A snowboarder with a mass of 98kg is initially stationary on a hilltop, then slides down on the snowy incline with a kinetic friction coefficient of 0.030 between the snowboard and the surface. The hill has an approximate angle of elevation equal to 38° from the horizontal. What is the acceleration of the snowboarder as he slides downhill if an uphill wind hits him with a force of 0.80N? O 5.0m/s? O 5.8m/s2 O 1.68m/s² O 6.03m/s?

A snowboarder with a mass of 98kg is initially stationary on a hilltop, then slides down on the snowy incline with a kinetic friction coefficient of 0.030 between the snowboard and the surface. The hill has an approximate angle of elevation equal to 38° from the horizontal. What is the acceleration of the snowboarder as he slides downhill if an uphill wind hits him with a force of 0.80N? O 5.0m/s? O 5.8m/s2 O 1.68m/s² O 6.03m/s?

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter5: Newton's Laws Of Motion

Section: Chapter Questions

Problem 48PQ: To get in shape, you head to the local gym to exercise by lifting weights. Using a lat machine (Fig....

See similar textbooks

Similar questions

A particle moves in a medium under the influence of a retarding force equal to mk(υ3+ a2υ), where k and a are constants. Show that for any value of the initial speed the particle will never move a distance greater than π/2kaand that the particle comes to rest only for t → ∞.
A cart is set rolling across a level table, at the same speed on every trial. If it runs into a patch of sand, the cart exerts on the sand an average horizontal force of 6 N and travels a distance of 6 cm through the sand as it comes to a stop. It instead the cart runs into a patch of gravel on which the can exerts an average horizontal force of 9 N, how far into the gravel will the cart roll before stopping? (a) 9 cm (b) 6 cm (c) 4 cm (d) 3 cm (e) none of those answers
To get in shape, you head to the local gym to exercise by lifting weights. Using a lat machine (Fig. P5.48), you notice that the wire connected to the bar is run around three different pulleys and is connected to a vertical stack of weights on the other end. The weights move up and down as you pull down on the bar. Suppose you set the machine so that the weight to be lifted is 120.0 lb. When you pull down on the bar, exerting a constant force, the acceleration experienced by the weights is 0.250 m/s2. What tension must exist in the wire connecting the bar and weights under these conditions? Assume the pulleys are massless and frictionless. FIGURE P5.48
A bicyclist starting from rest applies a force of F = 396 N to ride his bicycle across flat ground for a distance of d = 295 m before encountering a hill making an angle of theta = 29 degrees with respect to the horizontalThe bicycle and rider have a mass of m = 105 kg combined. In this problem, you can ignore air resistance and other losses due to friction What is the bicycle speed, v in m/s just before the hill ? If the cyclist start coasting at the bottom of the hill what distance , di in meters does the bike travel up in the incline
A 7450kg car is travelling at 28.7m/s when the driver decides to exit the freeway by going up a ramp. After coasting 383m along the exit ramp, the car's speed is 13.3m/s, and it is h=13.7m above the freeway. What is the magnitude of the average drag force Fdragexerted on the car?
How far will a 75 kg skier traveling at 20 m/s go up a 100 incline that has a coefficient of friction of 0.05 before coming to rest? I need a simple short answer please
A stone with a weight of 4.89 N is launched vertically from the ground levelwith an initial speed of 15 m/s and the air drag on it is 0.250 N throughout the flight. Find the speed of the stone before it hits the ground.
The kinetic friction force between a 8.1-kg object and a horizontal surface is 72 N. If the initial speed of the object is 74 m/s, what distance will it slide before coming to a stop?
A 118kg boxsits on a flat surface where it has a static friction coefficient ofμs= 0.524and a kinetic friction coefficient ofμk= 0.318.What is the minimum horizontal force that a worker must apply in order to get the boxtobegin moving?
Consider a box which is initially sliding up a hill at 75.0m/s. The angle of the hill with respect to the horizontal is 30.0 degrees, and the coefficient of kinetic friction between the box and the hill is 0.150. How far will the box slide up the slope? if the box slides back down the hill, how fast will it be going when it returns to its starting place? fast.
The engines of a tanker broke down and the wind pushes the ship with a constant speed of 1.5 m / s straight towards a reef. When the boat is 500 m from the reef, the wind stops and the engineer manages to start the engines. The rudder is stuck, so the only option is to try to accelerate backwards. The mass of the ship and its cargo is 3.6 x 107 kg and the engines produce a net horizontal force of 8 x 104 N. The hull can withstand impacts at a speed of 0.2 m / s or less. The retarding force that the water exerts on the hull of the ship can be neglected. a) The equation of motion that corresponds to the horizontal component is? b)The acceleration of the ship is equal to? c) If the reef does not exist, the vessel, before stopping, travels what distance?
Walking in Waikiki, a tourist steps out onto Kuhio Dr while texting. Unbeknownst to the sunburned visitor, the street has been closed for the filming of a car chase scene for Hawaii 5-0. Slamming on the breaks, the stunt driver is thrown against his seatbelt, stopping in 90m. If the driver and the car weigh a total of 544kg and were traveling at 18 m/s, what force does the 90kg driver feel? Sketch: Equations: Work: