A solid steel shaft is to be designed to transmit 700 kW at 1,500 revolutions per minute. The steel selected is a AISI 1030, hot rolled steel. The shaft is 1 mm long. Assume that the bending load on the shaft is negligible. Using a factor of safety of 1.5, design the diameter of the shaft.

A solid steel shaft is to be designed to transmit 700 kW at 1,500 revolutions per minute. The steel selected is a AISI 1030, hot rolled steel. The shaft is 1 mm long. Assume that the bending load on the shaft is negligible. Using a factor of safety of 1.5, design the diameter of the shaft.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.11.5P: A square tube section has side dimension of 20 in. arid thickness of 0.5 in. If the section is used...

See similar textbooks

Related questions

Q: Consider a solid steel shaft with an allowable shearing stress of 58 MPa. Design the shaft to…

Q: A shaft is to be fitted with a flanged coupling having 8 bolts on a circle of diameter 150mm. the…

A: Stress: When a component or a part is subjected to any external force, a resisting force will be…

Q: A motor driving a soiid circular steel shaft transmits 40 kW of power at 500 rpm. If the diameter of…

A: Given data as per question Power transmitted =40KW Speed =500 rpm Diameter of We know that Power…

Q: A solid circular shaft needs to be designed to transmit a torque of 50N.m. If the allowable shear…

A: As given in question, Torque being transmitted = T = 50 Nm = 50,000 Nmm Allowable shear stress of…

Q: A shaft is to be fitted with a flanged coupling having 8 bolts on a circle of diameter 150 mm. The…

Q: A 45 mm diameter shaft is made of steel with a yield strength of 400 MPa. A parallel key of size 14…

Q: A 5 ft long solid SAE4340 OQT1000 steel shaft is required to transmit a power of 180 HP. The shaft…

Q: At a machined shaft shoulder the small diameter d is 1.100 in, the large diameter D is 1.65 in, and…

Q: The driveshaft of an automobile is being designed to transmit 225 kW at 3239 rpm. Determine the…

Q: 2 A hollow simple supported shaft 3m made of steel with di/do of 0.6. The shaft is subjected to a…

Q: A steel shaft is transmitting 50 hp at 1200 rpm. The nature of the load and the type of the service…

Q: Select solid shafts to transmit (200 hp) each without exceeding a shear stress of 10000 psi. one of…

A: Given data: P=200 hpN1=20 rpmN2=20000 rpmτ=10000 psi Need to determine the diameter of the both…

Q: Problem 16.9. A solid eylindrical shaft is to transmit 300 kW power at 100 r.p.m. (a) If the shear…

A: a) Torque in the shaft can be determined as

Q: 5.1 A steel shaft is to transmit 4.5 MW at 3 Hz without exceeding a shearing stress o: MPa, or…

Q: A 50 mm diameter shaft is transmitting a power of 142.8 HP and is turning at 900 rpm. The shaft is…

A: given data ; diameter = 50 mmpower = 142.8 HP = 142.8 * 746 Wrpm = 900 rpmbending stress =…

Q: What is the maximum power P (kW) that can be transmitted by a shaft hollow (do = 50 mm, di = 40 mm)…

A: Outer diameter of shaft= 50mm Inner diameter of shaft= 40mm Rotational Speed of shaft= 600 rpm…

Q: J.A hollow shaft is 50 mm outside diameter and 30 mm internal diameter. An applied torque of 1.5 Nm…

A: Permissible stress is stress which produces due to pressure or forces which does not exceed the…

Q: A hollow shaft made from AISI 4340 steel has an outer diameter Do of 4 in. and an inne diameter Di…

Q: A motor is driving a solid circular steel shaft transmits 40kW of power at 500 rpm. If the diameter…

Q: A 2-in-diameter C1118, as rolled steel shaft rotates at 240 rpm. Assuming a repeated, reversed and…

Q: Problem 10.2. A stepped steel shaft with diameters d, = 56 mm and d = 52 mm is twisted by torques T1…

A: d1 = 56 mm d2 = 52 mm T1 = 2.5 kN.m T2 = 1.5 kN.m

Q: The motor supplies 11.1 kW at 19.9 Hz at A. The bearings shown permit free rotation of the shafts.…

Q: Problem 10.2. A stepped steel shaft with diameters d = 56 mm and d = 52 mm is twisted by torques T =…

A: Given data: The diameter of AB, dAB=56 mm. The diameter of BC, dBC=52 mm. The torque in section BC,…

Q: A hollow shaft for a rotary compressor is to be designed to transmit a maximum of torque of 4750…

A: Given Data⇒ Hollow shaft Maximum torque : T=4750 N-m Ratio of inside to outside diameter is :…

Q: A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum…

A: Given, Length of shaft = L = 1 m Power transmitted = P = 30 kW = 30 x 103 W Shaft RPM = 700 rpm…

Q: Diameter of shaft based on Strength design is in mm Diameter of shaft based on rigidity design is…

A: For solution refer below images.

Q: Problem:1 A solid circular shaft is subjected to a bending moment of 3000 N-m and a torque of 9000…

A: Given data: The bending moment of a solid circular shaft (M) is 3000 N-m The torque of a solid…

Q: Design of a Shaft subjected to Alternating Loads 1. [Proof of Concept] Considéra machined steel…

A: Consider Tmax as the maximum torque, Tmin as the minimum torque, Mmax be the maximum bending moment,…

Q: 8. Design a shaft and flange for a Diesel engine in which protected type of flange coupling is to be…

Q: A hollow shaft has to be designed for a marine engine delivering 1200 kW when running at 120 r/min.…

Q: A rubber (E- 164 psi; Se- 308 psi) beam is supported on two springs (k-960 Ib/ft) and loaded in…

Q: A solid 2.0 in. diameter shaft is used to synchronize multiple mechanisms in a manufacturing plant.…

Q: A 3 ft long solid SAE4340 OQT1000 steel shaft is required to transmit a power of 200 HP. The shaft…

A: Given data as question Length of shaft = 3 feet Power of shaft = 200 hp Sped of shaft = 1500 rpm…

Q: Consider a simply supported steel shaft as depicted below with 4 cm in diameter and 1 m span between…

A: The critical speed of the shaft with multiple loading can be found out by using methods like…

Q: 7.9 A solid steel shaft of 200 mm diameter transmits 5 MW at 500 rev/min. It is proposed to alter…

Q: Problem 1: (P9, P10, M5, M7, D5) Obtain a preliminary design of the shaft by performing the…

Q: Solve the following problem Two designs for a shaft are being considered. Both have an outside…

Q: 9. Find the diameter of a shaft to transmit twisting moments varying from 800 N-m to 1600 N-m. The…

Q: Design a typical rigid flange coupling for connecting a motor and a centrifugal pump shafts. The…

A: Given DataP=15kWN=1000 rpmTs=60MPaTbolt=25 MPa

Q: A section of a rotating shaft is under an alternating bending moment of 70NM and a torque of 35NM.…

Q: A shaft is used to transmit 55 kW power at 500 rpm is subjected to a bending moment of 450 Nm.…

A: Given Data The power transmitted by the shaft is: P=55 kW=55000 W The rotation speed is: N=500 rpm…

Q: A 3-m steel shaft is to transmit 100 kW at 300 rpm. It carries two gears each weighing 1.9 kN…

Q: A rotating shaft of 16 mm diameter is made of plain carbon steel. It is subjected to axial load of…

Q: Q6: The engine of a ship develops 440 kW and transmits the power by a horizontal propeller shaft…

A: The engine of a ship develops 440 kW and transmits the power by a horizontal propeller shaft which…

Q: A 16 ft steel line shaft has no bending action except its own weight. What power in hp can shaft…

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

A solid steel shaft is to be designed to transmit 700 kW at 1,500 revolutions per minute. The steel selected is a
AISI 1030, hot rolled steel. The shaft is 1 mm long. Assume that the bending load on the shaft is negligible. Using
a factor of safety of 1.5, design the diameter of the shaft.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A square tube section has side dimension of 20 in. arid thickness of 0.5 in. If the section is used for a 10-ft-long beam subjected to 1250 kip-in, torque at both ends, calculate the maximum shear stress and the angle of twist between the ends. Use G = 11,600 ksi.
Q.2 A hollow simple supported shaft 3m made of steel with di/do of 0.6. The shaft is subjected to a bending force of 4 KN and transmits 52 KW with 150 rpm. Find the outer and inner diameter of the shaft, if the ultimate shear stress of 600 MPa and allowable compression stress of 100 MPa, tack safety factor 7.
A 5 ft long solid SAE4340 OQT1000 steel shaft is required to transmit a power of 180 HP. The shaft speed is 3,000 rpm. The allowable shear stress is 50 ksi and the allowable angle of twist per foot of length is 0.04 radians. Determine the minimum diameter that meets the design requirements. Note- Shear modulus for steel is given in images
Problem: 1 A line shaft rotating at 55 RPS is to transmit 28 kW. The shaft may be assumed to be made of mild steel with an allowable shear stress of 85 MPa. Determine the diameter of the shaft, neglecting the bending moment on the shaft.
A solid shaft 18 m Length is to transmit power at 2200 rpm. If the shaft is stressed to 275 MPa when twisted at 40⁰, what should be the design diameter in ( mm) of the shaft and the maximum power transmitted in kW? Use shear modulus G = 100 GPa.
A 21 feet steel line shaft has no bending action except its own weight. What power in hip can the shaft deliver at a speed of 360 rpm? Consider that the torsional deflection will not exceed 0.08 degree per ft length.
Problem:1 A solid circular shaft is subjected to a bending moment of 3000 N-m and a torque of 9000 N-m. The shaft is made of 45 C 8steel having ultimate tensile/ bending stress of 850 MPa and a Ultimate shear stress of 650 MPa. Assume a factor of safety of 10. Determine the diameter of the shaft from both theories.
A 16 ft steel line shaft has no bending action except its own weight. What power in hp can shaft deliver at a speed of 200 rpm. Consider that the torsional deflection wm not exceed 0.08o/ft of length.
A 5 ft long solid SAE4340 OQT1000 steel shaft is required to transmit a power of 180 HP. The shaft speed is 3,000 rpm. The allowable shear stress is 50 ksi and the allowable angle of twist per foot of length is 0.04 radians. Determine the minimum diameter that meets the design requirements.
Design a hallow shaft (Diameter and length) that develops 80 kW of power while rotating at a speed of 4000 rpm. The design constrains are as under:The angle of twist not to exceed 0.200Shear stress is not to exceed 480 MN/m2The outer diameter is to be twice the inner diameter. The shaft length is to be three times the outer diameter. Modulus of rigidity = 79 GN/m2.
rotating shaft of 16 mm diameter is made of plain carbon steel. It is subjected to axial load of 5000 N, a steady torque of 50 N-m and maximum bending moment of 75 Nm. Calculate the factor of safety available based on 1. Maximum normal stress theory; and 2. Maximum shear stress theory. Assume yield strength as 400 MPa for plain carbon steel
A machine shaft supported on bearings 2 m apart is to transmit 180 KW at 200 rpm while subjected to a reversed bending load of 5000 N located at a distance of 60 cm from one bearing. Allow a shear stress of 40 MPa and a bending stress of 80 MPa, determine the shaft diameter for steady loading if km = 1.5 and ks = 1.0. note: answer must be in mm