A rankine cycle with three stages of reheating is executed with steam expanding initially from 18.111 Mpa and 540oC. The pressure of three reheaters are 4.0111 Mpa, 2.5111 Mpa and 0.98111 Mpa, and the steam leaves the first reheater at 500oC, the second 480oC. Condensation occurs at 0.4111 Mpa. Calculate W,ec, and ee.

A rankine cycle with three stages of reheating is executed with steam expanding initially from 18.111 Mpa and 540oC. The pressure of three reheaters are 4.0111 Mpa, 2.5111 Mpa and 0.98111 Mpa, and the steam leaves the first reheater at 500oC, the second 480oC. Condensation occurs at 0.4111 Mpa. Calculate W,ec, and ee.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter28: Special Refrigeration Applications

Section: Chapter Questions

Problem 15RQ: Why is two-stage compression popular for extra-low-temperature refrigeration systems?

See similar textbooks

Similar questions

A Steam Power Plant operates on the Rankine Cycle in which steam at 22 bar and dryness fraction of 0.95 enters the turbine and exhausts to a pressure of 0.1 bar in acondenser. The condensate is pumped as feedwater to the Boiler in which the steam is generated. Sketch the T-s diagram for this cycle and calculate the following performance parameters:(i) Cycle Thermal Efficiency(ii) Specific Steam Consumption(iii) Condenser Heat Load(iv) Cooling Water mass and volumetric flow rates for the condenser if the cooling water enters at 26 oC and leaves at 40 oC for a net power output of 24,000 kW. The specific heat capacity of the cooling water can be taken as 4.0 kJ/kg K and its density as 1023 kg/m3.
A reheat cycle with two stages of reheating is executed, with steam expanding initially from 90 bar and 530°C. The two reheater pressures are 10 bar and 0.6 bar, and the steam leaves each reheater at 480°C. Condensation occurs at 0.03 bar. What is the steam flow rate in kg/s for an engine output of 20,000 kW?
A steam power plant operates on the simple ideal Rankine cycle. Steam enters the turbine at 4 MPa, 500 degrees celcius and is condensed in the condenser at a temperature of 40 degrees celcius. draw and label the schematic diagram and the pV and TS planes. (a) Show the cycle on a T-s diagram. If the mass flow rate is 10 kg/s, determine (b) the thermal efficiency of the cycle (c) the net power output in MW.
Steam enters the turbine of a steam power plant, operating on Rankine cycle, at 10 bar, 300oC. The condenser pressure is 0.1 bar. The steam leaving the turbine is 90% dry. Calculate the adiabatic efficiency of the turbine and the cycle efficiency. Also, draw a suitable h-s diagram. Neglecting pump work
A reheat cycle with two stages of reheating is executed, with steam expanding initially from 202.65 and 540 deg. C. The two reheater pressures are 40 bar and 10 bar, and steam leaves each reheater at 540 deg. C. Condensation occurs at 60 deg. C. Sketch the Ts - diagram. For an ideal cycle, find Qa and e. For the engine operating between the same conditions compute W and e. For a 362, 500 kg/h steam and 100 MW generator output at 94% efficiency, for actual engine, find combined thermal efficiency and combined heat rate and combined engine efficiency and quality of the actual exhaust steam. (3 decimal places in final answer pls)
A 900-MW supercritical single-reheat steam power plant operates with the main (live) steam condition of 250 bars and 560°C and the condenser pressure of 0.04 bar. The steam is reheated at a pressure of 30 bars to a temperature of 560°C. The turbine isentropic efficiency is 0.92. The feed pump work consumption may be ignored. Calculate: (a) the plant net specific work, (b) the plant thermal efficiency, (c) the plant steam flow rate, and (d) the plant heat rate.
In a Reheat Cycle steam enters the turbine @ 40 bar and 400 C. It expands isentropic ally to 6 bar and is reheated at constant pressure to 400 C. This steam expanded isentropic ally to 1 bar and is reheated at constant pressure to 200 C. Finally this steam is expanded isentropic ally in the condenser pressure of 0.1 bar. Determine the thermal efficiency and the capacity of the boiler if 10,000 KW of power output is required.
1. In a Rankine cycle, steam enters the turbine at 2.5 MPa and condenser of 50 kPa.What is the thermal efficiency of the cycle? 2. Steam enters the superheater of a boiler at a pressure of 25 bar and dryness of 0.98 and leaves at the same pressure at a temperature of 370OC. Calculate the heat energy supplied per kg of steam supplied in the superheater. Kindly answer question 1 and 2 and show solution. Please help me. Thank you
A steam power plant operates on the simple ideal Rankine cycle. The steam enters the turbine at 4 MPa and 500°C and is condensed in the condenser at a temperature of 40°C. draw and label the schematic diagram and the pV and TS planes. (a) Show the cycle on a T-s diagram. If the mass flow rate is 10 kg/s, determine (b) the thermal efficiency of the cycle (c) the net power output in kW.
PROBLEM: A reheat cycle with two stages of reheating is executed with steam expanding initially from 200 bar (20 Mpaa) and 540 deg C. The 2 reheater pressures are 40 bar (4 Mpaa) and 10 bar (1 Mpaa) and the steam leaves each reheater at 540 deg C. Steam is bled in between two reheating sessions at a pressure equal to 20 and 15 bars into 2 open feedwater heaters with the aforementioned operating pressures. Condensation occurs at 60 deg C. All expansion and compression efficiencies are 90%. For 10 Kg/sec of working substance circulated, answer the following, and fill up the blanks in the items below: 1. Equipment and TS diagram with the cycle.2. Actual mass of steam bled into the open heaters (kg/kg) = a) ___________________ b) __________________3. Ideal turbine work in KW. Answer:
PROBLEM: A reheat cycle with two stages of reheating is executed with steam expanding initially from 200 bar (20 Mpaa) and 540 deg C. The 2 reheater pressures are 40 bar (4 Mpaa) and 10 bar (1 Mpaa) and the steam leaves each reheater at 540 deg C. Steam is bled in between two reheating sessions at a pressure equal to 20 and 15 bars into 2 open feedwater heaters with the aforementioned operating pressures. Condensation occurs at 60 deg C. All expansion and compression efficiencies are 90%. For 10 Kg/sec of working substance circulated, answer the following, and fill up the blanks in the items below: 7. Actual Heat Added (KW). Answer: _____________8. Actual Rankine cycle efficiency % Answer: ___________________9. If the generator efficiency = 95%, and negligible turbine bearing friction loss, what is the brake work in KW? Answer: ____________
Steam enters the turbine of a power plant operating on the Rankine cycle (Fig. 2) at 873.15 Kand exhausts at 30 kPa. To show the effect of boiler pressure on the performance of the cycle,calculate the thermal efficiency of the cycle and the quality of the exhaust steam from theturbine for boiler pressures of 5000,7500, and 10 000 kPa. #Chemical Engineering #Chemical #Thermodynamics