Question 3а.In one of the giant telcos signal m(t) with a band-limited to 3.034 kHz is made to be sampled aa rate 33.01121% more than the Nyquist rate. The highest suitable error found in the sampleamplitude is given as 0.5100% with a peak amplitude mp. We are told that the quantizesamples are binary coded. Compute the least bandwidth of a channel necessary to transmithe encoded binary signal.b.As per the given information in a, above, if 24.0112 such signals are time-division multiplexeddetermine the minimum transmission bandwidth necessary to put on the air which is themultiplexed signal.c. Digital communication in our time today has made technology easier to live with. Discussthe compression techniques which are proposed for still images?d.Intersymbol interference (ISI) is one of hitches in telecommunication network which has overthe years affected the intelligence of signal quality. As a communication Engineer who hasbeen assigned to be in charge of the transmission unit, you are to discuss the best techniqueyou will employ to mitigate the ISI effect.

“Since you have asked multiple questions, we will solve the first question for you. If you want any…

а. In one of the giant telcos signal m(t) with a band-limited to 3.034 kHz is made to be sampled a rate 33.01121% more than the Nyquist rate. The highest suitable error found in the samp amplitude is given as 0.5100% with a peak amplitude mp. We are told that the quantize samples are binary coded. Compute the least bandwidth of a channel necessary to transm the encoded binary signal.

а. In one of the giant telcos signal m(t) with a band-limited to 3.034 kHz is made to be sampled a rate 33.01121% more than the Nyquist rate. The highest suitable error found in the samp amplitude is given as 0.5100% with a peak amplitude mp. We are told that the quantize samples are binary coded. Compute the least bandwidth of a channel necessary to transm the encoded binary signal.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A certain sampled-data system operates at a sampling rate of 10,000 sample/s. For Each case below, draw the sampled signal's spectrum up to the 2nd translated component with the corresponding appropriate frequency values.a. Determine the theoretical highest frequency in a baseband signal such that the signal could be reconstructed from samples taken by the system.b. Repeat part (a.) if a guard band of 4 kHz is to be established between the upper range of the baseband signal and the lower range of the first translated component. c. If for the same sampling rate a 6 kHz signal sampled, what range of frequencies will there be spectral overlapping?
Solve the following problem. Determine (a) the peak of frequency deviation, (b) minimum bandwidth, and (c) baud for a binary FSK signal with a mark frequency of 38 khz, a space frequency of 40 khz , and an input bitrate of 4 kbps
Consider the voltage of a baseband signal varies over the range -40V to 60V. This signal is sampled and quantized through an 8 - levels quantizer . What is the quantization noise ( in Volts ) corresponding to each of the following samples: 45V, 21V, and -15.5V?
An analog signal of maximum frequency component of 10 kHz is applied at the input of a PCM system with an uniform quantizer having 32 levels. What will be the Transmission bandwidth of the PCM system? Please answer only if you are confident.
Q 5. A television signal (video and audio) has a bandwidth of 4.5 MHz. The signal is sampled,quantized and binary coded to obtain a Pulse Coded Modulated (PCM) signal.(a) Determine the sampling rate if the signal is to be sampled at a rate of 20% above theNyquist rate.(b) If the samples are quantized into 1024 levels, determine number of binary pulses (ordigits) required to encode each sample.(c) Determine the binary pulse rate (bits per second) of the binary coded signal.(d) Calculate minimum bandwidth required to transmit this signal.
An analogue signal has a bandwidth that ranges from 15Hz to 10kHz.What is the rate of sampler and bandwidth of band limiting filter required if signal is stored within computer memory ,signal is transmitted over a network which has a bandwidth between 200Hz and 3.4kHz and what is the difference between quantization noise and signal to noise ratio expected in the transmission of signals in the above two occurrences (assuming @ signal is sampled at 8 bits per sample?
Which of the following is true about Signal-to-noise ratio? a. In linear codes, as the amplitude of a sample increases, SQR remains essentially constantb. SQR is inversely proportional with the amplitude of the signalc. SQR increases when the resolution is decreased.d. As the number of PCM bits increases, the SQR decreases
Problem1 A baseband signal with frequency components from near dc to 15 kHz frequency modulates a 200-kHz carrier, andthe frequency deviation is ±3 kHz. The signal is applied as the input to a cascade of two frequency triplers and onefrequency doubler. Determine the output (a) center frequency, (b) frequency deviation, and (c) deviation ratio (d) A VCO has an unmodulated carrier frequency of 100 MHz and sensitivity of −12 kHz#V. Determine thefrequency when the input signal is set at 5 V.
2) An analog signal Xa(t) = sin(480pit)+3sin(720pit) is sampled 600 times per second . a) determine the nyquist sampling rate for Xa(t) and the folding frequency ? b)what are the frequencies in radians, in the resulting discrete time signals x(n) ? c)if x(n) is passed through an ideal D/A converter , what is the reconstructed signal Ya(t) ?
Explain through equations what happen if there is a phase error θc between the transmitted QPSK signal and local (replica) carrier signals in coherent QPSKdemodulator. Then what happen if θc=90o
Design a 3rd order HPF without any kind of attenuation of ur original signal?
A base band signal used in European standard voice grade communication is represented by a band limited CT signal of triangular shape spectrum is sampled at fs=16 kHz. The spectrum of the sampled signal shows 4 kHz separation between the original signal spectrum and the next copy. (a) Find the maximum frequency in a CT signal. (b) Draw the spectrum of the sampled signal. (c) Find the cutoff frequency of the LPF used to recover of the original CT signal from the sampled signal. (d) Find the percentage of change in the sampling frequency from critical sampling.