A uniform horizontal beam, connected to the rigid wall with a pin joint, has a span of 10.0 m and a mass 25 kg. If a crate with a mass of 48.0 kg is placed on the right end of the beam, find the tension developed on the cable AB and the reaction force (magnitude and direction) on the pin joint at point C.

A uniform horizontal beam, connected to the rigid wall with a pin joint, has a span of 10.0 m and a mass 25 kg. If a crate with a mass of 48.0 kg is placed on the right end of the beam, find the tension developed on the cable AB and the reaction force (magnitude and direction) on the pin joint at point C.

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter10: Rotational Motion

Section: Chapter Questions

Problem 32P

See similar textbooks

Similar questions

A brass wire and a steel wire, both of the same length, are extended by 1.0 mm under the same force. Is the cross-sectional radius of the brass wire more, less, or equal to the cross-sectional radius of the steel wire? Explain. Youngs moduli for brass and steel are 1.0 1010 N/m2 and 2.0 1011 N/m2, respectively.
One end of a uniform 4.00-m-long rod of weight Fg is supported by a cable at an angle of = 37 with the rod. The other end rests against the wall, where it is held by friction as shown in Figure P12.23. The coefficient of static friction between the wall and the rod is s= 0.500. Determine tile minimum distance x from point A at which an additional object, also with the same weight Fg can be hung without causing the rod to slip at point A.
An aluminium (=2.7g/cm3) wire is suspended from the ceiling and hangs vertically. How long must the wire be before the stress at its upper end reaches the proportionality limit, which is 8.0107N/m2 ?
Problems 33 and 34 are paired. One end of a uniform beam that weighs 2.80 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in Figure P14.33. Find the tension in the cable. FIGURE P14.33 Problems 33 and 34.
A uniform plank of length 2.00 m and mass 30.0 kg is supported by three ropes, as indicated by the blue vectors. Find the tension in each rope when a 700 N person is d = 0.500 m from the left end
A uniform horizontal beam 10.0 m long and a mass of 82 kg is attached to support cables on either end. The cable on the left end makes an angle of 120 with x-axis and the cable on the right end makes an angle of 30̊ with the x-axis. If a person of mass 82 kg stands 7 m from the right end, find (a) the magnitude of the tensions TL and TR in the cables.
If the roller at B can sustain a maximum load of 4.5 kN, determine the largest magnitude of each of the three forces F that can be supported by the truss.
Two painters are carrying a uniform horizontal ladder that is 12 feet long and weighs 200 N. If one person applies an upward force equal to 85 N at one end, at what point does the other person lift?
If the resultant of the four forces is FR = {-360k}lb, determine the tension developed in each cable. Due to symmetry, the tension in the four cables is the same.
The walkway ABC of the footbridge is stiffened by adding the cable ADC and the short post of length L. If the tension in the cable is not to exceed 420 lb, what is the smallest value of L for which the 160-lb person can be supported at B?
The hanging mobile pictured above consists of two masses, m1 and m2, suspended from a uniform 10 cm long rod, which is in turn suspended from the ceiling at an angle of 70 degrees as pictured above. The mass m1 is 0.02 kg, while the mass of the rod is mr = 0.01 kg. Assuming the mobile is in a state of static equilibrium, find the value of mass m2.
A spade is modelled as a uniform rod, of mass 2kg and length 90cm, attached to a uniform square lamina, of side 20cm and mass 0.5kg. A gardener holds the spade horizontally with hands 30cm and 60cm from the end of the rod. Find the vertical forces exerted by the gardener's hands. Im stuck on this q, pls help.