Answered: A steel wire 1.7 mm in diameter…

A steel wire 1.7 mm in diameter stretches by 0.037% when a mass is suspended from it. The elastic modulus for steel is 2.0 x 1011 N/m2. How large is the mass?

Engineering Fundamentals: An Introduction to Engineering (MindTap Course List)

5th Edition

ISBN:9781305084766

Author:Saeed Moaveni

Publisher:Saeed Moaveni

Chapter7: Length And Length-related Variables In Engineering

Section: Chapter Questions

Problem 43P: A 10 cm long rectangular bar (when subjected to a tensile load) deforms by 0.1 mm. Calculate the...

See similar textbooks

Related questions

Q: What pressure is required to reduce the volume of water by 0.6 percent? Bulk modulus of elasticity…

Q: A steel rod of circular section tapes from 2 cm diameter to 1 cm diameter over a length of 50 cm. If…

Q: A simply supported beam. 2 in wide by 4 in high and 12 ft long is subjected to a concentrated load…

Q: D F B 30° 30° 30° 30° H C E G F10ʻ- 10' 10' 10' 600 lb 1000 lb 400 lb

Q: A steel column is 3 m long with diameter equal to 0.4m. It carries a load of 50 MN. Given that the…

Q: Bronze A = 300mm? 2.00 m E = 83 GPa Steel 1.00 m A = 600mm? E = 200 GPa A 0.60m 1.00 m 1.00m ΜN kN

Q: A steel rod, circular in cross-section, tapers from 30 mm diameter to 15 mm diameter over a length…

A: Given:- The steel rod tapers from 30 mm diameter to 15 mm diameter The length of the rod = 600 mm…

Q: 1. A hollow steel column is subjected to a load of 180-KN, determine the change in length if the…

Q: A mass of 30kg is hung from a steel wire of radius 7cm and length of 40m. What should be the minimum…

A: Given data : Mass (M)=30 kgLength (L)=40 mRadius (R)=7 cmMaximum stress (σ)=2.4×108 N/mm2

Q: 3. What is the weight of a steel ball whose radius is 20 inches? The density of steel is 7.8 g/cm³.

Q: A 10 lb block is in equilibrium. What is the magnitude of the friction force between this block and…

Q: A liquid compressed in a cylinder has a volume of 1000 cm3 at 0.95 MN/m2 and a volume of 1000 cm3 at…

Q: A liquid compressed in a cylinder has a volume of 1000 cm³ at 1 MN/m? and a volume of 995 cm³ at 2…

A: Given data, Volume of cylinder=1000 cm3 at 1MN/m2 and 995 cm3 at 2MN/m2 to find bulk modulus of…

Q: Figure 5 shows a steel rod of 200 mm length (L) with modulus of elasticity, E = 200 GPa and…

Q: If aluminum weighs 25.9 kN/m3, how much will a 305-mm-diameter sphere weigh when immersed in water?

A: Buoyancy force: The buoyancy force is exerted on the floating or immersed body. The buoyancy force…

Q: A cube made of an alloy with dimensions of 50 mm x 50 mm x 50 mm is placed into a pressure chamber…

Q: Problem 3.5 A wire 4 meters long is stretched horizontally between points 4 meters apart A load W…

Q: the rectangular simply supported beam shown in (Figure 1) The beam is made of wood having a modulus…

A: Given :

Q: An aluminum rod has a diameter of 10 mm and a length of 800 mm. If an axial tensile force of 200 kN…

A: Applied load P = 200 kN = 200 x 103N length of rod l = 800 mm poisson's ratio = 0.35 E = 70 GPa =…

Q: PROBLEM 5: An aluminum wire 3 mm in diameter and 4 m long is used to support a mass of 50 kg. What…

A: To find the elongation-

Q: If aluminum weighs 25.9 kN/m3, how much will a 305-mm-diameter sphere weigh when immersed in water?…

A: Introduction : Unit Weight : Unit weight =Weight Volume units: Weight : KN Volume : m3 Given that…

Q: Calculate the strain energy stored in a bar 3m long and 5cm in diameter when it is subjected to a…

A: Given, Length of bar L = 3m = 300cm Diameter d = 5cm Tensile load P = 8t = 8000kg E = 2×10⁶kg/cm²…

Q: Calculate the stiffness of a homogenous bar having elastic modulus of 200 GPa, length of 2 m, and…

Q: A steel rod having a cross-sectional area of 318 mm2 and a length of 95 m is suspended vertically…

Q: A compound bar consisting of bronze, aluminum, and steel segments is loaded axially as shown in the…

Q: Calculate the stiffness of a homogenous bar having elastic modulus of 200 GPa, length of 2 m, and…

A: To find:- the stiffness of a homogenous bar having elastic modulus of 200 GPa, length of 2 m, and…

Q: a steel wire is 4m long and 2mm in diameter .how much is it elongated by 20kg body suspended on it ?…

A: Stress is defined as the ratio of the stress to the unit area applied. σ = PA =20×9.81π4×2×10-32…

Q: Question 1 A specimen of ductile cast iron having a rectangular cross section of dimensions 4.8 mm x…

A: Given, Dimension=4.8mm*15.9mm

Q: A 20mm-diameter bar of this alloy is used as a structural member in an engineering design. The…

Q: How much will a steel rod lengthen under tension with the following considerations? The steel rod is…

Q: A force of 8.78 x 10 5 N applied on a drop hammer at a construction site slamming the metal at a…

A: Force applied on drop hammer = 8.78×105 NDistance driven by metal into ground h = 0.12 mDistance…

Q: Actual weight of steel bars = 1.520 kg/m, Standard weight of steel bars (16mm )= 1.579 kg/m, Load at…

Q: An alloy has a yield strength of 41 ksi, a tensile strength of 57 ksi, and an elastic modulus of 16…

A: Given: The diameter of the cylindrical specimen is 0.5 in. The length of the cylindrical specimen is…

Q: Calculate the stiffness of a homogenous bar having elastic modulus of 200 GPa, length of 2 m, and…

A: STIFFNESS: IT IS THE FORCE REQUIRED TO PRODUCE UNIT DEFLECTION. K= P/∆ ∆= PL/AE

Q: A round steel bar of length 40 cm consists of two equal portions of 20 cm each having diameters of…

A: Given that, Length of each portion, L1= L2 = 20cm Load on each bar , P1 = P2 = 10 tonnes = 10⁴kg E =…

Q: A 10 cm long rectangular bar (when subjected to a tensile load) deforms by 0.1 mm. Calculate the…

A: Calculate the normal strain?

Q: Determine the mass moment of inertia of the figure shown about the x,y, and z axis. The materials…

A: Weight = 60KN/m3 radius of cylinder (r)= 0.1/2 = 0.05m height of cylinder (h)= 0.4m So, mass of…

Q: A compound bar consisting of bronze, aluminum, and steel segments is loaded axially as shown in the…

A: Axial Deformation The deformation that occurs in a body due to axial loading is known as axial…

Q: If an aluminum weighs 165 lb/ft^3, How much will a 12-in dia. sphere weigh when immersed in water?…

Q: Given that a steel cylinder of dimensions 12.0 mm in diameter and 70 mm long is subjected to…

A: (a) The modulus of elasticity is the slope of the line. E=∆σ∆z=200-00.001-0=2.0×105 MPa Therefore,…

Q: Calculate the strain energy stored in a bar 3m long and 5cm in diameter when it is subjected to a…

A: Given that: Length of bar, l = 3m Diameter of bar, d = 5cm…

Q: PROBLEM 3: A material has a modulus of elasticity of 200 GPa. Find the minimum cross sectional area…

Q: The figure shows a series of varying metals rigidly attached to each other. Axial loads and their…

Q: Calculate the stiffness of a homogenous bar having elastic modulus of 200 GPa, length of 2 m, and…

A: To find:- the stiffness of a homogenous bar having elastic modulus of 200 GPa, length of 2 m, and…

Q: A wood block with a mass of 50 kg rests on an inclined plane where the coefficient of friction at…

A: Data given m = 50 kg u = 0.5

Q: Actual weight of steel bars = 2.340 kg/m, Standard weight of steel bars (20mm )= 2.470 kg/m, Load at…

Q: A compound bar consisting of bronze, aluminum, and steel segments is loaded axially as shown in the…

A: We will draw Free Body Diagram for each section.

Q: The cross section of the rim of an iron flywheel 3 ft. In diameter is a rectangle 12" by 3". How…

A: Given: The diameter of the flywheel is 3 ft. The cross-section of the rectangular rim is 12 in x 3…

Concept explainers

Asphalt Binders and Mixtures

Asphalt binders are subsidiary products procured during the refining process of petroleum while manufacturing gasoline, diesel, and similar petroleum products. Asphalt binders are obtained from the residue that remains after the distillation of petroleum, this residue is further subjected to steam distillation and oxidation to remove the traces of gas oil present in the residue. Certain additives or modifiers are also added to asphalt binders to alter them to suit different applications.

Question

I need the answer as soon as possible

A steel wire 1.7 mm in diameter stretches
by 0.037% when a mass is suspended from
it. The elastic modulus for steel is 2.0 × 1011
N/m2. How large is the mass?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A 10 cm long rectangular bar (when subjected to a tensile load) deforms by 0.1 mm. Calculate the normal strain.
strength of materials... answer only For the beam shown, calculate the magnitude of the bending stress (in psi) at the bottom of the beam on a section 1.52 feet to the right of B if P = 2002 lb, Q = 8084 lb, w = 1.18 in, L = 8.47 in, b = 3.69 in, and h = 1.12 in. Round off the final answer to two decimal places.
A copper wire is 1.0 m long and its diameter is 10 mm. If the wire hangs vertically, how much weight must be added to its free end in order to stretch it 3.0 mm?
The cross section of the rim of an iron flywheel (S+3) ft. In diameter is a triangle 12" by 3". How much does the rim weigh? Note: Iron weighs 450lb/cu ft. S=10
A 59 kN axial load is applied to a metal bar with a rectangular cross-section, 11 mm wide by 21 mm thick. While the load is applied, the bar elongates 2.5 mm. The modulus of elasticity and the Poisson's ratio are 100 GPa and 0.35, respectively. Assuming that the bar is still behaving elastically, how long is the original length of the bar in meters? Round your answer to 1 decimal place.
An alloy steel having a diameter of 0.45 in. extends 0.002 in. over a gage length of 2.2 in. due to a tensile load of 3900 lb. What is the modulus of elasticity of this alloy steel? A)29,010 ksi B)27,000 ksi C)30,000 ksi D)28,000 ksi
Steve Roger measured a line and found it out to be 950 m long using a 20 – m tape under a steady pull of 4 kg at a mean temperature of 25°C. The tape was held in the air and supported at both ends and at the center. Determine the correct length of the line if the tape used is of standard length at 22°C under a pull of 6 kg. Assume the cross-sectional area of tape to be 0.05 cm2, modulus of elasticity as 2.10 x 10^6 kg/cm^2, weighs 0.08 kg/m, and a Coefficient of Thermal Expansion to be 0.0000116/°C.
A wire 4m long is stretched horizontally between points A and B 4m apart. A load W placed at the center of the wire produces a sag of 53.4mm,a. If the wire is 25mm2in cross-section and the Young’s modulus is 200GPa, what is the magnitude of load W?b. If the load was reduced by 40%, what will be the sag?
A steel rod is 0.02 mi n diameter, and 2.5 m in length. The modulus of elasticity of this material is 210 GPa and a Poison's Ratio of 0.2. The change in diameter after applying a tensile force of 150 KN is?
The bottom of a steel "boat" is a 7 m ✕ 8 m ✕ 6 cm piece of steel (ρsteel = 7900 kg/m3). The sides are made of 0.580 cm thick steel. What minimum height must the sides have for this boat to float in perfectly calm water? The side height should not include the thickness of the bottom. (Answer in cm, thanks)
A piece of steel wire 100 feet long, with a cross-sectional area of 0.004 aq. in., must be stretched with a pull of 16 pounds when in use . if the modulus of elacticity of steel is 30,000 psi: a) what is the total elognation in the entire length of the wire? b) what tensile stress is producted by the pull?
A liquid compressed in a cylinder has a volume of 1000 cm3 at 0.95 MN/m2 and a volume of 1000 cm3 at 2.19 MN/m2. What is its bulk modulus of elasticity in MPa? Round off your answer to two decimal places.