A three-phase, 12-kV, 60 Hz, 6 pole wye connected synchronous generator has synchronous reactance of 15 Ω per phase and negligible armature resistance. For a given field current, the open circuit voltage is 13 kV. Determine the following: A) Terminal Voltage B) Excitation voltage EA at maximum power C) The maximum power developed by the generator and pullout torque

A three-phase, 12-kV, 60 Hz, 6 pole wye connected synchronous generator has synchronous reactance of 15 Ω per phase and negligible armature resistance. For a given field current, the open circuit voltage is 13 kV. Determine the following: A) Terminal Voltage B) Excitation voltage EA at maximum power C) The maximum power developed by the generator and pullout torque

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

A three-phase, 12-kV, 60 Hz, 6 pole wye connected synchronous generator has synchronous reactance of 15 Ω per phase and negligible armature resistance. For a given field current, the open circuit voltage is 13 kV. Determine the following:(A) Terminal Voltage b) Excitation voltage EA at maximum powerc) The maximum power developed by the generator
A 3 phase 4MVA, 12 kV star connected synchronous generator has Zs= 0.8+J30 ohm. Using circle diagram only, find: 1. The output power developed at unity power factor with excitation equal to 1.25 of rated voltage. 2. The load angle and power factor if the generator supplies (1500 KW) at rated voltage and excitation lequal to (1.2) of rated voltage. 3. Repeat part (2) when .armature resistance is neglected
A three-phase Y-connected synchronous generator has rated values of 90 MVA, 15 kV, 0.6 reverse power factor, 50-Hz. Synchronous reactance 1.6 ohmsand armature resistance is neglected. According to thisa) Find the induced voltage (EA) and armature current (LA). b) Find the voltage regulation.c) If this generator was operated at 60 Hz with the same armature and field losses as at 50 Hz; What would be the voltage, apparent power and reactance of the generator
A 3 phase, star connected synchronous generator supplies current of 10A having phase angle of 20º lagging at 400V. Find the load angle and the components of armature current Id and Iq if Xd = 10 ohm and Xq = 6.5 ohm Assume armature resistances to be negligible
A three-phase, Y-connected, 220 V, 5 kVA, salient-pole synchronous generator is employed to supply power to a load with unitary fp. By means of a slip test, the direct-axis synchronous reactance is determined to be 12 Ω and the quadrature-axis synchronous reactance, 7 Ω. Consider that the rated current is delivered to the load at the rated voltage and that the armature resistance is negligible. (a) Calculate the corresponding value of the excitation voltage. (b) What is the value of the internal phase shift angle? (c) What is the value of the power angle?
A 70-MVA, 69.3-kV, three-phase round-rotor synchronous generator has a synchronous reactance of 14 ohm per phase and negligible armature resistance. 1) The generator is delivering rated power at 0.87 power factor lagging at the rated terminal voltage to an infinite bus bar (Fig. 1). Determine the magnitude of the generated emf per phase and the power angle δ. 2) The generator is delivering 53.5 MW to the bus bar at the rated voltage with its field current adjusted for a generated emf of 46 kV per phase. Determine the armature current and the power factor. Is the power factor is lagging or leading? 3) Given that the generator is operating at the excitation voltage of Part (1), determine the maximum steady-state power which the machine can deliver without losing synchronism. Find the armature current corresponding to this maximum power.
A 440 V, 3-phase, delta connected cylindrical synchronous motor with synchronous reactance of Xsm=2Ω is connected to a turbo-generator with Xsg=3Ω through transmission line of reactance Xtr=1.5Ω. If its field current is adjusted to give an excitation voltage of 12 Kv, then Calculate: (a) Calculate the maximum magnitude of the resultant flux emf? (b) Calculate the magnitude of armature current and its P.F? (c) Calculate the magnitude of the armature current in phase with stator voltage? (d) Calculate the maximum power output from the motor? (e) Compute the excitation voltage Ef on a per unit basis, when the generator is delivering rated KVA at rated voltagee and at power factor of (i) 0.8 lagging and (ii)0.8 leading? (f) Draw the complete phasor diagram and show that armature current leading the terminal voltage?
A 60 MVA, 69.3kV, three-phase synchronous generator has a synchronous reactance of 15 ohms/phase and negligible armature resistance. The generator is delivering rated power at 0.8 power factor lagging at the rated terminal voltage to an infinite bus bar. What is the maximum three-phase power that can be generator can deliver before losing its synchronism?
Open circuit tests carried out on a 3.5 MVA, 4.16 kV, 60 Hz, three phase star connected synchronous generator gave the following results:If (A):1015202530EL (kV):3.54.165.76.257.95In the short circuit test a field current of 20A was needed to circulate full load current. The armature winding resistance is 1.2Ω /phase, the field winding resistance is 500 Ω and the rotational loss is 250kW. Determine the power angle, the voltage regulation and the efficiency when the generator delivers rated load at terminal voltage of 4.4 kV and at 0.8 power factor leading.Draw the power flow diagram for the generator and include all values of power flows.
A three phase, 50 Hz, 4800V, 6 pole Y-connected synchronous generator connected to an infinite bus (constant voltage at 4800V) and has synchronous reactance of 20Ω per phase and negligible armature resistance. The generator is delivering 1 MW at a power angle of 30 degrees.. Calculate the following:1. Output torque of the generator2. Excitation voltage Ea3. Armature current4. Power factor5. Reactive power delivered
2.A 10-MVA 4.6-kV 60-Hz 6-pole three phase synchronous generator has armature resistance of 2 ohms and synchronous reactance of 6 ohms. It is operated at rated frequency to supply rated load at rated voltage at a power factor of 0.9 lagging. Assume mechanical losses are negligible. a.Determine the magnitude of the line-to-line excitation voltage. b.Determine the input power for the generator, in MW. (Please compute in W or kW before converting to MW)
A shunt generator supplies a 31kW load at 230V through cables of resistance, R = 122mΩ. If the field winding resistance, Rf =50Ω and the armature resistance, Ra =51mΩ. Determine the following below: The terminal voltage is, Answer and unit for part 1 The e.m.f. generated in the armature is,