A steel pipe having a length of 2 m, an outside diameter of 0.2 m and a wall thickness of 10 mm, is subjected to an axial compression of 200 KN. Assuming a modulus of elasticity of 200GPA and a Poisson's ratio of 0.3, find the shortening of the pipe. 200 mm 10 mm

A steel pipe having a length of 2 m, an outside diameter of 0.2 m and a wall thickness of 10 mm, is subjected to an axial compression of 200 KN. Assuming a modulus of elasticity of 200GPA and a Poisson's ratio of 0.3, find the shortening of the pipe. 200 mm 10 mm

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.2.6P: A rubber ball (sec figure) is inflated to a pressure of 65 kPa. At that pressure, the diameter of...

See similar textbooks

Related questions

Q: In the test on a steel bar, E = 29.57 x 10° psi and v = 0.303. Find the shear modulus, G. %3D

A: Given data: E=29.57×106 psiν=0.303 Need to determine the value of shear modulus.

Q: A steel bar 2m long, 20 mm wide and 10 mm thick is subjected to a pull of 20 kN in the direction of…

Q: A simply supported beam, 50mm wide by 100mm high and 300 mm long is subjected to a concentrated load…

Q: A circular pipe of internal diameter 30 mm and thickness 4 mm is subjected to a force 30 kN and the…

Q: Given a shear stress of txy 5000 psi and a shear modulus of G 1.15 x 107 %3| psi, find the shear…

A: Shear stress, τxy=5000 psiShear modulus, G=1.15*107

Q: Find the stresses in each direction, also find the change in volume of the block of dimension 110 mm…

A: stress is defined as the force per unit area.

Q: An cylinder is 30 cm in diameter and the steam pressure is 7 kg/cm. If the cylinder head is held by…

Q: A drill drills a hole in a leg of a furniture. Uses a hand-operated drill with a bit of diameter…

A: Given Data Diameter of drill bit is : d=5.79 mm=5.79×10-3 m Resisting torque is : T=0.36 N·m…

Q: A materila has a modulus of elasticity (E=17 Mpa) and a poissons ratio of 0.27. what is the…

A: Given:modulus of elasticity, E=17 MPaPoissons ratio, μ=0.27

Q: If Young's modulus of some material is 150 GPa and shear modulus is 50 GPa, find the poisson's ratio…

A: Given, Young's modulus = E = 150 GPa Shear modulus = G = 50 GPa Let us consider, Poisson's ratio…

Q: Given a shear stress of Txy = 5000 psi and a shear modulus of G 1.15 x 107 psi, find the shear…

Q: A sheet of plywood consists of three equally thick sheets, the upper and lower sheets having their…

A: Given Tensile modulus, E1 = 10 GPa E2 = 0.4 GPa Find Tensile…

Q: A rod subjected tensile stress is 15.92 x 10°N/mm2 and tensile strain is 0.01 then find young…

Q: A wire of diameter 3 mm and length 4 m extends by 2.5 mm when a force of 10 N is applied. Find…

A: Given, Diameter of the wire = d = 3 mm Original length of the wire = L = 4 m = 4000 mm Change in…

Q: Given data: Stress-35 MPa Modulus of elasticity=78 MPa Find strain

A: Find the strain. Using hook's law.

Q: A structure, which cross-section is S= 100 mm², is submitted to a tension of 1kN. What is the…

Q: A proving ring is 25 cm mean diameter, 4 cm wide and 6 mm thick. The maximum stress permitted is 550…

A: A providing ring has a diameter of 25 cm, a width of 4 cm, and a thickness of 6 cm.The greatest…

Q: A bar of size 3m long, 250 mm wide and 150 mm thick is subjected to pull of 50 kN. Find change in…

A: Given data as per question Length of bar=3mwidth of bar=250mmthickness=150mmPulling force =50…

Q: rut in a space frame has a rectangular cross section of 10.0 mm by 30.0 varies from a tensile force…

Q: A steel circular tube is subjected to torsion by torques T applied at the ends as shown below. The…

A: This problem is related to the torsion of the shaft. torsion, when the twisting moment is applied to…

Q: QI/ For the beam shown in Fig.1, determine the thickness (t) so that the stresses will not exceed…

Q: What is the Poisson's ratio if the ratio of Young's modulus (E) to the shear modulus (G) is 2?

A: Given data, The ratio of young's modulus and shear modulus is 2 ie E/G=2

Q: Find the stresses in each direction, also find the change in volume of the block of dimension 120 mm…

A: The given values are - Dimensions 120×45×43 mm3Poisson's Ratio μ= 0.3E= 140 GPa=140×103 MNm2 Tensile…

Q: A one mm diameter steel wire is wounded around a copper tube with external and internal diameters of…

A: Given: The diameter of wore, d = 1 mm The external diameter of tube, Do = 140 mm The internal…

Q: Find the stress if strain 0.55 and modulus of elasticity is 50 MPa

A: Given data : Modulus of elasticity=E Strain=ε To find : Stress

Q: A steel bar of diameter 1cm and length 10cm is made of steel E=200Gpa and yield strength of 300Mpa…

Q: A 3/4 -in-diameter steel tension rod is 6 ft long and carries a load of 15 kip. Find the tensile…

A: Given data: Diameter of rod = 0.75 inch = 0.01905 m Length of rod = 6 ft = 6 x 12 = 72 inch =…

Q: A double riveted double cover butt joint in plates 20 mm thick is made with 25 mm diameter rivets at…

Q: A helical spring having squared and ground ends has a total of 20 coils and its material has modulus…

Q: Q24 Find the stresses in each direction, also find the change in volume of the block of dimension…

A: Given data Where ‘T’ and ‘C’ represent tensile and compressive nature respectively.

Q: A composite spring has two closed coiled springs connected in series, each spring has 12 coils at a…

Q: For a 60° angle lamina of graphite/epoxy with 70% fibre volume fraction under stresses in global…

Q: A strip of metal is originally 5 m long. It is stretched in 3 steps: first to a length of 6 m, then…

Q: W 3 M M

A: Assumption: - The bone is considered to be a cantilever beam of the hollow section. The weight of…

Q: force of 400 N is applied, estimate the lengt and diameter change. Young's modulus and

A: For solution refer below images.

Q: A steel bar 50 mm wide, 12mm thick and 300 mm long is subjected to an axial pull of 84 kN. Find the…

A: Suppose a bar of length L and Young's Modulus E is subjected to an axial force F. Then, the bar will…

Q: FIND: MODULUS OF ELASTICITY

A: Given tabulation values to FIND: MODULUS OF ELASTICITY

Q: Q.1: Find out Young's modulus value of a material whose elastic stress and strains are 4 N/m² and…

A: Given, Elastic stress = σ = 4 N/m2 Strain = ε = 0.30 In the elastic region, as per Hooke's law,…

Q: What will be the shear modulus of the with elastic modulus of 240 GPa and Poisson's ratio is 0.2?

A: Shear modulus G = E/(2(1+poisson ratio))

Q: Young's modulus for the material of a substance is 7.25 x 1010 N.m-2 and its bulk modulus is 11 x…

A: Given data : Youngs modulus=EBulk modulus=KTo find :Poisson ratio

Q: A steel bar having 65mm*65mm*3000mm dimension is subjected to an axial force of 128 kN. Taking…

Q: 3. Given a shear stress of Txy = 5000 psi and a shear modulus of G = 1.15 x 107 psi, find the shear…

A: As per our guidelines, we are supposed to answer only first one question in case of multiple…

Q: A punch for making holes in steel plates assumes that having a diameter of 0.75 in. is used to punch…

Q: A closely coiled helical spring is made of 6 mm diameter steel wire, the mean diameter of the coil…

A: Given: axial load = 529 N coil mean diameter = 60 mm wire diameter = 6 mm

Q: Find the stresses in each direction, also find the change in volume of the block of dimension 125 mm…

Q: A thick-wall underwater pipe is placed at 20m below sea level. The pipe is carrying compressed…

Q: Find Young's Modulus, yield stress, ultimate stress, percentage elongation and percentage reduction…

A: Given:- D=25mm Gauge length=200mm Least count=0.001mm At load 30kN, extensometer reading=60 At load…

Q: A wooden bar is subjected to a tensile stress of 5 mpa. What will be the values of normal stress and…

A: Given data The tensile stress σ = 5 MPa. angle between the section and the tensile stress is θ =…

Question

A steel pipe having a length of 2 m, an outside diameter of 0.2 m and a wall thickness of
30
10 mm, is subjected to an axial compression of 200 KN. Assuming a modulus of elasticity
of 200GPA and a Poisson's ratio of 0.3, find the shortening of the pipe.
200 mm
10 mm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A brass plate with a modulus of elastici ty E = 16 X 106 psi and Poisson’s ratio a = 0.34 is loaded in biaxial stress by normal stresses r and cry. (sec figure). A strain gage is bonded to the plate at an angle 4 = 350 If the stress o is 10,700 psi and the strain means used by the gageise = 390 X 106.whatisthcmax- imum in-plane shear stress (Tr, ),. and shear strain (>‘ ).? What is the maximum shear strain (y ) in the x-: plane? What is the maximum shear strain (y ).. in the y-r plane?
A W 8 × 28 beam of a length 10 ft is held between immoveable supports. The beam has a modulus of elasticity E = 29,000 ksi and coefficient of thermal expansion a = 6.5 ×10-6 /?. If the temperature of the beam is raised uniformly by an amount AT = 20°F, calculate the thermal stress aTin the beam.
Solve the preceding problem if the diameter is 480 mm, the pressure is 20 MPa, the yield stress in tension is 975 MPa, the yield stress in shear is 460 MPa, the factor of safety is 2,75, the modulus of elasticity is 210 GPa, Poissorfs ratio is 0.28, and the normal strain must not exceed 1190 x 10" . For part (b), assume that the tank thickness is 8 mm and the measured normal strain is 990 x 10~ .
A hollow, circular, cast-iron pipe (Ec =12,000 ksi) supports a brass rod (Ec= 14,000 ksi} and weight W — 2 kips, as shown. The outside diameter of the pipe is dc= 6 in. (a) If the allowable compressive stress in the pipe is S00O psi and the allowable shortening of the pipe is 0.02 in., what is the minimum required wall thickness trmm? (Include the weights of the rod and steel cap in your calculations.) (b) What is the elongation of the brass rod Srdue to both load Wand its own weight? (c) What is the minimum required clearance h?
A spherical steel pressure vessel (diameter 500 mm, thickness 10 mm) is coated with brittle lacquer that cracks when the strain reaches 150 X 10~ (see figure). (a) What internal pressure p will cause the lacquer to develop cracks? (Assume E = 205 GPa and v = 0.30.) (b) If the strain is measured at 125 x 10-6, what is the internal pressure at that point?
An aluminum bar has length L = 6 ft and diameter d = 1.375 in. The stress-strain curse for the aluminum is shown in Fig. 1.34. The initial straight, line part of the curve has a slope (modulus of elasticity) of 10.6 × 106 psi. The bar is loaded by tensile forces P = 44.6 k and then unloaded. (a) That is the permanent set of the bar? (b) If the bar is reloaded. what is the proportional limit? hint: Use the concepts illustrated in Figs. l.39b and 1.40.
The rails of a railroad track are welded together at their ends (to form continuous rails and thus eliminate the clacking sound of the wheels) when the temperature is 60°F. What compressive stress ?? =6.5×10-6 /? is produced in the rails when they are heated by the sun to 120"F if the coefficient of thermal expansion a = the modulus of elasticity E = 30 × 106 psi?
A rubber ball (sec figure) is inflated to a pressure of 65 kPa. At that pressure, the diameter of the ball is 240 mm and the wall thickness is 1.25 mm. The rubber has a modulus of elasticity E = 3,7 MPa and Poisson's ratio v = 0.48. (a) Determine the maximum stress and strain in the ball, (b) If the strain must be limited to 0.425, Find the minimum required wall thickness of the ball.
For a given material, Young’s modulus is 100GPa and shear modulus is 40GPa. Find the bulk modulus and lateral contraction of a round bar of 40mm diameter and 2.5 m long when stretched 2.5 mm.
A materila has a modulus of elasticity (E=17 Mpa) and a poissons ratio of 0.27. what is the approximate value of the shear modulus, G?
A closely coiled helical spring is made of 6 mm diameter steel wire, the mean diameter of the coil is 60 mm and there are 8 coils. Taking the modulus of rigidity as 100 kN/mm2, find the stress, in kPa, in the wire when carrying an axial load of 529N.
A hollow copper pipe undergoes a 1% change in length under a tensile load. If the Young’s modulus of copper is 110 GPa, the pipe’s outer diameter is 2 cm and its wall thickness is 5 mm, what is the magnitude of the tensile load? Consider the whole change happening in the elastic region.