A load of 1000 KW is connected at the receiving end of a 3 phase transmission line 60 km long. The parameters of the transmission line are given by r = 0.08 0/km and x = 0.7 0/km. The voltage at the receiving end of the transmission line is rated at 21 kV. If the machine is working at 0.75 power factor lagging. Determine: a) The series reactance of the transmission line b) Sending end line voltage c) Percentage Voltage regulation d) Percentage Efficiency

A load of 1000 KW is connected at the receiving end of a 3 phase transmission line 60 km long. The parameters of the transmission line are given by r = 0.08 0/km and x = 0.7 0/km. The voltage at the receiving end of the transmission line is rated at 21 kV. If the machine is working at 0.75 power factor lagging. Determine: a) The series reactance of the transmission line b) Sending end line voltage c) Percentage Voltage regulation d) Percentage Efficiency

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.26P: A small manufacturing plant is located 2 km down a transmission line, which has a series reactance...

See similar textbooks

Similar questions

A 40-km, 220-kV, 60-Hz, three-phase overhead transmission line has a per-phase resistance of 0.15/km, a per-phase inductance of 1.3263 mH/km, and negligible shunt capacitance. Using the short line model, find the sending-end voltage, voltage regulation, sending-end power, and transmission line efficiency when the line is supplying a three-phase load of (a) 381 MVA at 0.8 power factor lagging and at 220 kV and (b) 381 MVA at 0.8 power factor leading and at 220 kV.
Consider a long radial line terminated in its characteristic impedance Zc. Determine the following: (a) V1/I1, known as the driving point impedance. (b) | V2 |/V1|, known as the voltage gain, in terms of al. (c) | I2 |/| I1 |, known as the current gain, in terms of al. (d) The complex power gain, S21/S12, in terms of al. (e) The real power efficiency, (P21/P12)=, terms of al. Note: 1 refers to sending end and 2 refers to receiving end. (S21) is the complex power received at 2; S12 is sent from 1.
A 46-kv 0.8-lagging power factor load is connected to the end of a short transmission line where the voltage is 230. If the line resistance and reactance are 0.06 and 0.08 ohm, respectively, calculate the voltage at the sending end.
A short 3 phase transmission line, connected to a 33kV, 50 Hz generating station at the sending end is required to supply a load of 10Megawatts at 0.8 power factor lagging, 30kV at the receiving end. If the minimum transmission line efficiency is to be limited to 96%, estimate the per phase values of resistance and inductance of the line.
A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0•85 p.f. lagging by means of a transmission line. The series impedance of a single conductor is (20 + j52) ohms and the total phases-neutral admittance is 315 microsiemens. Shunt leakage may be neglected. Using the nominal T approximation, calculate the line voltage at the sending end of the line. If the load is removed and the sending end voltage remains constant, find the percentage rise in voltage at the receiving end.
1/In the Transmission Line Simulator, the Transmission Line is connected in Nominal-Pi Circuit. Select one: True False
A 60 Hz, three-phase transmission line is 100 miles long. It has a total seriesimpedance of {35 + j120) n and a shunt admittance of j930 μsiemen. It delivers40 MW at 220 kV with 90% lagging power factor. Find the voltage at the sendingend by:(a) short line approximation(b) the nominal rr approximation(c) the nominal T approximationAlso determine the voltage regulation for the given line and the power loss.Assume the sending end voltage remains constant. Expected Answer: (a) 237.67 kV, 1.4284 MW, 8.03%; (b) 225.8 kV, 1.1642 MW, 8.67% (c) 225.10 kV, 1.5095 MW, 8.35% Pls. Provide Full Solution for thumbs up
A 500 kV, 60 Hz uncompensated three-phase transmission line is 500 km long. The line has three ACSR 1113-kcmil (Finch) conductors per phase with parameters Current carrying capability of single ACSR 1113-kcmil (Finch) conductor is 1,110 A. Calculate the theoretical maximum (steady state stability limit) real power that this line can deliver and compare with the thermal limit of the line. Assume VS = VR = 1.0 per unit and unity power factor at the receiving end.
a) Find the IBC load currentb) Give the VCA line voltagec) Calculate the total complex power on the transmission line.
Transmission and Distribution of Electric Power Answer the Following Question Please: Q) Three-phase transmission line, 60HZ, have: (50 MW, 0.866 lagging p.f. and 132 kv in receiving end. If the line have (Z = 100 <80 Ohm / phase and Y = 0.0012 <90 S). Calculate: Vs, Is, Vreg, and power factor in sending end. Also, find the transmission efficiency? For the following transmission models: 1- Short transmission line model. 2- Medium transmission line (pi) model. 3- Medium transmission line (T) model. 4- Long transmission line model. (Please show your answer steps)
A balanced load of 30MW is supplied at 132 kV, 50Hz and 0.85 p.f. lagging by means of a transmission line. The series impedance of a single conductor is (20+j 52) ohms and the total phase-neutral admittance is 315 micro mho. Shunt leakage may be neglected. Using the nominal T and π approximation, calculate the line voltage at the sending end of the line. If the load is removed and the sending end voltage remains constant, find the percentage rise in the voltage at the receiving end.
Viva Questions:1. What is the difference between Primary and Secondary constants? 2.Define Transmission line Input Impedance?