A solution prepared by dissolving 25.8 mg of benzene (78.11 g/mol) in hexane (86.16 g/mol) and diluting to 250 mL had an absorption peak at 256 nm and an absorbance of 0.266 in a 1.000-cm cell. Answer the ff. questions: What is the concentration of the benzene solution? 1.32x10-3 M What is the percent transmittance? ISelect)

A solution prepared by dissolving 25.8 mg of benzene (78.11 g/mol) in hexane (86.16 g/mol) and diluting to 250 mL had an absorption peak at 256 nm and an absorbance of 0.266 in a 1.000-cm cell. Answer the ff. questions: What is the concentration of the benzene solution? 1.32x10-3 M What is the percent transmittance? ISelect)

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter25: Instruments For Optical Spectrometry

Section: Chapter Questions

Problem 25.14QAP

See similar textbooks

Similar questions

Can I have some help with this chart Calculate Absorbance from % Transmittance for each Standard and the Unknown Solution using A = - log T. • Calculate the concentration of each standard based on dilution using C1V1 = C2V2 .
1.How many milliliters of 100 % (w/v) ethanol are equal to 0.57 millimoles (mmole)? (Hint: It is not 57 ml.) 2. What is the molar concentration, millimolar (mM) concentration, and micromolar (µM) concentration when 3 micromoles (µmoles) of glycine are diluted to a final volume of 6 L? 3. If the percent transmittance of a colored solution is found to be 35%, what amount of distilled water must be added to 100 ml of this solution in order to have a solution with a percent transmittance of 75%.
A solution prepared by dissolving 25.8 mg of benzene (78.11 g/mol) in hexane (86.16 g/mol) and diluting to 250 mL had an absorption peak at 256 nm and an absorbance of 0.266 in a 1.000-cm cell. If a sample of hexane with benzene had an absorbance of 0.153 at 256 nm in a cuvette with 1.000-cm path length, find the concentration of benzene in molarity. A. 1.51×10-4 M B. 7.59×10-4 M C. 5.41×10-4 M D. 6.69×10-4 M
3.) The accuracy of a spectrophotometer is evaluated by preparing a solution of 60.06 ppm K2Cr2O7 and measuring its absorbance at a wavelength of 350 nm in a cell with a pathlength of 1.00 cm. The expected absorbance is 0.640. What is the expected molar absorptivity of K2Cr2O7 at this wavelength? 4.) A solution’s transmittance is 35.0%. What is the transmittance if you dilute the solution to half of its initial concentration?
2.) A solution containing 4.48 ppm KMnO4 has an absorbance of 0.265 in a 1.00 cm cell at 520 nm. If the percent transmittance of an unknown solution is 63.2%, what is the absorbance of the solution? Calculate the concentration of the unknown solution.
A particular food coloring has a molarabsorptivity of 3.8*10 3 cm -1 M -1 at 510nm. What will be the absorbance of a 2*10-4M solution in 1 -cm cuvette at 510 nm? What will be the percent transmittance of thesolution in (a)?
Which of the following statements concerning calibration curves are true? 1. A plot of signal versus analyte amount or concentration 2. Measure the response of an instrument by first measuring the response from a standard 3. Used to calibrate a measurement over an extended range. a. 1 only b. 1 an 2 only c. 1 and 3 only d. 2 and 3 only e. 1, 2, and 3
A 50 mL aliquot of river water is treated with a conditioning solution, which is stirred and recorded at 500 nm. The equipment reading indicated 40.5% Transmittance with 1.5 cm optical path cuvettes. Calculate the ppm of sulfate (PM 96 g / mol) in river water if a standard of 3.0x10-5 mol / L of sulfate, under the same conditions, gave 55% Transmittance in cuvettes with 1.5 cm of passage. optical.
A inorganic compound whose concentrations is 0.013 M in a 1 cm pathlength cell has transmittance of T=8.23%.(i) Find the absorbance (A) and(ii) The molar absorptivity.
An aqueous solution whose concentration is 0.00356 M was analyzed using spectrophotometer with a molar absorptivity of 412 cm-1 mol-1 L in a cell with a 2.00 cm pathlength. Calculate the absorbance and transmittance for the above solution.
To quantify the Cadmium content in a water sample, 5 aliquots of 10 mL were taken, adding to each one of them a volume of a standard solution of Cd (2 mg / mL); after the addition the final volume for all solutions was 50 mL. The absorbance reading was taken in an Atomic Absorption spectrophotometer, the data recorded were: Aliquot 1 2 3 4 5 Cd solution (mL) 0 1 2 3 4 Absorbance 0.163 0.240 0.319 0.402 0.478 Calculate the ppm of Cd.
Find the concentration of benzene in hexane if the absorbance is 0.188 in a 1.000-cm cell.