A nylon [E = 360 ksi; v= 0.4] rod (1) having a diameter of di = 2.50 in. is placed inside a steel [E = 29,000 ksi; v 0.29] tube (2) as shown in Figure P3.7. The inside diameter of the steel tube is d = 2.52 in. An external load P is applied to the nylon rod, compressing it. At what value of P will the space between the nylon rod and the steel tube be closed?

A nylon [E = 360 ksi; v= 0.4] rod (1) having a diameter of di = 2.50 in. is placed inside a steel [E = 29,000 ksi; v 0.29] tube (2) as shown in Figure P3.7. The inside diameter of the steel tube is d = 2.52 in. An external load P is applied to the nylon rod, compressing it. At what value of P will the space between the nylon rod and the steel tube be closed?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

plzzzz help me nowww What is the minimum Block mass (kg) that is required to open the gate A-B? The density of water is 1000 kg/m3 and the density of the block is 8000 kg/m3. The specific gravity of oil is 0.9. The depth of the gate is not required. The external force that effects the gate at point A is Fe=3000 N, while the hydrostatic force Fh=9313.8 N
d. Calculate "P" in KN considering failure on shear on rivets Two A36 16mm Thick Steel Plates Are Connected By Four Rivets With Fv=152 MPa As Shown. Given: Rivet Dia 20 mm x=100 mm
The aluminum rod AB (G=27 ???) is bonded to the brass rod BD (? =39 ???). Portion CD of the brass rod is hollow and has an inner diameter of 40 mm. Determine (a) the angle of twist at B. (b) the angle of twist in A
A light-gage cold-formed steel channel used as purlins are simply supported on the roof truss 4m apart. Sag rods are placed at midspan. Assuming compact section and loads acting on the flange. Use ASD method. The roof continously braces the purlin. Given: Purlin Spacing = 1.5 m Slope = 15 degrees DL = 2.5 kpa LL = 2.5 kpa WL = 1.0 kpa Windward coefficient = 0.25 Properties of channel section: Sx = 185.17x10^3 mm3 Sy = 16.55x10^3 mm3 Zx = 223x10^3 mm3 Zy = 33.4x10^3 mm3 rts = 21 mm ry = 16.79mm Cb = 1.30 Determine allowable flexure strength about the y-axis and x-axis. (kN/m)
Rigid members ABC and DEF are joined bysteel (Es = 180 GPa) links BE and CF. The steellinks consist of rectangular plates with crosssectional dimensions 25x35-mm. Determine:a) the change in length of BE and CFb) the distance between pts. A and D after theloading is applied. Pts. A and D are 240mm apart prior to the applied loading.
Bar B Of The Pin-connected System Of Fig. P5-66 Is Made Of An Aluminum Alloy [E = 70 GPa, A = 300 Mm^2, And Alpha = 22.5 (10^-6)/degree C]. And Bar A Is Made Of A Hardened Carbon Steel[E = 210 GPa, A = 1200 mm^2, And Alpha = 11.9 (10^-6/degree C]. Bar CDE Is To Be Considered Rigid. When The System Is Unloaded At 40 Degree C, Bars A And B Are Unstressed.
Two 10"-15.3 lb channels are welded together as shown in the figure. Find the moment of area of the upper channel about the horizontal centroidal axis Xo of the entire section.
b. Calculate "P" in KN considering tension failure on net area Two A36 16mm Thick Steel Plates Are Connected By Four Rivets With Fv=152 MPa As Shown. Given: Rivet Dia 20 mm x=100 mm
A frustum of rectangular pyramid is immersed in water by anchoring it to the bottom ofthe seabed. The dimension of the base of pyramid is 4 m x 6 m and the height of frustumis 3 m. The lower base of the frustum is thrice of the upper base. The mooring line wasobserved to have a tension of 12000 N. Evaluate the specific weight of the frustum inkN/m3.
Axial loads are applied to the compound rod that is composed of an aluminum segment rigidly connected between steel and bronze segments. What is the stress in each material given that P = 15 kN? Specify whether tension or compression. Bronze Aluminum Steel A=400 mm? A=600 mm? A= 300 mm? 2P 3P 4P P -3 m + 5 m -4m
The following solid aluminum bar (E = 10,000 ksi; α = 11.70E-06/F) is located between two fixed supports. Segment AB has a diameter of 3 inches and segment CB has a diameter of 2 inches. The load P is equal to 25 kip and the temperature increases by 50°F. Determine: a. The reactions at the supports. Answ: Cy = 17.938 kip (downward); Ay = 42.938 kip (upward). b. The deformation at point B. Answ: 2.693E-03 pulg. c. The stress in both segments. Anws: 5.709 ksi, 6.07 ksi.
A steel pipe (1) is attached to an aluminum pipe (2) at flange B. The pipes are attached to rigid supports at A and C, respectively 18 m 14 m Member (a) has a cross-sectional area A,-3,600 mm2, an elastic modul as a cross-sectional area A 3,600 mm2, an elastic modulus E-200 GPa, and an allowable has a cross-sectional area A2 2,o00 mm2, an elastie modulus E-70 GPa, and an allowable normal stress of 120 MPa. Determine the maximum load Pthat can be applied to fange B without exceeding either allowable stress