A solid shaft is to transmit 250 kW at 180 rpm. The torsional shear stress is not to exceed 110 MPa. Without changing the length, material, and allowable stress, it is replaced by a hollowed section whose internal diameter equals 0.6 of the external diameter. Determine the diameter of the solid shaft (in mm).

A solid shaft is to transmit 250 kW at 180 rpm. The torsional shear stress is not to exceed 110 MPa. Without changing the length, material, and allowable stress, it is replaced by a hollowed section whose internal diameter equals 0.6 of the external diameter. Determine the diameter of the solid shaft (in mm).

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.12.4P: The stepped shaft shown in the figure is required to transmit 600 kW of power at 400 rpm. The shaft...

See similar textbooks

Similar questions

The stepped shaft shown in the figure is required to transmit 600 kW of power at 400 rpm. The shaft has a full quarter-circular fillet, and the smaller diameter D1= 100 mm. If the allowable shear stress at the stress concentration is 100 MPa, at what diameter will this stress be reached? Is this diameter an upper or a lower limit on the value of D2?
A solid shaft is transmitting 15 MW of power at 1760 rpm. If the allowable shear stress must not amount to 500MPa, determine the size of the shaft.
A 3-meter solid steel shaft, with an unknown diameter, twists by 5° as it experienced a shear stress of 60 MPa. What is the diameter of the solid steel shaft? Use G = 83 GPa.
A Solid shaft transmits 600 N.m torque. If the maximum shear stress induced in the shaft is 50 N/mm2, the minimum diameter of the shaft is
A steel propeller for a windmill transmits 5.7 kW at 43.4 rpm. If the allowable shear stress in the shaft must be limited to 72 MPa, determine the minimum diameter d required for a solid shaft.
find the maximum shear stress induced in a solid circular shaft of diameter 150 mm when the shaft transmits 150 KW power at 150 RPM.
A solid 38 mm diameter shaft is rotating at a speed of 510 rpm with a maximum shear stress of 78 MPa. Determine the power in kW being delivered by the shaft.
A solid steel shaft, whose Sy= 300 MPa and Su= 400 MPa, is used to transmit 3000 kW at 800 rpm. Determine its diameter.
A steel shaft with a diameter of 40 mm and the length of 1.1 m transmits 60 hp from an electric motor to a compressor. If the allowable shear stress is 50 MPa and the allowable angle of twist is 1.50, what is the minimum allowable speed of rotation.
a hollow shaft for a rotary compressor is to be designed to transmit maximum torque of 4750 n-m. the shear stress in the shaft is limited to 50 mpa. determine the inside outside diameter of the shaft if the ratio of inside to outside diameter of the shaft is 0.4
The internal loadings at a critical section along the steel drive shaft of a ship are calculated to be a torque of 2300 lb # ft, a bending moment of 1500 lb # ft, and an axial thrust of 2500 lb. If the yield points for tension and shear are sY = 100 ksi and tY = 50 ksi, respectively, determine the required diameter ofthe shaft using the maximum shear stress theory.
A line shaft rotating at 320 rpm is to transmit 35 kW power. The allowable shear stress for the shaft material is 56 N/mm2. Determine the diameter of the shaft?