Answered: A 10.0 V battery is connected to a 135…

A 10.0 V battery is connected to a 135 resistor. Ignoring the internal resistance of the battery, calculate the power delivered to the resistor.

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter29: Direct Current (dc) Circuits

Section: Chapter Questions

Problem 19PQ

See similar textbooks

Related questions

Q: You connect a 10.0 MΩ resistor in series with a 3.20 mFcapacitor and a battery with emf 9.00 V.…

A: R=Resistance=10 MΩC=Capacitance=3.2 mFε=EMF=9 Vt=Time=18 s I is the current at the given time and I0…

Q: When a R = 87.7 resistor is connected across a 11.3 V battery, a current of 113.2 mA flows. What is…

A: Emf = 11.3 V R = 87.7 ohm current = 113.2 mA = 0.1132 A

Q: A battery of 9V is connected in series with resistors of 0.2Ω, 0.3Ω, 0.4Ω ,0.5Ω and 12 Ω,…

Q: A battery with an emf of 18 V and internal resistance of 1.0 W is connected across a 5.0 W resistor.…

Q: In the circuit shown, find the power used by the 80 ohm resistor R=600 O 0.41 W 0.30 W O 0.52 W 0.63…

A: Given Data : The voltage of the battery is given as V = 10V. The resistance of the smaller resistor…

Q: A resistor draws 60 W power then connected across a potential difference of 120V. What power does…

Q: A 9V battery having an internal resistance 20 is connected to a load resistor of 88Q. The current…

Q: A 9V battery having an internal resistance 20 is connected to a load resistor of 880. The current…

A: SOlution: Given that V =9 V R =88 Ohm r = 2 Ohm

Q: When you connect a battery with emf 9.00 V to a resistor of resistance 12.0 Ω, energy is dissipated…

Q: \ 500. –N resistor, an uncharged 2.00 µF capacitor, and a 10.0 – V emf source are connected in s How…

Q: The Iceberg Kid, infamous for imposing a deep freeze on whoever disagrees with him, discovers that…

A: Given: The thermal energy is 185 J. The time interval is 6.19 s. The operating voltage is 12.0 V.

Q: When a R = 90 Q resistor is connected across a 12 V battery, a current of 122 mA flows. What is the…

A: The expression for find internal resistance of battery is I=εR+rr=εI-R Substitute values in the…

Q: If the terminals of a battery with zero internal resistance are connected across two identical…

A: Let the value of resistance in each resistor be R ΩWhen two resistors are in series the total…

Q: A component with a 17 ohm resistor is rated for use at power levels not exceeding 14 W. How do you…

A: Given:Resistance of the component = 17 ohmMaximum Power rating = 14 W

Q: resistance of an electric heater is 45 Ω when connected to 120 V. How much energy does it use…

Q: When a R = 88.9 Q resistor is connected across a 11.1 V battery, a current of 113.9 mA flows. What…

A: Taking 'r' to be the internal resistance of the battery, so the total equivalent resistance of the…

Q: When a R =88.7 Q resistor is connected across a 11.1 V battery, a current of 112.8 mA flows. What is…

Q: A 12V battery having an internal resistance 62 is connected to a load resistor. The current through…

Q: A 10V, 650HZ, source is connected to a series combination of R =1002, C =10µF and L= 0.15H. Find out…

Q: Compute the equivalent resistance of the network in the given figure, and find the current in each…

A: Given data: Resistances: R1=1.00 ΩR2=3.00 ΩR3=7.00 ΩR4=5.00 Ω Emf: ε=48.0 V

Q: A battery with an emf of 40 V and internal resistance of 0.2 Q is connected across a load resistor…

A: The relation between the current and the voltage is given by V = I R where, I is the current, R is…

Q: When a R = 92.3 Q resistor is connected across a 12.3 V battery, a current of 123.2 mA flows. What…

A: Given : E = 12.3 V R =92.3 Ω i = 123.2 mA INTERNAL RESISTANCE : i=ER+r Plug given values we get…

Q: A light bulb is rated at 30 W when operated at 120 V. How much charge enters (and leaves) the light…

A: Given, Power P = 30 W Voltage V = 120 V time t = 4.1 min = 4.1 * 60 = 246 sec

Q: In the circuit shown, the battery has EMF of c=32 V. At what rate is thermal energy being generated…

Q: A storage battery has an emf of 6.7 V and internal resistance of 0.50. Compute for the terminal…

Q: A 27 Ω component is connected to a 12 V battery. How much energy is expended per second?

A: Energy expended per second is the power itself. P=V2R

Q: 13. The p.d. at the terminals of a battery is 16V when no load is connected and 14V when a load…

Q: A 12V battery having an internal resistance 60 is connected to a load resistor. The current through…

A: Given that A 12V battery having an internal resistance 60 is connected to a load resistor. The…

Q: The emf of a battery is E = 12 V . When the battery delivers a current of 1 A to a load, the…

A: Given: The emf of the battery is 12 V. The terminal voltage is 10 V. The current in the circuit is 1…

Q: The emf and the internal resistance of a battery are as shown in the figure below. If a current of…

A: Given: The emf is 95.0 V. The internal resistance is 5.0 ohm. The current is 3.2 A.

Q: Three resistors of 25 Ω, 30 Ω and an unknown resistance R are connected in parallel and the…

A: It is given that,

Q: An RC circuit without a battery contains a 239.0 k2 resistor and a fully charged capacitor that…

Q: A battery has an emf of 12.0 V and an internal resistance of 0.050 0 Ω. Its terminals are connected…

Q: current a) in the 4.00V battery, b) in the 3.002 resistor, c) in the 8.00V battery,

Q: A 300 ohms resistor and a 570 ohms resistor are in series. When this combination is connected across…

Q: A 6V battery having an internal resistance 60 is connected to a load resistor. The current through…

Q: The power dissipated by a resistor with a resistance of R = 100 Q is P = 2.0 W. What are the current…

Q: A 697 µF capacitor is discharged through a resistor, whereby its potential difference decreases from…

A: Capacitance, C = 697 μF Initially, V = 83.5 V Finally, V = 12.7 V Initially, t = 0 s Finally, t =…

Q: A 537×10−6 F capacitor is discharged through a resistor, whereby its potential difference decreases…

A: SOlution: Given that V = 21.9 V V0 = 86.5 V T = 4.65 s C = 537x10-6 F To find the resistance

Q: Calculate the terminal voltage for a battery with an internal resistance of 0.950 SN and an emf of…

A: (A) Given Data : The internal resistance of the battery is given as r=0.950 Ω The emf of the battery…

Q: A 2 nF capacitor with an initial charge of 16 micro.C is discharged through a 2000 ohm, the maximum…

Q: The heating element of an iron operates at 110 V with a current of 7 A. (a) What is the resistance…

A: Potential difference across the iron, V=110V Current across iron, I=7A Let the resistance and the…

Q: A resistor of unknown resistance is in series with a 20.00 resistor. A battery of emf 6.0V and…

Question

100%

A 10.0 V battery is connected to a 135 resistor. Ignoring the internal resistance of the battery, calculate the power delivered to the resistor.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Similar questions

A child's electronic toy is supplied by three 1.58-V alkaline cells having internal resistances of 0.0200 inseries with a 1.53-V carbon-zinc dry cell having a 0.100- internal resistance. The load resistance is 10.0 . (a) Draw a circuit diagram of the toy and itsbatteries, (b) What current flows? (c) How much power is supplied to the load? (d) What is the internal resistance of the dry cell if it goes bad, resulting in only 0.500 W being supplied to the load?
A rechargeable battery has an emf of 13.2 V and an internal resistance of 0.850 . It is charged by a 14.7-V power supply for a time interval of 1.80 h. Alter charging, the battery returns to its original state as it delivers a constant current to a load resistor over 7.30 h. Find the efficiency of the battery as an energy storage device. (The efficiency here is defined as the energy delivered to the load during discharge divided by the energy delivered by the 14.7-V power supply during the charging process.)
The power dissipated in a resistor is given by P = V2/R, which means power decreases if resistance increases. Yet this power is also given by P = I2R, which means power increases if resistance increases. Explain why there is no contradiction here.
A child’s electronic toy is supplied by three 1.58-V alkaline cells having internal resistances of 0.0200 in series with a 1.53-V carbon-zinc dry cell having a 0.100- internal resistance. The load resistance is 10.0 . (a) Draw a circuit diagram of the toy and its batteries, (b) What current flows? (c) How much power is supplied to the load? (d) What is the internal resistance of the dry cell if it goes bad, resulting in only 0.500 W being supplied to the load?
When resistors with different resistances are connected in series, which of the following must be the same for each resistor? Choose all correct answers. (a) potential difference (b) current (c) power delivered (d) charge entering each resistor in a given time interval (e) none of those answers
If the terminals of a battery with zero internal resistance are connected across two identical resistors in series, the total power delivered by the battery is 8.00 W. If the same battery is connected across the same resistors in parallel, what is the total power delivered by the battery? (a) 16.0 W (b) 32.0 W (c) 2.00 W (d) 4.00 W (e) none of those answers
Consider the circuit below. The battery has an emf of = 30.00 V and an internal resistance of r = 1,00 . (a) Find the equivalent resistance of the circuit and the current out of the battery. (b) Find the current through each resistor, (c) Find die potential drop across each resistor, (d) Find the power dissipated by each resistor, (e) Find the total power supplied by the batteries.
Show that the power dissipated by the load resistor is maximum when the resistance of the load resistor is equal to the internal resistance of the battery.
When resistors with different resistances are connected in parallel, which of the following must be the same for each resistor? Choose all correct answers, (a) potential difference (b) current (c) power delivered (d) charge entering each resistor in a given time interval (e) none of those answers
When two unknown resistors are connected in series with a battery, the battery delivers 225 W and carries a total current of 5.00 A. For the same total current, 50.0 W is delivered when the resistors are connected in parallel. Determine the value of each resistor.
Review. Ail aluminum rod has a resistance of 1.23 at 20.0C. Calculate the resistance of the rod at 120C by accounting for the changes in both the resistivity and the dimensions of the rod. The coefficient of linear expansion for aluminum is 2.40 10-6 (C)-1
Explain why R=R0(1 + a?T) for the temperature variation of the resistance R of an object is not as accurate as P=P0(1 + a?T) which gives the temperature variation of resistivity P.