electrical and overall efficiency …….. * 5-Flux per pole is......... wb *A long shunt compound generator delivers 100 A at 250 V. The armature, shunt field and series field resistances are 0.02 Ohms, 50 Ohms and 0.05 Ohms respectively. If the Break Horse Power (BHP) or the power developed by the shaft torque of the driving engine is 40, determine the stray loss.How many poles should a 60-Hz generator have, if it is connected to a turbine operating undera design head of 3000 ft with a flow of 82 cubic feet per second? Assume turbine specific speedand efficiency of 3 rpm and 84% respectively.