A single phase 11 kV line with a length of 15 km is to transmit 500 kVA. The inductive reactance of the line is 0.5 Ω/km and the resistance is 0.3 Ω/km. Calculate the efficiency and regulation of the line for .8 lagging power factor.

A single phase 11 kV line with a length of 15 km is to transmit 500 kVA. The inductive reactance of the line is 0.5 Ω/km and the resistance is 0.3 Ω/km. Calculate the efficiency and regulation of the line for .8 lagging power factor.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.13P: A single-phase overhead transmission line consists of two solid aluminum conductors having a radius...

See similar textbooks

Related questions

Q: estimate the distance over which the load of 15000 KW at 0.85 power factor can be delivered by a…

A: Given information: The value of the line current is determined as follows:

Q: (e) A 3-phase double circuit line is shown in the given figure. The diameter of each conductor is 2…

A: In this question, Determine the capacitance and chargeing current? We know Charging current I=…

Q: A single phase transmission line is delivering 470 kVA load at 12 kV. Its resistance is 7Q and…

Q: Taking the dielectric strength of air to be 30 kV/cm, calculate the disruptive critical voltage for…

A: As per our policy i have attempted only one Given data: d=400 cmδ=1go=30 kV/cm(peak)=302rmsr=1 cmm=1…

Q: 2. Taking the dielectric strength of air to be 30 kV/cm, calculate the disruptive critical voltage…

A: The solution can be achieved as follows.

Q: A single phase transmission line is delivering 490 kVA load at 12 kV. Its resistance is 6 N and…

A: This question belongs to power system . It is based on the concept of sending end and receiving end…

Q: 5. A 3-phase line 3 km long delivers 3000 kW at a p.f. 0-8 lagging to a load. The resistance and…

A: As per Bartleby guidelines we are allowed to solve only one question, please asks the rest again.…

Q: A single phase transmission line has two parallel conductors 6 m apart, the ra dius of each…

A: We have an single phase transmission line which has two parallel conductor and given data as,…

Q: 1. A single phase overhead transmission line delivers 4000 kW at 11 kV at 0-8 p.f. lagging. If…

A: Given: The load delivered by the line is 4000kw The load voltage is 11kv The load power factor =0.8…

Q: À three phase 220KV, 50HZ transmission line supplies a power of 100MW at a power factor of 0.8 lag…

Q: a single phase overhead transmission line delivers 4000k w at 11 kV at 0.8 pf lagging. If resistance…

A: First we will calculate receiving end current from given values, using formula we will find sending…

Q: vii. RCC poles... R... .C... . used to support transmission tower ix. Calculate charring current per…

A: We are authorized to answer one question at a time, since you have not mentioned which question you…

Q: Question 1) A 154 kV transmission line has a length of 100 km. The line and the conductors are given…

A: Concept: In bundled conductors, GMD and GMR increased, reducing inductance hence decreases inductive…

Q: Parameters of Line transmission representations. Capacitance. Find the capacitance and capacitive…

A: The solution can be achieved as follows.

Q: The inductive reactance of the line conductor is 64 Ω per km, then the inductance of the conductor…

Q: 13 A single-phase overhead transmission line consists of two solid alumi- num conductors having a…

A: We will find out the inductance per unit length for details then we will find out impedance per km…

Q: 470 kVA load at 12 kV. Its resistance is 7 Ω and inductive reactance is 7 Ω if the load power factor…

A: As we have given: S=470 KVAV=12 KVR=7 ΩXL=7 ΩP.F.R=0.9

Q: Question 1) A 154 kV transmission line has a length of 100 km. The line and the conductors are given…

Q: A Three-Phase, 131 KV, 50 Hz Transmission Line consists of 2.4 cm radius conductors spaced at 2.8 m…

A: A Three-Phase, 131 KV, 50 Hz Transmission Line consists of 2.4 cm radius conductors spaced at 2.8 m…

Q: A single-phase overhead transmission line consists of two solid aluminum conductors having a radius…

A: Line inductance is given by LT=4×10-7lnDr' H/m Here, D represents the spacing between the conductor…

Q: Problem: A three phase transmission line is being supported by 3 disc insulators. The potential…

Q: 22 A three-phase, 60-Hz transmission line is 100 mi long and has flat horizon pacing. Each phase…

Q: The span between two level supports for a 132 KV overhead transmission line is 200 The weight of…

A: According to question: Total weight of 1m length of conductor is calculated as…

Q: In the power system whose single line diagram is shown below, the line cross section is 95 mm2, the…

A: we are assuming load voltage KVA and kW ratings are with reference to supply voltage of 10 kV and we…

Q: 3. A single-phase transmission line has two parallel conductors 3.2 meters apart, radius of each…

Q: The capacitance between the line to neutral of a three-phase 50 Hz, 66KV overhead line conductors…

A: In this question, line to neutral capacitance is given for horizontal configuration..We have to find…

Q: A three-phase 60-hz transmission line has its conductors arranged in a triangular formation so that…

A: The diameter of ACSR Rook is given as 0.977 inc The capacitance to neutral is given as Cn=2πk0lnDr…

Q: A transposed overhead transmission line has self-reactance (X;) and mutual reactance (Xm) as 0.5…

A: Given, A transposed overhead transmission line has, Self reactance, Xs=0.5 ohmkm Mutual reactance,…

Q: The inductive reactance of the line conductor is 67 2 per km, then the inductance of the conductor…

Q: The capacitance between the line to neutral of a three-phase 50 Hz, 66KV overhead line conductors…

A: Capacitance between line to neutral i.e. phase capacitance is 7.4*10-7Farad/m Now in a 3-phase…

Q: (k) Determine the economical cross-sectional for a single phase transmission line, 1 km transmission…

A: For the 3 phase transmission line of 1 km and a voltage of 110 kV. Thus, the load cycle is, 6 hr 20…

Q: The capacitance between the line to neutral of a three-phase 50 Hz, 66KV overhead line conductors…

A: Find the capacitive reactance of transmission line? If capacitance c = 7.7×10-7 F/ph/m…

Q: The spacing for a 3-phase horizontally spaced line operating at 50 Hz, 132 kV, is 1.6 m between…

Q: 3. A single-phase transmission line has two parallel conductors 3.2 meters apart, radius of each…

Q: The annual load duration curve of a power supply system may be considered as straight line from 40…

A: Given: The annual load duration curve of a power supply system may be considered as straight line…

Q: A single-phase transmission line consisting of two conductors, the radius of each conductor is 0.4…

Q: A single-phase transmission line has two parallel conductors 3.2 meters apart, radius of each…

Q: The inductive reactance of the line conductor is 68 2 per km, then the inductance of the conductor…

Q: A hypothetical case: A power station generates 50MVA at a voltage of 18.5kV (3-phase, 50HZ). This…

A: A power station generates 50 MVA at a voltage of 18.5 kV (3-phase, 50 Hz). This power must be…

Q: Example 4 : Determine the efficiency and regulation of a 3-phase, 100 km, 50 Hz transmission line…

Q: The capacitance between the line to neutral of a three-phase 50 Hz, 66KV overhead line conductors…

A: Capacitance between line to neutral C= 8.5×10-7 F/ph/m Frequency f= 50Hz Reactance Xc ?

Q: A 230 kV transmission line has an impedance of 50 cis 78 ohms and a capacitive reactance of 1,200…

Q: Question 1) A 154 kV transmission line has a length of 100 km. The line and the conductors are given…

Q: 4. A 3-phase overhead transmission line has its conductors arranged at the corners of an equilateral…

A: In this question , we will find capacitance of line per km..

Q: A three-phase 60-Hz transmission line has its conductors arranged in a triangular formation so that…

A: Given data, D12=D23=25 ft.D12=D23=762 cmD31=42 ftD31=1280.16 cm The approxmiate the diameter of the…

Q: the air-filled two-wire line has a characteristic impedance of 50 Ω and is operated at f = 3GHz…

A: The normalized load impedance is given by ZNL=100+j4050=2+j0.8 In smith chart the intersection point…

Q: a single phase 11 KV line with the length of 15 kilometre is to transmit 500kva the inductive…

A: Assuming the power factor to be 0.8 lagging because it seems that there is a typo while mentioning…

Concept explainers

Single Phase AC Circuit

Alternating Current (AC) is a type of electric power in which the electric current changes, both in magnitude and direction, at regular intervals. This AC Circuits can deliver power in either a Single Phase system or a Three Phase system.

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step by step

Solved in 5 steps with 11 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Analysis of Single Phase and Three Phase System

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A single-phase overhead transmission line consists of two solid aluminum conductors having a radius of 3 cm with a spacing 3.5 m between centers. (a) Determine the total line inductance in mH/m. (b) Given the operating frequency to be 60 Hz, find the total inductive reactance of the line in /km and in/mi. (c) If the spacing is doubled to 7 m, how does the reactance change?
A small manufacturing plant is located 2 km down a transmission line, which has a series reactance of 0.5/km. The line resistance is negligible. The line voltage at the plant is 4800V(rms). and the plant consumes 120kW at 0.85 power factor lagging. Determine the voltage and power factor at the sending end of the transmission line by using (a) a complex power approach and (b) a circuit analysis approach.
Find the inductive reactance per mile of a single-phase overhead transmission line operating at 60 Hz given the conductors to be Partridge and the spacing between centers to be 30 ft.
A 40-km, 220-kV, 60-Hz, three-phase overhead transmission line has a per-phase resistance of 0.15/km, a per-phase inductance of 1.3263 mH/km, and negligible shunt capacitance. Using the short line model, find the sending-end voltage, voltage regulation, sending-end power, and transmission line efficiency when the line is supplying a three-phase load of (a) 381 MVA at 0.8 power factor lagging and at 220 kV and (b) 381 MVA at 0.8 power factor leading and at 220 kV.
If the per-phase line loss in a 70-km-long transmission line is not to exceed 65 kW while it is delivering 100 A per phase, compute the required conductor diameter if the resistivity of the conductor material is 1.72108-m.
A 60-Hz, single-phase two-wire overhead line has solid cylindrical copper conductors with a 1.5 cm diameter. The conductors are arranged in a horizontal configuration with 0.5 m spacing. Calculate in mH/km (a) the inductance of each conductor due to internal flux linkages only, (b) the inductance of each conductor due to both internal and external flux linkages, and (c) the total inductance of the line.
Calculate the capacitance-to-neutral in F/m and the admittance-to-neutral in S/km for the three-phase line in Problem 4.18. Also calculate the line-charging current in kA/phase if the line is 110 km in length and is operated at 230 kV. Neglect the effect of the earth plane.
Calculate the inductive reactance in /km of a bundled 500-kV, 60-Hz, three-phase completely transposed overhead line having three ACSR 1 113 kcmil conductors per bundle, with 0.5 m between conductors in the bundle. The horizontal phase spacings between bundle centers are 10, 10, and 20 m.
Transmission line conductance is usually neglected in power system studies. True False
A balanced three-phase load is connected to a 4.16-kV, three-phase, fourwire, grounded-wye dedicated distribution feeder. The load can be mode led by an impedance of ZL=(4.7+j9)/phase, wye-connected. The impedance of the phase conductors is (0.3+j1). Determine the following by using the phase A to neutral voltage as a reference and assume positive phase sequence: (a) Line currents for phases A, B, and C. (b) Line-to-neutral voltages for all three phases at the load. (c) Apparent. active, and reactive power dissipated per phase, and for all three phases in the load. (d) Active power losses per phase and for all three phases in the phase conductors.
Consider a long radial line terminated in its characteristic impedance Zc. Determine the following: (a) V1/I1, known as the driving point impedance. (b) | V2 |/V1|, known as the voltage gain, in terms of al. (c) | I2 |/| I1 |, known as the current gain, in terms of al. (d) The complex power gain, S21/S12, in terms of al. (e) The real power efficiency, (P21/P12)=, terms of al. Note: 1 refers to sending end and 2 refers to receiving end. (S21) is the complex power received at 2; S12 is sent from 1.
PowerWorid Simulator case Problem 3_60 duplicates Example 3.13 except that a resistance term of 0.06 per unit has been added to the transformer and 0.05 per unit to the transmission line. Since the system is no longer lossless, a field showing the real power losses has also been added to the oneline. With the LTC tap fixed at 1.05, plot the real power losses as the phase shift angle is varied from 10 to +10 degrees. What value of phase shift minimizes the system losses?