A rig is to be constructed, which will consist of a 10m long elastic beam, simply supported at both ends, as shown in Figure 1. The first simply supported beam is subjected to the concentrated loads and the second beam is subjected to the distribution and point loads. Determine the distribution of shear force. Calculate the bending moments, due to bending in the simply supported beam.

A rig is to be constructed, which will consist of a 10m long elastic beam, simply supported at both ends, as shown in Figure 1. The first simply supported beam is subjected to the concentrated loads and the second beam is subjected to the distribution and point loads. Determine the distribution of shear force. Calculate the bending moments, due to bending in the simply supported beam.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter6: Stresses In Beams (advanced Topics)

Section: Chapter Questions

Problem 6.2.15P: -15 A composite beam is constructed froma wood beam (3 in. x 6 in.) and a steel plate (3 in, wide)....

See similar textbooks

Similar questions

strength of materials Derive the formula for the maximum shear and maximum bending moments for Case 7.
Applying the flexure formula, how can we determine the position of the absolute maximum bending stress that occur?
Determine the support reactions and Shear force and Bending moment diagram and also determine the point of maximuym shear and Bending moment and their values
Derive the equations for shear force and bending moment
Answer the following questions: 1. Describe the difference between Deflecion and Shear force. 2. Describe bending of beam and give example. 3. Describe shear force and bending moment diagram below
Considering only pure bending, determine the minimum section modulus for the component and loads shown. Assume ?? of 36,000 psi and a factor of safety of 1.67. (Hint: the part does not have to exceed the allowable stress) Do not forget to draw and calculate the diagram of shear force and bending moment The distances in the beam are in feet. The value of the load P1 and P4 is 2 kips. The value of the loads P2 and P3 is 6 kips
Mechanical principles A rig is to be constructed, which will consist of a 10m long elastic beam, simply supported at both ends, as shown in Figure 1. The first simply supported beam is subjected to the concentrated loads and the second beam is subjected to the distribution and point loads. Determine the distribution of shear force. Calculate the bending moments, due to bending in the simply supported beam.
The same rectangular cross-section beam in Q2b is subjected to a maximum bending moment of 25,000 Nm and experiences sagging. Assuming that the centroidal axis passes through the beam section at (d/2), calculate the maximum bending stress (?max) the beam will experience. Give your answer in N/mm2 and to 2 decimal places.
The diameter of the cross section of the beam is increased, explain its effect on maximum bending stress and justify the answer
The beam will fail if the maximum bending moment reaches 900 Nm or the maximum shear force becomes 2500 N. Is the beam safe and why?
Define the shear and bending-moment diagrams.
So first Draw the free body diagram Then second Find the Reactions Lastly Draw the Shear and Moment Diagram (Please no hand writing solution for other wise down vote,)