A piece of steel has a height of ten meters and a unit cross-sectional area of 5.0 m³. It supports a mass of 30,000 kg. Determine (a) the stress, (b) the strain, and (c) the change in height of the steel. Acceleration due to gravity (g) = 9.8 m/s². Young's modulus of concrete = 20 × 10°N/m² %3D

A piece of steel has a height of ten meters and a unit cross-sectional area of 5.0 m³. It supports a mass of 30,000 kg. Determine (a) the stress, (b) the strain, and (c) the change in height of the steel. Acceleration due to gravity (g) = 9.8 m/s². Young's modulus of concrete = 20 × 10°N/m² %3D

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter14: Static Equilibrium, Elasticity, And Fracture

Section: Chapter Questions

Problem 66PQ: A steel cable 2.00 m in length and with cross-sectional radius 0.350 mm is used to suspend from the...

See similar textbooks

Similar questions

Normal forces of magnitude 1.0106N are applied uniformly to a spherical surface enclosing a volume of a liquid. This causes the radius of the surface to decrease from 50.000 cm to 49.995 cm. What is the bulk modulus of the liquid?
Two rods, one made of copper and the other of steel, have the same dimensions. If the copper rod stretches by 0.15mm under some stress, how much does the steel rod stretch under the same stress?
Two thin rods, one made of steel and the other of aluminium, are joined end to end. Each rod is 2.0m long and has cross-sectional area 9.1mm2 . If a 10,000N tensile force is applied at each end of the combination, find: (a) stress in each rod; (b) strain in each rod; and, (c) elongation of each rod.
Can Young’s modulus have a negative value? What about the bulk modulus?
An aluminium (=2.7g/cm3) wire is suspended from the ceiling and hangs vertically. How long must the wire be before the stress at its upper end reaches the proportionality limit, which is 8.0107N/m2 ?
Can compress stress be applied to a rubber band?
A 90-kg mountain climber bangs from a nylon rope and stretches it by 25.0 cm. If the rope was originally 30.0 m bog and its diameter is 1.0 cm, is Young’s modulus for the nylon?
The bulk modulus of a material is 1.01011N/m2 . What fractional change in volume does a piece of this material undergo when it is subjected to a bulk stress increase of 107N/m2 ? Assume that the force is applied uniformly over the surface.
Is surface tension due to cohesive or adhesive forces, or both?
Check Your Understanding A 2.0-m-long wire stretches 1.0 mm when subjected to a load. What is the tensile strain in the wire?
Check Your Understanding Find the compressive stress and strain at the base of Nelson’s column.
A steel cable 2.00 m in length and with cross-sectional radius 0.350 mm is used to suspend from the ceiling a 10.0-kg model aircraft that is flying in a horizontal circle with an angular speed of 6.00 rad/s. What is the strain produced in the cable?