A wire with resistance R is connected to the terminals of a 6.0 V battery. What is the potential difference ΔVends between the ends of the wire and the current I through it if the wire has the following resistances? (a) 1.0 Ω (b) 2.0 Ω (c) 3.0 Ω.

A wire with resistance R is connected to the terminals of a 6.0 V battery. What is the potential difference ΔVends between the ends of the wire and the current I through it if the wire has the following resistances? (a) 1.0 Ω (b) 2.0 Ω (c) 3.0 Ω.

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter28: Current And Resistance

Section: Chapter Questions

Problem 67PQ

See similar textbooks

Related questions

Q: 6. The current-density magnitude in a certain circular wire is J = (2.90 × 1010 A/m4) r, where r is…

A: First we need to find amount of current flowing through the wire, So given by: J = 2.90*10^10*r^2 We…

Q: How much current will flow through a 40.0-m length of metal wire with a radius of 0.0 mm if it is…

A: Length of wire, l= 40. 0 m Radius, r = 0.0 mm Power source supplying of 16.0 V

Q: If 5.0 × 1021 electrons pass through a 30.1 Q resistor in 10 min, what is the potential difference…

Q: In the figure R₁ = 5.240, R₂ = 15.70, and the ideal battery has emf & = 13.4 V. (a) What is the…

Q: Two conducting wires X and Y are made of copper-nickel and have equal lengths, but the resistance of…

Q: 1)A battery with 1.50 n of internal resistance is connected to two resistors of resistances R1 =…

A: Internal resistance of the battery (r) = 1.50 ohm R1 = 30 ohm R2 = 130 ohm I1 = 0.34 A

Q: Resistors v.B What is relationship between the resistances of objects A and B? RA = RB А: RA = 0.5 x…

A: The given values are, rA=RrB=2R

Q: A copper wire of 10 Q and length L. At what point along its length must the wire be cut out so that…

Q: = In the figure the current in resistance 6 is i6 = 1.39 A and the resistances are R₁ = R₂ = R3 =…

Q: A straight, cylindrical wire lying along the x axis has a length of 0.515 m and a diameter of 0.195…

Q: In the figure below, the current in resistance 6 is i6 = 1.20 A and the resistances are R1 = R2 = R3…

Q: Wires A and B, having equal lengths of 40.0 m and equal diameters of 2.94 mm, are connected in…

A: As per guidelines, only 3 subparts are solved here. Given, Length of wire A = 40m Length of wire B =…

Q: If R, has a resistance twice that of Ry, determine the value of Rx and R, in the figure and the…

Q: In the figure R₁ = 5.24 0, R₂ = 15.70, and the ideal battery has emf & = 13.4 V. (a) What is the…

Q: A piece of wire has resistance of 1.25 2. The wire is made of a material with resistivity 8.2x10-7…

Q: A potential difference of 1.00 V is maintained across a 10.0-V resistor for a period of 20.0 s. What…

A: Given Potential difference V = 1.00 VResistor R = 10.0Ωtime t = 20.0 s

Q: In the figure R1 = 7.06 Q, R2 = 21.2 Q, and the ideal battery has emf ɛ = 12.8 V. (a) What is the…

Q: A high-voltage copper transmission line with a diameter of 1.40 cm and a length of 120 km carries a…

Q: In the figure the current in resistance 6 is i6 = 1.31 A and the resistances are R₁ = R₂ = R3 = 2.12…

Q: In the figure the current in resistance 6 is ig = 1.37 A and the resistances are R1 = R2 = R3 = 2.07…

A: Given R1= R2=R3=2.07 ohm R4=14.0 ohm ,R5=8.87 ohm R6= 3.88 ohm I6 =1.37 A Suppose emf of battery…

Q: Using Kirchhoff's rules, find the following. (E, = 70.4 V, E2 = 62.0 V, and Ez = 79.0 V.) 4.00 kN E…

A: Current through E1, upward = i1 Current through E2, downward = i2 Current through E3, upward = i3…

Q: A copper wire has a circular cross section with a radius of 1.56 mm. HINT (a) If the wire carries a…

Q: In the circuit shown, 3 Ω a www 5 Ω h V+ g b + 7 V 4 V + f C 2V + d 6Ω www 4Ω e Determine the…

A: R1 = 5 ohm R2 = 3 ohm R3 = 4 ohm R4 = 6 ohm V1 = 7 V V2 = 2 V V3 = 4 V V4 = 6 V

Q: 5.00 2 8.00 2 6.00 V 7.00 V 9.00 V 10.0 2

Q: Three equally long meter-long copper wires with diameters of 1 mm, 2 mm and 3 mm are connected in…

A: The area of the first wire is, A1=πr12=πd124=3.141 mm24=0.785 mm2 The area of the second wire is,…

Q: In the figure the current in resistance 6 is i6 = 1.32 A and the resistances are R₁ = R₂ = R3 =…

Q: In the figure the current in resistance 6 is ig = 1.38 A and the resistances are R1 = R2 = R3 = 1.50…

Q: In the figure R1 = 6.40 Q, R2 = 19.2 Q, and the ideal battery has emf ɛ = 12.3 V. (a) What is the…

A: (a) The given circuit diagram can be redrawn as follows.

Q: = In the figure the current in resistance 6 is i6 = 1.47 A and the resistances are R₁ = R₂ = R3 =…

Q: Consider a thin aluminum wire with diameter d= 6 mm The resistivity of aluminum is 2.65x10-8 Q.m.…

A: Recall R=ρL/A

Q: Your answer is partially correct. In the figure the current in resistance 6 is ig = 1.49 A and the…

Q: A lightning bolt discharges 3.0 x 1021 electrons in 300 s. What is the average current during the…

Q: 12.0 N 4.00 N 5.00 N 6.00 N 8.00 0 (a) What is the equivalent resistance (in n) of the entire…

A: R1 = 12 ohm R2 = 6 ohm R3 = 5 ohm R4 = 4 ohm R5 = 8 ohm R1 and R2 are in parallel, therefore their…

Q: Copper conductor has a radius of 2mm with current I=10A, If n= 8.48x1023 electron/m3 then the drift…

Q: Wires A and B, having equal lengths of 40.0 m and equal diameters of 2.94 mm, are connected in…

A: Given length of wire A = length of wire B = 40 m diameter of wire A = diameter of wire B = 2.94 mm…

Q: copper wire is dCu = 0.0500 cm in diameter, 3.00 m long, and has a charge carrier density of…

Q: Consider a resistor in the form of a cylindrical wire of length L, radius r and resistance R. If the…

Q: Using Kirchhoff's rules, find the following. (E, = 71.0 V, E, = 61.8 V, and Ez = 79.8 V.) 4.00 kN d…

Q: A spool of copper wire 320 m long and with a diameter of 0.360 mm is at 20.0°C. For copper, the…

Q: In the figure the current in resistance 6 is i6 = 1.49 A and the resistances are R₁ = R₂ = R3 =…

A: First, we note in V4, that the voltage across R4 is equal to the sum of the voltages across R5 and…

Q: In the circuit shown, a b Determine the following: A. Magnitude and direction of the current B. The…

Q: A ribbon of material with a rectangular cross sectional area of (0.25 mm x 1.00 mm), length 21.9 cm…

A: The resistance of a material is proportional to R∝lAR=ρl A ρ=resistivity The…

Q: no flow oI is the total resistance, in ohms, of a 30-meter roll of a 0.32-m² copper wire? The…

Q: Consider a portable electric blanket that runs on a 6 V battery. If you use copper wire with a 0.75…

A: Given data: Battery voltage (V) = 6 V Wire diameter (D) = 0.75 mm = 0.75×10-3 m Power (P) = 15 W The…

Q: In the figure the current in resistance 6 is ig = 1.46 A and the resistances are R1 = R2 = R3 = 1.68…

Q: A rod of semiconducting material of length L = 4 m and cross-sectional area A = 3.5 mm2 lies along…

A: Given, L=4m A=3.5 mm2 V0=15+VL

Q: In the figure the current in resistance 6 is i6 = 1.38 A and the resistances are R₁ = R₂ = R3 =…

Q: In the figure the current in resistance 6 is i6 = 1.33 A and the resistances are R₁ = R₂ = R3 =…

Q: Two identical light bulbs, X and Y, are connected in parallel to a battery, with an internal…

A: Bulbs are connected in parallel . The internal resistance of the battery is r . Emf of the battery…

Question

A wire with resistance R is connected to the terminals of a 6.0 V battery. What is the potential difference ΔV_ends between the ends of the wire and the current I through it if the wire has the following resistances? (a) 1.0 Ω (b) 2.0 Ω (c) 3.0 Ω.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

A potential difference of 1.00 V is maintained across a 10.0- resistor for a period of 20.0 s. What total charge passes by a point in one of the wires connected to the resistor in this time interval? (a) 200 C (b) 20.0 C (c) 2.00 C (d) 0.005 00 C (e) 0.050 0 C
If the terminals of a battery with zero internal resistance are connected across two identical resistors in series, the total power delivered by the battery is 8.00 W. If the same battery is connected across the same resistors in parallel, what is the total power delivered by the battery? (a) 16.0 W (b) 32.0 W (c) 2.00 W (d) 4.00 W (e) none of those answers
A 12.0-V emf automobile battery has a terminal voltage of 16.0 V when being charged by a current of 10.0 A. (a) What is the battery’s internal resistance? (b) What power is dissipated inside the battery? (c) At what rate (in °C/min ) will its temperature increase if its mass is 20.0 kg and it has a specific heat of 0.300 kcal/kg • °C, assuming no heat escapes?
Taking R = 1.00 k and = 250 V in Figure P21.49, determine the direction and magnitude of the current in the horizontal wire between a and e. Figure P21.49
Power P0 = I0 V0 is delivered to a resistor of resistance R0. If the resistance is doubled (Rnew = 2R0) while the voltage is adjusted such that the current is constant, what are the ratios (a) Pnew/P0 and (b) Vnew/V0? If, instead, the resistance is held constant while Pnew = 2P0, what are the ratios (c) Vnew/V0, and (d) Inew/I0?
Explain why R=R0(1 + a?T) for the temperature variation of the resistance R of an object is not as accurate as P=P0(1 + a?T) which gives the temperature variation of resistivity P.
Calculate the equivalent resistance between points P and Q of the electrical network shown in Figure P29.80.
Three equally long meter-long copper wires with diameters of 1 mm, 2 mm and 3 mm are connected in series and connected to a voltage of 12 V. How much current flows through the wires (I)? What are the stresses on the individual sections (U1, U2, U3)? (specific resistance of copper is 0.017 Vmm2/ Am)
To what temperature must you raise a gold wire (c = 0.0034), originally at 20.0°C, to double its resistance, neglecting any changes in dimensions? (You can assume that resistivity varies with temperature linearly) 608.24 °C 546.32 °C 283.16 °C 314.12 °C
Three resistors of values R, 2R and 3R are connected together in series and in parallel with a cell with emf V What is the value of the current flowing from the cell? Select one: a.3V/R b.V/3R c.V/6R d.6V/R
Three resistors of values R, 2R and 3R are connected together in series and in parallel with a cell with emf V What is the value of the current flowing from the cell? Select one: a. V/6R b. 3V/R c. 6V/R d. V/3R
In the figure the resistances are R1 = 1.0 Ω and R2 = 2.0 Ω, and the ideal batteries have emfs ε1 = 2.9 V, and ε2 = ε3 = 3.7 V. What are the (a) size and direction (up or down) of the current in battery 1, the (c) size and direction of the current in battery 2, and the (e) size and direction of the current in battery 3?