Plz help me A simply supported beam of span 4 m carries a concentrated load Pin kN-acting downward at distance 1.5 m from the left support as shown in figure. Determine the mavivalue of load that can be allowed on beam if permissible stresses in tension and compressio0 are40 MPa and 30 MPa respectively. The cross-section of beam is shown in figure.60 mm20 mm1P20 mm1.5 m-4 m20 mm100 mm100mm

Answered: Image /qna-images/answer/9af54bbe-8cd6-461e-9945-bdeab960129b.jpg

A simply supported beam of span 4 m carries a concentrated load Pin kN acting downward at distance 1.5 m from the left support as shown in figure. Determine the mavie value of load that can be allowed on beam if permissible stresses in tension and compression 40 MPa and 30 MPa respectively. The cross-section of beam is shown in figure. 60 mm - 20 mm P 20 mm 1.5 m- A 4 m 20 mm 100 mm 100 mm

A simply supported beam of span 4 m carries a concentrated load Pin kN acting downward at distance 1.5 m from the left support as shown in figure. Determine the mavie value of load that can be allowed on beam if permissible stresses in tension and compression 40 MPa and 30 MPa respectively. The cross-section of beam is shown in figure. 60 mm - 20 mm P 20 mm 1.5 m- A 4 m 20 mm 100 mm 100 mm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Determine the maximum tensile stress and maximum compressive stress due to the load P acting on the simple beam AB (see figure). Data are as follows: P= 5.4 kN L=3.0 m d=1.2 m b=75 mm t_=25 mm h=100 mm h1=75 mm c1=62.5 mm c2=37.5 mm, and l= 3.3203x10⁶ mm⁴
a simply supported beam is carrying a varying load and a uniform load as shown in the figure. If the beam properties are given below, what is the final stress at bottom of beam section at a distance 2.47m from the right support where the totall losses of the prestressing force is 24% mpa beam wid=217mm height= 480mm varying load= 9.67kn/m uniform load = 4.27 kn/m x = 3.32 y = 5.95 Prestressing force = 429kn eccentricity = 95mm
A vertical load P = 800 lb applied to the tripod shown in the figure, causes a compressive force of 256 lb in leg AB and a compressive force of 283 lb in leg AC. Determine the force in leg AD and the coordinates xD and zD of its lower D.
length=7m height=250mm UDL on the beam=38.5KN/M d=812mm Mass of the beam=65.9kg/m a. Consider design loads( udl+self weight) b. Calculate and draw the Bending Moment Diagram (BDM).What is the value of the maximum bending moment? c. Calculate and draw the Shear Force Diagram (SFD).What is the value of the maximum shear force? d. Using the table, calculate the maximumdeflection of the beam.
Consider the beam shown in (Figure 1). Suppose that M= 9 kip⋅ft, P= 6 kip, w = 1.2 kip/ft, and point D is located just to the left of the 6-kip load. Follow the sign convention. Part D Part complete Determine the internal normal force at section passing through point E. Express your answer to three significant figures and include the appropriate units. Part E Determine the internal shear force at section passing through point E. Express your answer to three significant figures and include the appropriate units. Part F Determine the internal moment at section passing through point E. Express your answer to three significant figures and include the appropriate units.
A steel beam with length L = 400 mm and transverse dimensions b = 12 mm and h = 50 mm (see the figure) supports a uniform load with intensity q = 45kN/m which includes the weight of the beam. Calculate the shear stresses in the beam (at the maximum shear cross section). at points located 6.25 mm, 12.5 mm, 18.75 mm and 25 mm from the top surface of the beam. From these calculations, make a graph showing the distribution of shear stresses from the top to the bottom of the beam.
For the beam shown in the figure, the allowable bearing stress for the material under the supports at A and B is σb = 900 psi. Assume that w = 2,000 lb/ft, P = 4,500 lb, a = 20 ft, and b = 8 ft. Determine the size of square bearing plates (A and B) required to support the loading shown.
As shown in the figure below, determine the internal loadings at points A,B and. Consider the uniform weight of the whole structure which is 77 lbs per ft. FN= 87 OR 87X10 = 870
A beam with length L is FIXED at both ends. It is loaded with a concentrated force P at L/3 from the first support. (a) Draw the Loading Diagram. (b) Determine the deflection at midspan, EI is constant. (c) If the beam is made of steel, what is its elastic modulus? (d) If the beam has a length of 10 meters, cross section of 200x200mm, and force P is 10 kN, what is the deflection at midspan (in millimeters)?
As shown in the figure below, a cantilever beam has a span of 6m long. And it is subjected to a concentrated load 6kN acting 4m from the support and a clockwise moment of 30kN.m at the free end. E = 200 GPa and I = 100,000,000 ??^4 . (Use area moment method) a) Determine the deflection at the free end due to concentrated load only. b) Determine the maximum deflection at the free end.
Steel bar having a rectangular cross section 15mmx20mm and 11 m long is suspended vertically from one end. The steel has a unit mass of 7850 kg/cu.m. and E=200GPa. If the load of 20kN is suspended at the other end of the rod, determine the total elongation of the rod.
Calculate the maximum shear stress tmax the maximum bending stress emax in a wood beam (see figure) carrying a uniform load of 22.5 kN/m (which includes the weight of the beam) if the length is 1.95 m and the cross-section is rectangular with a width of 150 mm and height 300 mm, and the beam is either (a) simply supported as in the figure part a, the or b has sliding support at right as in the figure part b.