A reinforced concrete slab 3 m square and 8.5 in thick is lifted by four cables attached to the corners. The cables are attached to the hook at a point 6 ft from the bottom of the slab. Determine the smallest diameter of the cables if the axial stress is limited to 30 ksi. Concrete slab weighs 160 lb/ft³. cables slab

A reinforced concrete slab 3 m square and 8.5 in thick is lifted by four cables attached to the corners. The cables are attached to the hook at a point 6 ft from the bottom of the slab. Determine the smallest diameter of the cables if the axial stress is limited to 30 ksi. Concrete slab weighs 160 lb/ft³. cables slab

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A pressurized spherical tank is made of 0.5-in.-thick steel. If it is subjected to an internal pressure of p = 200 psi, determine its outer radius if the maximumnormal stress is not to exceed 15 ksi.
Determine the stress (in psi) in member AB if the cross-sectional area of the BD is 1.90 in2 P = 1726 lb, x = 16.13 in, y = 12.8 in, and z = 10.7 in. Round off the final answer to three decimal places.
Determine the stress (in psi) in member BD if the cross-sectional area of the BD is 2.46 in2 P = 1495 lb, x = 16.5 in, y = 9.6 in, and z = 10.9 in. Round off the final answer to three decimal places.
A cylinder having an internal diameter of 20 in and an external diameter of 36 in is subjected to an internal pressure of 10000 psi and an external pressure of 2500 psi. Determine the hoop stress at the inner surface of the cylinder in psi.
A pressurized spherical tank is to be made of 12-mm-thick steel. If it is subjected to an internal pressure of p = 1.4 MPa, determine its outer radius if the maximum normal stress is not to exceed 105 MPa.
Determine the maximum normal stress (in Mpa) in bar ABCD if the cross-sectional area of the bar is A = 556 mm2 and P= 36.79 kN. Round off the final answer to four decimal places.
The cross-sectional area of bar ABCD is 600 mm2. Determine the maximum normal stress in the bar.
Determine the normal stress in a basketball of 9.5-in. outer diameter and 0.125-in. wall thickness that is inflated to a gage pressure of 9 psi.
A basketball has a 300-mm outer diameter and a 3-mm wall thickness. Determine the normal stress in the wall when the basketball is inflated to a 120-kPa gage pressure.
2. The puncher is to drive a 25 mm diameter hole to a steel plate. If the allowable axial stress of the puncher is limited to 101.85 MPa, determine the thickness (t) of the steel plate. The maximum shear stress of the steel plate is 50MPa.
The state of stress at a point in a member is shown on the rectangular stress element where the magnitudes of the stresses are |σx|=11 ksi, |σy|=31 ksi, and |τxy|=17 ksi. Determine the state of stress on an element rotated 50∘ counterclockwise from the element shown.
A cylindrical propane tank has an outside diameter of 3.25 m. If the allowable hoop stress is 100 MPa and the allowable axial or longitudinal stress is 45 MPa, determine the minimum thickness of the pipe when the internal pressure that can be applied to the tank is 1.25 MPa.