A transducer's certificate of calibration (excerpt below) identifies two instrument errors with uncertainties at 95% confidence over it range. Resolution Range Linearity error Hysteresis error 0.25 N 0 to 200 N Within 0.2 N over range Within 0.3 N over range 1. Estimate the instrument design-stage uncertainty. 2. What is the instrument standard uncertainty?

A transducer's certificate of calibration (excerpt below) identifies two instrument errors with uncertainties at 95% confidence over it range. Resolution Range Linearity error Hysteresis error 0.25 N 0 to 200 N Within 0.2 N over range Within 0.3 N over range 1. Estimate the instrument design-stage uncertainty. 2. What is the instrument standard uncertainty?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The shear modulus, G, of an alloy can be determined by measuring the angular twist, θ,resulting from a torque applied to a cylindrical rod made from the alloy. For a rod of radius Rand a torque applied at a length L from a fixed end, the modulus is found by G=2LT/pR4θ.Examine the effect of the relative uncertainty of each measured variable on the shearmodulus. If during test planning all of the uncertainties are estimated to be 1%, what is theuncertainty in G?
The transducer specified in Table 1.1 is chosen to measurea nominal pressure of 500 cm H2O. The ambient temperature is expected to vary between 18 ∘C and 25 ∘C duringtests. Estimate the possible range (magnitude) of each listedelemental error affecting the measured pressure refering to the solution provided online, Sensitivity error(eK) = (±0.0025)(500 cm H2O)= ± 0.75 cm H2O = ± 0.00375 V how do you get 0.75?? shoud it not be 1.25? according the answer, for sensitivity
The actual value of pressure differential for flow across a venturimeter is 60 mm WC. The measured values using a pressure sensor are; Confidence level 95% mm WC 59.8,59.2,59.7,60.2,60.3,60.1,60.5 Estimate Bias uncertainty (1) Precision uncertainty (2) Total uncertainty (3)
A displacement transducer has the following specifications: Linearity error:±0.25% reading Drift:±0.05%/°C reading Sensitivity error: ±0.25% reading Excitation: 10-25 V Output: dc 0-5Vdc Range: 0-5 cm The transducer output is to be indicated on a voltme- ter having a stated accuracy of 0:1% reading with a resolution of 10 μV. The system is to be used at room temperature, which can vary by 10 °C. Estimate an uncertainty in a nominal displacement of 2 cm at the design stage. Assume 95% confidence.
Materials of Interest: CuFeS, in a silica matrix, 1.5% Cu (4.3318% CuFeS,); Top Size = 1.5 cm; CuFeS, grain size = 0.01 cm Desired sampling accuracy: +0.02% Cu, certainty of 0.99 (2.576 standard deviations) CuFeS, specific gravity=4.2: Overall specific gravity 2.8 Broad size distribution. Determine the minimum sample weight (in grams) needed for testing.
an automobile speedometer is graduated in 5 kmph increaments and has accuracy rated to be within 4% . estimate the 95% uncertainty in indicated speed at 90 kmph??
compute the 95 confidence intervals for the inventory of a series of 12 replication of the simulation of a system, where the VERAGE INVENtory is 1000 units and sample standard deviation is 38
The transducer specified in Table 1.1 is chosen to measurea nominal pressure of 500 cm H2O. The ambient temperature is expected to vary between 18 ∘C and 25 ∘C duringtests. Estimate the possible range (magnitude) of each listedelemental error affecting the measured pressure. How do I calculate the sensitivity error? The solution that was given: Sensitivity error(eK) = (±0.0025)(500 cm H2O)= ± 0.75 cm H2O = ± 0.00375 V My Question is, how do you obtain 0.75 since 0.0025 x 500 gives 1.25! please help. thanks
Do the two analytical methods provide results that are significantly different at the 95% confidence interval? Justify fully, showing all calculations, logic etc
n a certain dynamic measurement application the input(x) – output(y) relationship is given by y=1+(1+x)e^(-x) With what uncertainty must x be determined to yield a relative uncertainty of ±5 percent for y at a value of x = 2,4
Bearing used in an automotive application has a nominal inside diameter of 3.81 is expected to be cm.A random sample of 25 bearings is selected andaverage inner diameter of bearing3.8037 cm. exists as. bearing inner diameter σ=0.03 cm Standard deviation ofis known to be normally distributed. α=0.01 ; a) Test whether the bearing used has a nominal inside diameter of 3.81 cm. b) How to answer the question in part (a) by constructing a two-sided confidence interval on the mean diameter?explain that you can answer note: can you write the solutions legibly.
Measurement in Engineering Question is image C) ? c) Determine a 95% confidence interval for Nu and report the value.