A tensile stress is to be applied along the axis of a cylindrical brass rod with diameter of 15 mm. What is the load magnitude required to produce a 3.5 x 10² m change in diameter if the deformation is entirely elastic?

A tensile stress is to be applied along the axis of a cylindrical brass rod with diameter of 15 mm. What is the load magnitude required to produce a 3.5 x 10² m change in diameter if the deformation is entirely elastic?

Physics for Scientists and Engineers with Modern Physics

10th Edition

ISBN:9781337553292

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter14: Fluid Mechanics

Section: Chapter Questions

Problem 7P: Review. A solid sphere of brass (bulk modulus of 14.0 1010 N/m2) with a diameter of 3.00 m is...

See similar textbooks

Related questions

Q: A steel cube of side length L = 0.5 m is subjected to a shearing force of 5000N along the top…

Q: A large uniform cylindrical steel rod of density ρ = 7.8 g/cm3 is 2.0 m long and has a diameter of…

Q: In regions of the cardiovascular system where there is steady laminar blood flow, the shear stress…

Q: A high-carbon steel wire, circular in cross-section, has a diameter of 14 mm. What is the force (in…

Q: A horizontal aluminum rod 4.7 cm in diameter projects4.4 cm from a wall. A 1100 kg object is…

Q: A tensile stress is to applied along the long axis of a cylindrical brass rod that has a diameter of…

Q: In the Challenger Deep of the Marianas Trench, the depth of seawater is 10.9 km and the pressure is…

Q: The modulus of elasticity of a certain steel material is 200 GPa (Giga Pascal). What is the strain…

A: Modulus of elasticity for a material is defined as the ratio of stress to strain in a body. In this…

Q: A tensile stress is to be applied along the long axis of a cylindrical brass rod that has a diameter…

Q: Calculate the strain of a brass rod of length 250 mm which is subjected to a tensile load of 50 kN…

A: Length , L = 250 mm Elongation , ∆L = 0.2 mm Load , F = 50 kN To find = Strain

Q: A horizontal aluminum rod 4.8 cm in diameter projects 5.3 cm from a wall.A 1200 kg object is…

Q: A tangential force of 0.004 KN affected the upper surface of a rectangle 5 mm high, 3 cm long and 5…

A: Given Dimensions, l=3 cm= 3×10-2mw=5 cm=5×10-2mh=5mm=5×10-3m Tangential force, F=0.004 KN= 4N…

Q: When a tension is applied to an aluminum wire it stretches 0.1 m. The initial length of the wire is…

A: The solution can be given as follows :-

Q: The maximum upward acceleration of a lift of total mass 2500 kg is 0.5 ms, The lift is supported by…

A: Answer 2.575 X 10-4m2

Q: What is maximum diameter of brass rod if it has to support a 400N load without exceeding its elastic…

A: Let Y be the stress on the brass rod, F be the load, A be the cross-sectional area, and D be the…

Q: е. The elastic limit of a steel elevator cable is 275 MPa. What is the maximum upward acceleration…

Q: 10) A femur bone of length 30 cm and diameter 2.5 cm is subjected to a compressive tress of 1.5 *10…

Q: A solid steel sphere with a radius of 2.0 m falls off a ship and sinks to a depth where the pressure…

Q: I the stress experience when deformation is caused by tangential forces to the surface * O Inertia O…

A: The stress experienced when force is applied perpendicular to surface is called compressive stress .

Q: A rubber band 20 cm long has a cross-sectional area of 4mm^2. What load will stretch the rubber band…

A: ΔL=Elongation of rubber band=1 mm=1×10−3 mF=LoadA=Cross-sectional area=4 mm2=4×10−6 mE=Modulus of…

Q: 'One end of a steel rod of radius R = 10mm and length L = 90 cm is held in a vise. A force of…

Q: Two strips of metal are riveted together at their ends by four rivets, each of diameter 6.0 mm. What…

A: Given, Diameter of the metal bar, d = 6.0 mm = 6.0 × 10–3 mRadius, r = d/2 = 2.5 × 10-3 m Maximum…

Q: Nylon breaks when the tensile stress within it reaches 1.0 x 10 ’ Pa. Which range below includes the…

A: Given data: The stress in thread is σ=1×109 Pa. The diameter of thread is d=1.00 mm.

Q: For the connection shown, the average shear stress in the 19-mm-diameter bolts must be limited to…

Q: The pressure increases by 1.0 x 104 N/m2 for every meter of depth beneath the surface of the ocean.…

A: Given: The increase in pressure is 1.0×104 N/m2 per meter. The bulk modulus of Pyrex is 2.6×1010…

Q: If the deformation produced in 20 mm length rod is 0.085 mm, the strain is equal to: Select one: a.…

A: (d) 0.00425

Q: Consider a steel bolt as a cylinder with a diameter of 3.41 cm and length of 13.8 cm. A shear or…

A: diameter of 3.41 cm length of 13.8 cm shear stress of 313 MN/m ² shear Modulus Ssteel =G= 8.4×…

Q: After a fall, a 80 kg rock climber finds himself dangling from the end of a rope that had been 14m…

Q: The legs of a weight lifter must ultimately support the weights he has lifted. A human tibia…

A: Given data- For human tibia (shinbone) outer diameter Dout=3.6 cm=0.036 m inner diameter Din=2.5…

Q: A mass of 35.0 kg is suspended from a steel wire of diameter 1.00 mm and length 11.3 m. How much…

A: Stress is defined as the force applied per unit area and it is given as σ = FA…

Q: A 50-N force is applied to a metal rod with a length of 10 m and a cross-sectional area of 1.0 x…

Q: A box-shaped piece of gelatin dessert has a top area of 15 cm² and a height of 3.0 cm. When a…

A: Given, Area A = 15 cm2 Height h = 3.0 cm Force F = 0.50 N

Q: The five-bolt connection must support an applied load of P = 3400 lb. If the average shear stress in…

Q: A metallic cube whose each side is 10 cm is subjected to a shearing force of 100 kgf. The top face…

Q: Find the modulus of elasticity of a brass rod of cross section 20 mm x 20 mm, and length 248 mm…

A: Tensile load(T)= 50 KN Elongation (e)= 0.25 mm = 2.5× 10-⁴ m Length of the rod(L)= 248 mm= 0.248 m…

Q: In regions of the cardiovascular system where there is steady laminar blood flow, the shear stress…

A: Convert the shear stress on cells in N/m2.

Q: A square flat plate of dimensions 1 m x 1 m is moving with a maximum speed , U causing a fully…

A: The given values are, A=1 m×1 m=1 m2ρ=1.2 kg/m3υ=1.5×10-5 m2/s

Q: The ratio of stress to strain (o-4 / ɛ ) in the linear elastic region is . . called Young's

A: Y = streas/strain

Q: A rope of length 40.0 meters and 5.0 mm in diameter elongates by 1.0 meters when supporting a 50.0…

A: Given data: Original Length (L) = 40.0 m Diameter (d) = 5.0 mm = 5.0 × 10-3 m Elongation in length…

Q: A bar of an advanced alloy having an elastic modulus of 107 GPa and an original diameter of 3.8 mm…

Q: A 3m long steel bar whose diameter is 25 mm is compressed by a 25 KN force. If the value of the…

A: The stress is defined as the force per unit area.

Q: When the material is in the region of the stress-strain curve, the material can go back to its…

A: Answer (C) Elastic, temporarily

Q: The five-bolt connection shown in the figure must support an applied load of P = 270 kN. If the…

A: Stress is defined as the force experienced by the object in unit area which causes change or…

Q: A cylindrical specimen of some metal alloy of 8 mm in diameter is stressed elastically in tension. A…

Q: The face of an aluminum plate, which is fixed in place, measures 90 cm by 90 cm. The thickness of…

Q: A copper wire of length 3-m and 1-mm diameter is subjected to a tension of 5-N. Calculate the…

A: Given: The length of the wire is 3 m. The diameter of the wire is 1 mm. The tenson in the wire is 5…

Q: A 30.0 kg hammer strikes a steel spike 2.30 cm in diameter while moving with speed 20.0 m/s. The…

A: Given : Mass of hammer is 30.0 kg Hammer rebounds speed is 10.0 m/s

Q: A steel rectangular block, a = 2.4cm wide and b =1.2 cm deep, is subjected to an axial tensile load…

A: Modulus of elasticity for a volume object is known as Bulk modulus of elasticity.

Q: Two strips of metal are riveted together at their ends by four rivets, each of diameter 8.0 mm. What…

A: Diameter of each rivet,

Concept explainers

Mechanical Properties of Solids

There are three types of matter- solid, liquid and gas. Out of them, solids have a rigid shaped and size. The intermolecular forces of attractions in solids are greatest. Mechanical properties are the physical properties of a material which it shows, when it is provided with certain amount of force or load. These properties are to be kept in mind for various purposes. When a force is applied to an object, the object may or may not get deformed depending upon its elastic property. But every time the object develops a restoring force against the force applied. This is commonly known as stress. If the object changes its dimensions due to the force applied it develops strain ( which is the ratio of change in dimension to the original dimension).

Question

1. A tensile stress is to be applied along the axis of a cylindrical brass rod with diameter of 15 mm. What
is the load magnitude required to produce a 3.5 x 102 m change in diameter if the deformation is
entirely elastic?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

Assume Youngs modulus for bone is 1.50 1010 N/m2. The bone breaks if stress greater than 1.50 108 N/m2 is imposed on it. (a) What is the maximum force that can be exerted on the femur bone in the leg if it has a minimum effective diameter of 2.50 cm? (b) If this much force is applied compressively, by how much does the 25.0-cm-long bone shorten?
A disk between vertebrae in the spine is subjected to a shearing force of 600 N. Find its shear deformation, taking it to have the shear modulus of 1109 N /m2. The disk is equivalent to a solid cylinder 0.700 cm high and 4.00 cm in diameter.
Review. On a day that the temperature is 20.0C, a concrete walk is poured in such a way that the ends of the walk are unable to move. Take Youngs modulus for concrete to be 7.00 109 N/m2 and the compressive strength to be 2.00 109 N/m2. (a) What is the stress in the cement on a hot day of 50.0C? (b) Does the concrete fracture?
A high-speed lifting mechanism supports an 800.-kg object with a steel cable that is 25.0 m long and 4.00 cm2 in cross-sectional area. (a) Determine the elongation of the cable. (b) By what additional amount does the cable increase in length if the object is accelerated upward at a rate of 3.0 m/s2? (c) What is the greatest mass that can be accelerated upward at 3.0 m/s2 if the stress in the fable is not to exceed the elastic limit of the cable, which is 2.2 108 Pa?
(a) When water freezes, its volume increases by 9.05% (that is, V/V0=9.05102 ). What force per unit area is water capable of exerting on a container when it freezes? (It is acceptable to use the bulk modulus of water in this problem.) (b) Is it surprising that such forces can fracture engine blocks, boulders, and the like?
During heavy lifting, a disk between spinal vertebrae is subjected to a 5000-N compressional force. (a) What pressure is created, assuming that the disk has a uniform circular cross section 2.00 cm in radius? (b) What deformation is produced if the disk is 0.800 cm thick and has a Young's modulus of 1.5109N/m2 ?
A high-speed lifting mechanism supports an 800.-kg object with a steel cable that is 25.0 m long and 4.00 cm2 in cross-sectional area. (a) Determine the elongation of the cable. (b) By what additional amount does the cable increase in length if the object is accelerated upward at a rate of 3.0 m/s2? (c) What is the greatest mass that can be accelerated upward at 3.0 m/s2 if the stress in the fable is not to exceed the elastic limit of the cable, which is 2.2 108 Pa?
Normal forces of magnitude 1.0106N are applied uniformly to a spherical surface enclosing a volume of a liquid. This causes the radius of the surface to decrease from 50.000 cm to 49.995 cm. What is the bulk modulus of the liquid?
A 100-N weight is attached to a free end of a metallic wire that hangs from the ceiling. When a second 100-N weight is added to the wire, it stretches 3.0 mm. The diameter and the length of the wire are 1.0 mm and2.0 m, respectively. What is Young’s modulus of the metal used to manufacture the wire?
(a) Estimate the force with which a karate master strikes a board, assuming the hands speed at the moment of impact is 10.0 m/s and decreases to 1.00 m/s during a 0.002 00-s time interval of contact between the hand and the board. The mass of his hand and arm is 1.00 kg. (b) Estimate the shear stress, assuming this force is exerted on a 1.00-cm-thick pine board that is 10.0 cm wide, (c) If the maximum shear stress a pine board can support before breaking is 3.60 106 N/m2, will the board break?
Alarge uniform cylindrical steel rod of density =7.8g/cm3 is 2.0 m long and has a diameter of 5.0 cm. the rod is fastened to a concrete floor with its long axis vertical.what is the normal stress in the rod at the cross-section located at (a)1.0 mfrom its lower end?(b)1.5 m from the lower end?
What Is Static Equilibrium? Problems 13 are grouped. 1. C A ball is attached to a strong, lightweight rod (Fig. P14.1). The rod is supported by a horizontal pin near the top. The ball is at rest. Is the ball in static equilibrium? If not, why not? If so, which type of equilibrium is itstable, unstable, or neutral? Hint: What would happen if you displaced the ball slightly? FIGURE P14.1