AA רואד רחר בורו Determine the size (diameter and depth) of the secondary clarifier (s) at a municipal activated sludge treatment facility: The wastewater flow is 25,000 m³/d, the recycle ratio (recycle sludge flow/wastewater flow) is 0.25. The suspended solids concentration is assumed to be 2500 mg/L in the activated sludge tank. The over flow rate is 50 m3/d- m2 and solids loading is 125 kg/d-m2. Estimate detention time if the depth is 4.5 m. What would be the weir loading?

AA רואד רחר בורו Determine the size (diameter and depth) of the secondary clarifier (s) at a municipal activated sludge treatment facility: The wastewater flow is 25,000 m³/d, the recycle ratio (recycle sludge flow/wastewater flow) is 0.25. The suspended solids concentration is assumed to be 2500 mg/L in the activated sludge tank. The over flow rate is 50 m3/d- m2 and solids loading is 125 kg/d-m2. Estimate detention time if the depth is 4.5 m. What would be the weir loading?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The 550-bed Atlanta Hospital has a small, activated sludge plant to treat wastewater from the hospital. The average daily hospital discharge is 1.50 m3 per day per bed, and the average soluble BOD5 after primary settling is 450 mg/L. The aeration tank effective liguid dimensions of 10 m x 10 m x 5 m. The plant operating parameters are as follows: MLVSS - 2,600 mg/L; MLSS - 1.20 (MLVSS); Settling sludge volume after 30 min. = 200 mL/L. The aeration time is nearly?
The 550-bed Atlanta Hospital has a small, activated sludge plant to treat wastewater from the hospital. The average daily hospital discharge is 1.50 m3 per day per bed, and the average soluble BOD5 after primary settling is 450 mg/L. The aeration tank effective liguid dimensions of 10 m x 10 m x 5 m. The plant operating parameters are as follows: MLVSS - 2,600 mg/L; MLSS - 1.20 (MLVSS); Settling sludge volume after 30 min. = 200 mL/L. The F/M ratio is nearly?
The quantity of sludge produced from an aeration tank is 2,453 kg/day. The volume of the aeration tank is 8,500 m3 and the yield is 0.55 mg VSS/mg BOD5. The water retention time is 1 day and the inlet BOD5 is 540 mg/L. Calculate the outlet BOD5 in the tank?
The aeration tank for a completely mixed aeration process is being sized for a design wastewater flow of 4500 m³/d. The influent COD is 150 mg/L. The design effluent COD is 7 mg/L. Recommended design parameters are a sludge age of 10 days and MLVSS of 1400 mg/L. The expected Sludge Volume Index is 100 ml/g. The selection of these values takes into account the anticipated variations in wastewater flows and strengths. The kinetic constants from a bench-scale treatability study are Y = 0.60 mg VSS/mg COD and ke = 0.06 per day. Calculate: a. the hydraulic residence time and volume of the aeration tank b. the food/microorganism ratio c. the sludge production rate d. the sludge recycle ratio e. the oxygen requirement
The aeration tank for a completely mixed aeration process is being sized for a designwastewater flow of 4500 m3/d. The influent COD is 150 mg/L. The design effluent COD is7 mg/L. Recommended design parameters are a sludge age of 10 days and MLVSS of 1400 mg/L. The expected Sludge Volume Index is 100 ml/g. The selection of these values takes into account the anticipated variations in wastewater flows and strengths. The kinetic constants from a bench-scale treatability study are Y = 0.60 mg VSS/mg COD and ke = 0.06 per day. Calculate:a. the hydraulic residence time and volume of the aeration tankb. the food/microorganism ratioc. the sludge production rated. the sludge recycle ratioe. the oxygen requirement
The shrimp processing plant generates 0.012 m3/s of wastewater each day. The wastewater is treated in an activated sludge plant. The average BOD5 of the raw wastewater before primary settling is 1400 mg/L. The aeration tank has effective liquid dimensions of 8.0 m wide by 8.0 m long by 5.0 m deep. The plant operating parameters are as follows: Soluble BOD5 after primary settling = 966 mg/L MLVSS = 2000 mg/L MLSS = 1.25 (MLVS) Settled sludge volume after 30 min = 225 mL/L Aeration tank liquid temperature = 15°C Determine the following: Return Activated Sludge (RAS) flow rate and Wasting Activated Sludge (WAS) flow rate.
a) An activated sludge plant with recycle is evaluating its secondary clarification system. Settling column tests are conducted and analyzed for settling velocities at different initial solids concentrations. The data are provided below. The plant flow rate is 10,000 m3/d, with a recirculation ratio of 0.5. The MLSS in the reactor is 4000 mg/L. The desired underflow concentration is 17,000 mg/L. Solids concentration mg/L Settling velocity m/h 1500 6.5 3000 5.1 4500 4 6000 2.95 7500 2 9000 1.4 12,000 0.5 15,000 0.27 17,000 0.2 b) Design secondary clarifiers for the activated sludge plant of problem a), with a recycle ratio of 0.6. Calculate the required surface area if two clarifiers are used. Also calculate underflow rate, underflow velocity, and overflow rates. Clearly state your assumptions.
An activated sludge plant with recycle is evaluating its secondary clarification system. Settling column tests are conducted and analyzed for settling velocities at different initial solids concentrations. The data are provided below. The plant flow rate is 10,000 m3/d, with a recirculation ratio of 0.5. The MLSS in the reactor is 4000 mg/L. The desired underflow concentration is 17,000 mg/L. Solids concentration mg/L Settling velocity m/h 1500 6.5 3000 5.1 4500 4 6000 2.95 7500 2 9000 1.4 12,000 0.5 15,000 0.27 17,000 0.2 a. Calculate the required surface area if one clarifier is used. b. Calculate underflow rate, underflow velocity, and overflow rate for single clarifier design. Clearly state your assumptions. c. Calculate the required surface area if two clarifiers are used
An aeration tank has an MLSS concentration of 2000 mg/L. After settling for 30 min. in a 1-L graduated cylinder, the sludge volume is measured to be 150 mL. Compute the SVI of the sludge.
A small town has been directed to upgrade its primary wastewater treatment plant to a secondary plant that can meet an effluent standard of 25.0 mg/L BOD5 and 30.0 mg/L suspended solids. They have selected a completely mixed activated sludge system. The following data are available from the existing primary plant. Existing plant effluent characteristics: Flow = 0.2000 m3 /s soluble BOD5 = 80 mg/L Assume that the BOD5 of the suspended solids may be estimated as equal to 50% of the suspended solids concentration, the microorganism concentration in the aeration tank (MLVSS) is 2000 mg/L, and the net activated sludge produced is 400.0 kg/d; also assume the following values for the growth constants: bacterial decay rate = 0.10 day-1 , yield coefficient = 0.60 mgVSS ∙ mg-1 BOD5 removed, maximum specific growth rate constant = 2.50 day-1 , and half saturation constant = 100 mg/L. (1) Estimate the volume of the aeration tank; (2) Compute the F/M ratio; (3) If the BOD5 is 60% of the ultimate…
A wastewater treatment plant will receive a flow of 30,000 m3/day. The plant has a 3.6 m deep circular primary clarifier with a surface overflow rate of 60.0 m3/m2-day.a. Calculate the surface area (m2), diameter (m), volume (m3), and hydraulic retention time of the primary clarifier.b. How long will it take a 1.0 mm particle with a density of 1500 kg/m3to settle in the primary clarifier? show all work
It is desired to design an activated sludge process to treat 20,000 m3/d of settled wastewater with a BOD of 250 mg/L and nbVSS concentration of 10 mg/L. If the effluent BOD is not to exceed 20 mg/L, calculate the volume of the aeration tank required, sludge wastage rate, sludge return rate, oxygen requirements, F/M ratio, specific utilization rate, specific growth rate, and maximum specific growth rate. The following data and coefficients are applicable. i. Mean cell residence time = 5 daysii. Y = 0.5 gVSS/g BODiii. Kd = 0.10 /div. K = 5 /dv. Return sludge concentration = 8,000 mg/L VSSvi. Mixed liquor volatile suspended solids concentration = 2500 mg/Lvii. Effluent contains 20 mg/L suspended solids of which 65% are biodegradable.viii. Fraction of biomass remaining as cell debris = 0.15ix. BOD5/BODu = 0.68