A single plate clutch transmits 25 kW at 900 rpm. The maximum pressure intensity is 85 kN/m. The outer diameter of plate is 360 mm with both sides effective and coefficient of friction 0.25. find the inner diameter of plate.

A single plate clutch transmits 25 kW at 900 rpm. The maximum pressure intensity is 85 kN/m. The outer diameter of plate is 360 mm with both sides effective and coefficient of friction 0.25. find the inner diameter of plate.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: 3.A multiple disc clutch has three discs on the driving shaft and two on the driven shaft, providing…

A: Answer: The maximum axial intensity of pressure between the discs: 0.12665 MPa.

Q: 5. A plate clutch consists of a flat driven plate gripped between a driving plate and presser plate…

Q: A car engine has its rated output of 120 kW. The maxdmum - torque developed is 110 Nm, The clutch…

A: Answer: ◆ The dimensions of the friction plate are: Outer radius : ro = 133.75 mm and inner radius :…

Q: A flat belt drive connects two pulleys 5 meters apart. The 2m pulley diameter driver rotates at…

Q: Find the power transmitted by a belt running over a pulley of 600 mm diameter at 200 r.p.m. The…

A: Power transmitted by the belt, P=(T1-T2)V Maximum tension in the belt, Tmax=2500N Diameter of the…

Q: Q4) A multi-disc clutch is constituted of 8 discs, the outer diameter of the contact surface is 150…

Q: A cone clutch has cone elements at an angle of 12o . The clutch transmit 25 HP at a speed of 1200…

A: Answer: The axial force needs to engage the church is 258.04 lbf.

Q: A multiple disc clutch transmits 55 kW of power at 1800 r.p.m. The coefficient of friction is 0.1…

Q: 1- A single plate clutch with both sides of the plate effective is required to transmit 25 kw at…

A: Given:P=25 kWN=1600 rpmRo=3002=150 mmP=0.07 N/mm2μ=0.3

Q: A simple band brake has a 76 cm drum and fitted with a steel band 2/5 cm thick lined with a bake…

Q: A multiplate clutch has three pairs of contact surfaces. The outer and inner radii of the contact…

A: Given:Number of pairs=3Speed,N=1500rpmOuter radius,r1=100mm=0.1mInner…

Q: A multi-plate clutch has four pairs of frictional surfaces, each of internal diameter 120 mm and…

A: Clutch is defined as a machine element which is used to engage and disengage driver and driven shaft…

Q: A fan is driven by a belt from a motor which runs at 880 rpm. A medium double ply leather belt 5/16…

A: Calculate the tight side tension in the belt. T1=σallowbt=350 psi10 in×516 in=1093.75 lb

Q: A single disc clutch with both sides effective is required for a vehicle. The power for initial…

A: Given data: Power, P = 100 kW N = 4000 rpm Coefficient of friction, µ = 0.35 Maximum pressure, Pmax…

Q: A cone clutch is to transmit 10 KW at 600 r.p.m. the cone has a face angle of 10◦ The width of the…

A: Given data: The power transmitted by cone clutch is P = 10 kW = (10x103) WThe face angle of the cone…

Q: An industrial fan running at 600 rpm is driven by a 25kW, 960rpm, induction motor using an open belt…

Q: A single disc clutch is used to transmit 12kW power at 1000rpm. The axial pressure is limited to…

Q: Q. A multi plate clutch of alternate bronze and steel plates having effective diameters of 20 cm and…

A: The solution is given below

Q: Q3/A multi – plate clutch is to transmit 12 kW at 1500 r.p.m. The inner and outer radii for the…

A: We are suppose to solve only 3 subparts. Please post other parts as a separate question.

Q: Q5: Find the relation between the two theories of clutch design regarding transmitted torque using…

A: Two theories of clutch, 1. Uniform pressure theory 2. Uniform wear theory Load, F=1.5KN Pressure, P…

Q: Q. A multi disc clutch has 5 plates having four pairs Myd of active friction surfaces. If the…

A: The solution is given in next step

Q: In an open flat belt drive, a pulley of 800 mm diameter runs at 300 r.p.m. The coefficient of…

Q: A flat open belt drive is used to transmit a power of 22 kW from a motor shaft rotating at 950 rpm.…

Q: termine the size of the clutch plate suitable for an Ambassador car employing a single plate type…

A: we will use uniform pressure theory

Q: A single plate friction clutch with both sides of plate being effective is used to transmit power at…

Q: A cone clutch is to transmit 10 KW at 600 r.p.m. the cone has a face angle of 10◦ The width of the…

A: Given data:

Q: Question 3: A single plate clutch with both sides of the plate effective is required to transmit 25…

Q: Q) A multiple clutch has three pairs of contact surfaces. The outer and inner radii of the contact…

A: The solution is

Q: A multi-disk clutch consists of two steel disks with one bronze disk. The inner and outer diameters…

A: For uniform wear theory, Pmax=CRi where, C is the constant Pmax is the maximum pressure on the…

Q: Q3 /A multi – plate clutch is to transmit 12 kW at 1500 r.p.m. The inner and outer radii for the…

Q: (9) A dog clutch as shown has four equal jaws. The coupling material properties are: - shearing…

A: Given: The shearing strength, τ = 240 MPa The ultimate compressive strength, σc = 670 MPa The…

Q: A multiplate disc clutch consist of a branz plate to transmit 10 kw at 1000 rpm di= 90 mm do= 160 mm…

A: Given Power, P = 10 kw di= 90 mm do= 160 mm Friction coefficient…

Q: 2. A single plate clutch with both sides of the plate effective is required to transmit( 25 kW) at…

Q: The coefficient of friction of a disk clutch with two pairs of contact surfaces is 0.25. The maximum…

Q: A cone clutch is to transmit 7.5 kW at 900 rpm. The cone has a face angle of 12o. The width of the…

Q: A multi disc clutch has five plates having four pairs of active friction surfaces. If the intensity…

Q: Two parallel shafts 5 m apart are connected by open flat belt drive. The diameter of the bigger…

Q: Q3/A multi – plate clutch is to transmit 12 kW at 1500 r.p.m. The inner and outer radii for the…

A: Step by step solution is given below.

Q: Find the relation between the two theories of clutch design regarding transmitted torque using the…

Q: Single-plate clutch and spring design of Automotive. Engine Specifications: Power 17.5 KW, Speed is…

A: Given: Power = 17.5 kW Speed = 1000 rpm Shear stress = 40 MPa

Q: A)It is required to use a multiplate clutch to transmit power of 24 kW at 1200 r.p.m If the clutch…

Q: A multiplate disc clutch transmits 75 kW of power at 2000 rpm. Coefficient of friction for the…

A: Given Data, Power transmitted by clutch, P=75 kW=75×103 watt Speed of clutch, N=2000 rpm…

Q: mm. The semi-angle of the cone is 15°. The coefficient of friction is 0.3. Find the torque required…

Q: A 600 mm steel pulley transmits 50 kW at 900 rpm. The arc of contact between the belt and pulley is…

Q: A V-belt drive system transmits 100 kW at 475 r.p.m. The belt has a mass of 0.6 kg/m. The maximum…

A: We have to determine minimum number of belts and pulley diameter

Q: 4. A friction clutch is required to transmit 34-5 kW at 2000 rev/min. It is to be of single-plate…

A: Write the expression for torque in friction clutch of uniform wear theory.

Q: Q. A multiplate clutch has three pairs of contact surfaces. The outer and inner radii of the contact…

A: The answer is

Q: A multiplate disc clutch has 6 active friction surfaces. power transmitted is 20 kW at 400 rpm.…

A: Given that, Number of pairs in contact, n=6 Power transmitted, P=20 kW=20×103 Speed of clutch, N=400…

Q: ...A plate clutch with single driving plate with contact surfaces on each is required to transmit 35…

A: Answer: The inside radius of the frictional surface: 110.7582 mm

Q: A single plate friction clutch with both sides of plate being effective is used to transmit power…

A: Clutches are defined as the machine element which is used to engage or disengage driver and the…

Concept explainers

Clutches, Brakes, Couplings, and Flywheels

The clutch is described as a machine element used to connect or disconnect two shafts together to transmit torque or power. The clutch works on the principles of friction. The clutch is commonly used in automobiles to transfer power from the driving shaft to the driven shaft.

Question

A single plate clutch transmits 25 kW at 900 rpm. The
maximum pressure intensity is 85 kN/m. The outer diameter
of plate is 360 mm with both sides effective and coefficient of
friction 0.25, find the inner diameter of plate.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Clutches, Brakes, Couplings and Flywheels

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A local utility vehicle production company have considered using in one of its design a multi-disc clutch consisting of a 9 steel disc and 8-bronze discs with effective outside and inside diameter of 220mm and 160mm, respectively. If the shaft turns at 150rpm and an axial force of 600N is applied, find the horsepower capacity, considering a coefficient of friction of 0.25
Q 4. A cone clutch using semirigid molded asbestos has D = 12 in, d = 11 in, a cone length of 2.23 in, s. A torque of 1.8 kip in is to be transmitted. For this requirement, estimate the actuating force and pressure by both models
A multiplate disc clutch consist of a branz plate to transmit 10 kw at 1000 rpm di= 90 mm do= 160 mm friction coefficient =0.18 and the pressure is 0.3. find the number of contact surfaces.
A band clutch has an angle of contact of 260 degrees on a 16 in diameter drum The rotational speed of the drum is 260 rpm and the clutch transmit 10 hp. The band is 1/16 - in. thick and has a designstress of 4800 psi. How wide should the band be?
A plate clutch has 3 discs on the driving shaft and 2 discs on the driven shaft, providing four pairs of contact surfaces. The outside diameter of the contact surfaces is 240 mm and inside diameter 120 mm. Assuming uniform pressure and coeff. Of friction is 0.3. Find the total spring load pressing the plates together to transmit 23kw power at 1475 revolution per minute. If there 6 springs each of stiffness 13 kN/m and each of the contact surfaces has worn away by 1.25 mm. find the maximum power that can be transmitted assuming uniform wear. A plate clutch has 3 discs on the driving shaft and 2 discs on the driven shaft, providing four pairs of contact surfaces. The outside diameter of the contact surfaces is 240 mm and inside diameter 120 mm. Assuming uniform pressure and coeff. Of friction is 0.3. Find the total spring load pressing the plates together to transmit 23kw power at 1475 revolution per minute. If there 6 springs each of stiffness 13 kN/m and each of the contact surfaces…
The coefficient of friction of a disk clutch with two pairs of contact surfaces is 0.25. The maximum pressure under working conditions is 220kPa only. The clutch is used to connect two 25mm solid shafts with allowable shearing stress of 69 MPa. The inner and outer diameter of the clutch face is 60 mm and 120mm, respectively. What is the power in kW transmitted at 1000 rpm?
A multiplate clutch has three pairs of contact surfaces. The outer and inner radii of the contact surfaces are 100 mm and 50 mm respectively. The maximum axial spring force is limited to 1 kN. If the coefficient of friction is 0.35 and assuming uniform wear, find the power transmitted by the clutch at 1500 r.p.m.
In a lamella clutch, the number of inner lamellae zi= 5 pieces, the number of outer lamellas zd=6 pieces. If the inner radius of the lamella is ri=70mm, the radius of the outer lamella is rd=120mm, the surface safety pressure of the lamella material is pem =0.8 MPa, the friction coefficient is u=0.1, what is the maximum power that the clutch can carry at n=120 rpm?
Find the power capacity and the cone angle of a cone clutch under uniform pressure having 220 mm major diameter, 180 mm minor diameter, length of contact of 120 mm, 880 rpm,and allowable pressure of 80 kPa.
A conical clutch has an included angle of 120°, a coefficient of friction of 0.4, and outer and inner diameters of 85mm and 18mm respectively. Using both the uniform wear theory and the uniform pressure theory, calculate the force required to press the two halves together if it is to transmit 300W at 750rev/min. The uniform wear theory and the uniform pressure theory deliver different values for torque in the same system. Which theory would be preferred in practice for use in calculations involving a friction clutch? Give reasons for your choice.
An engine of a motor vehicle with a wheel diameter of 712 mm develops 50 kW at 2,000 rpm combined efficiencyof the differential and transmission is 75% with an over-all speed reduction to. 1 determine he torque to bedelivered by the clutch N-m.
A multidisk clutch is required to have a torque capacity of 300 N.m. Due to space limitations, the inner and outer diameters are specified to be 62 mm and 128 mm respectively. The coefficient of friction is 0.30 and the limiting pressure for the friction material is 900 Pa. Find the minimum number disks using uniform-wear model. Please be clear on your solution!